ANKER A2590 PowerWave 3-in-1 Station with Watch Charging Cable Holder Instruction Manual
- June 6, 2024
- Anker
Table of Contents
ANKER A2590 PowerWave 3-in-1 Station with Watch Charging Cable Holder
Instruction Manual
English
| LED Indicator | Status |
|---|---|
| Solid blue for 3 seconds, then turns off | Connected to power |
| Solid blue | Charging |
| Flashing blue | Metal object detected |
Flashing green
| • Overvoltage or undervoltage protection
• Incompatible AC adapter connected, indicating that you should switch to a Quick Charge 2.0/3.0 wall charger or a USB-C wall charger that supports Power Delivery
- To charge your Apple Watch, use your original Apple Watch Magnetic Charging Cable (0.33 ft/1 m).
- Do not connect to a 5V USB-A wall charger or a USB port on a computer as it may affect the wireless charging function.
- Using an ultra-thick protective phone case or a case with a magnetic/metal plate is not recommended as it may affect the wireless charging function.
- Do not place any foreign objects between your smartphone and the wireless charger’s surface, including metal pads on a car mount, credit cards, keys, coins, metal objects, or NFC cards, as it may cause overheating.
Important Safety Instructions
Please refer to the electrical and safety information before installing or operating the product.
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during use of this product must not exceed 40°C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
This product complies with the radio interference requirements of the European Community.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the
receiving antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. (4) Consult the dealer or an
experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator & your body. Product Name:
PowerWave 3-in-1 Station with Watch Charging Cable Holder Model: A2590
The following importer is the responsible party Company Name: Fantasia Trading
LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1
800 988 7973
IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference
RSS-Gen Issue 5 March 2019
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause
- This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2590 is in
compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://[www.anker.com/](http://www.anker.com/)
Radiated H-Field: -35.431dBuA/m (@10m)
TX/RX frequency range: 110-205KHz (for EU and UK only)
UK Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2590 is in
compliance with Radio Equipment Regulations 2017. The full text of the UK
declaration of conformity is available at the following internet address:
https://[www.anker.com](http://www.anker.com/)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom.
Specifications
| Input | 9V 3A / 15V 3A |
|---|
Output
| Wireless: 15W Max (for phones)
5W Max (for TWS Bluetooth earbuds) USB-A: 5V 1A
| Indoor use only.
---|---
| This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.