Gateway GATA31012 10.1 Inch Android Tablet User Guide
- June 6, 2024
- Gateway
Table of Contents
GATA31012 10.1 Inch Android Tablet
User Guide
Start Here Exterior Features
To Power On
Press and hold the power button To to power on. The device will boot up Power
On automatically.
To Power Off
During use, press and hold the power button for about 5 seconds To power off,
a system window Power Off will appear. Select “power off” followed by “ok.”
Device will shut down.
Sleep Mode
Tap the Power button to enter/exit sleep mode.
NOTE:
Please make sure to fully charge your device before powering on. For Spanish
users, go to “Settings” “System” – “Language & input”, then go to “Language”
to enter “Language preferences”, then click “Add a language”, then choose
“Espanol”, then choose your regions, then, on “Language preferences”
interface, press and move your language to the first place.
0 Front Camera
Touchscreen USB Type-C
Micro SD Slot
Earphone port
Rear Camera| Volume up
Volume down
Power Button
Reset Button
Speaker
---|---
What’s in the box
- Tablet
- Power Adapter
- quick Start Guide
- Warranty Book
Caution : The AC adapter included with your device was specifically designed and approved for your model. Utilization of an after-market adapter may damage either your device or other devices connected to it. If damage is determined to have been caused by the utilization of an unauthorized power supply, it will not be protected under warranty. For full user manual, please visit www.gatewayusa.com/support.html Gateway and the Gateway logo are the registered trademarks of Acer Inc. and are used under license from Acer America Corporation. www.gatewayusa.com 1 Customer Service: 877-777-0649
FCC regulatory conformance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference. (2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.