Gateway GWNR51416 AC Power Adaptor User Guide
- June 5, 2024
- Gateway
Table of Contents
Gateway GWNR51416 AC Power Adaptor
Plug Power Adapter Into Wall Outlet
Plug Power Adapter Into Laptop
Press and Release the Power Button
Exterior Features
- Touchpad
- Speakers
- Power Button
- Micro SD Slot
- Camera
- USB 3.0
- Headphone Port
- Charging port
- USB Type-C
This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may causeundesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device has also been tested against this SAR limit. This device was tested for
typical body-worn operations with the back of the handset kept 0mm from the
body. To maintain compliance with FCC RF exposure requirements, use
accessories that maintain a 0mm separation distance between the user’s body
and the back of the handset. The use of belt clips, holsters and similar
accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
Charging the Notebook
Please charge your Notebook fully before using it for the first time. Connect
the DC plug on the supplied power adapter to the charging socket (DC IN) on
the Notebook. Then plug the power adapter into a socket. The charging LED
lights up while the device is charging. Only leave the power adapter connected
to the socket until the battery of the battery of the Notebook is fully
charged. In addition, always disconnect the power adapter from the Notebook
when you are not charging the Notebook.
Turning on the Notebook for the first time
Bring the screen upwards until it is standing at a minimum angle of 90° to the
keyboard. Press the on/off switch for about 5 seconds to switch on the
Notebook. The setup assistant will then appear on the screen. Follow the setup
assistant instructions to set up your Notebook. During the start-up, the
wizard prompts you to register for your Microsoft account. If you do not yet
have a Microsoft account, please set one up here After completion of the
start-up, your Notebook is configured This may take several minutes to
complete. Do not turn the Notebook off during this time !
Unlocking the display
As soon as the device has been set up (and every time it is subsequently
switched on and booted up), the lock screen appears, Press any key on the
keyboard to unlock the screen. If your Notebook is password-protected, you
must then enter the password. Alternatively, you can also log into your
Notebook via Windows Hello. To activate and set up this feature, select
“Settings” →“Accounts” →“Sign-in options” → “Windows Hello”.
Start menu
To display the start menu, click the Windows icon in the bottom left of the
display or press the the Windows button on the keyboard. Press the icon a
second time to hide the Start menu. The Start menu consists of the classic
navigation list (A) and a useful app area (B) to the right of the navigation
list. Among other things, the navigation list includes a link to open Settings
(cog wheel icon).In the app area, you can pin apps and favourites in the form
of live tiles and organize them. In the navigation list (A) you find a list of
all installed apps in alphabetical order. An alphabetic quick access to the
navigation list appears when you click on a respective first letter.
The Action Center
The Info Center is a bar with quick links to some important Notebook
functions, which you can either display or hide.
To access the Info Center click the memo symbol in the bottom fight-hand
corner.
Activating WIFI and opening the browser
- Call up Settings(see “Start menu”).
- In the settings, click “Network & Internet”.
- Click “ Wi-Fi” on the left in the next screen.
- Click the slider or the word “Off”. The word “On” now appears next to the slider.
- The Notebook searches for all available for all available wireless networks nearby and then displays them as a list (“Show available networks”).
- Click the network that you wish to connect to.
- Enter the network key (password) if necessary.
- g . Click “Connect”. The Notebook connects to the selected network.
The button for launching the Internet browser can be found on the task bar at
the bottom of the display. Click the little blue “e” to launch the browser. To
enter an Internet address (URL), click the search bar displayed centrally at
the top of the window.
Reset
If the Notebook “freezes” and no longer responds, you can reset it. Please and
hold down then on/off switches off. Wait for about 20 seconds and then turn
the Notebook on normally.
Any files that have not been saved will be lost when the Notebook is reset.
Switching off the Notebook
Standby
Briefly press the on/off switch on the device to activate the standby mode.
Press it again quickly to take the Notebook out of standby mode.
Shutting down
Open the Start menu. Click“Ф” in the bottom area of the Start menu and then
tap “Shut down”. The Notebook shuts down.
Saving energy
Deactivate the WIFI function when it is not in use. Only leave the power
adapter connected to the socket until the Notebook’s battery is fully charged.
In addition, always disconnect the power adapter form the Notebook when you
are not charging the Notebook. Reduce the display brightness under
“System”→“Display” in the settings. Activate standby mode or turn off the
Notebook completely if you are not using the Notebook.
General safety information
WARNING
- Risk of multiple injuries due ton reduced phsysical, sensory or mental capabilities and/or lack of knowledge or practical experience
- Children and vulnerable individuals may only use the device under direct supervision. Risk of electric shock or electrocution from live components
- Do not insert objects into the device’s ventilation slots.
- Do not open the power adapter.
- Do not touch the power adapter if you hands are wet.
- Do not short out the device and/or charger.
- Fire hazard and or risk of burns from damaged or leaking batteries
- Do not use or charge the device if the battery if damaged or leaking.
- Do not use or charge the device if the battery is damaged or leaking.
- Avoid skin contact with the device and/or battery if the battery is leaking. Wear protective gloves if it is not possible to avoid touching the device/battery in such cases.
- Immediately wash your hands thoroughly in the event of skin contact with the battery substrate.
- If the battery substrate comes into contact with your eyes, rinse them out with plenty of water and consult a physician immediately.
Risk of fire or explosion when using non-approved chargers and power
adapters
Only use the included power adapter or on an equivalent power adapter to
charge the battery. If the power adapter is defective, only exchange it for an
equivalent power adapter. Please note the information in the technical
specifications of the power adapter in the online user’s manual or contact
customer service.
Risk of multiple injuries from slipping, tripping or falling
Do not expose the device and/or power adapter to vibrations and/or any form of
impact. Do not drop the device and/or power adapter. Do not use the
device/power adapter if it has been dropped and/or is damaged. Have a
qualified service technician check the device/power adapter before restarting
it. Always ensure that the power cord is installed securely. Do not allow the
power cord to knot or kink.
Notes and practical tips on maintenance and repairs WARNING
Risk of electric shock and electrocution from live components Never open the
casing of the device and/or the power adapter. No parts inside the device
require maintenance or cleaning. The battery in the device should not be
removed by the user. Do not disassemble the battery, place objects into it or
handle liquids near it. The battery could catch fire or explode. It is
prohibited to repair or modify the device and/or power adapter. Failure to
comply with these instructions may void the warranty. The device should only
be serviced and repaired by a qualified service technician. Contact customer
service where repairs or servicing are required.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>