Shenzhen Dehuashichuang Technology TWS-L36 TWS Bluetooth Earbuds Instruction Manual
- June 6, 2024
- Shenzhen Dehuashichuang Technology
Table of Contents
TWS Bluetooth Earbuds TWS-L36
Instruction manual
Power on/off
Auto power on: open the charging compartment, the headset automatically
starts up, and automatically paired.
Manual power on: In the shutdown state, press and hold the touch key for
more than 3 seconds to start the machine.
Auto power off: put the earphone into the charging compartment, and close
the cover of the charging compartment, the earphone will automatically shut
down.
Manual power off: Power on, press and hold the touch key for more than 5
seconds to power off.
Bluetooth pairing
- Phone: Open the charging car cover and take out the headset. Turn on the Bluetooth search function and click tws-L36 to connect.
- Android phone: Open the cover of the charging room, take out the headset, then enter the Bluetooth interface of the phone to search for the device, and select tws-L36 for pairing connection.
Tip: If you connect the same phone again, open the cover of the charging case and take out the headset, it will be automatically reconnected.
Operation Music
Play / Pause: When playing music, touch the headset once to pause, then
again touch the headset once to play again.
The previous song: Touch your left ear twice. Next song: Touch your right
ear twice.
Volume reduction: Three touches of the L headset Increase volume: Three
strokes touch the R headset
Call
Answer: When a call comes in, touch the left or right ear once to answer
the call.
Hang up: During a call, touch the left or right ear to hang up the phone
once.
Reject: When you call, long touch the left or right ear to reject the
call.
Voice assistant
Once connected to the phone, tap three times to activate the voice assistant.
Earbuds charging
Put the earphone into the charging box and close the lid, the earphone will automatically enter the charging state.
Charging case
Use the type-c data cable to charge the charging box, and the orange light
will be on when charging. the light is off; charge the headset to turn on the
green light, and the full light turns off.
Specifications
Model: L36
BT5.1
Music play time: about 3 hours (medium volume)
Talk time: about 3 hours
Charge the earphones: 3 times
Distance: 10m
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction
FCC ID: 2A4UJTWS-L36
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>