ADURO S530 U-Light Lamp Organizer and Wireless Speaker User Guide
- June 6, 2024
- ADURO
Table of Contents
ADURO S530 U-Light Lamp Organizer and Wireless Speaker
In the box
- Bluetooth Speaker LED Table Lamp
- Micro USB cable
- Instruction Manual
Features
- Enjoy music wirelessly with great sound quality.
- Multifunctional organizer
- Table lamp with LED light
- Phone holder
INSTRUCTIONS FOR USE Charging Instructions:
- The speaker comes with a built-in rechargeable battery.
- Before using it for the first time we recommend you charge the battery fully. The device can also be used whilst powered & is charging.
- Connect the USB charger cable to a computer USB port or a USB wall charger (not included). Connect the other side to the USB charging slot of the Speaker, the battery charging LED indicator will illuminate red.
- When the battery is fully charged, the LED indicator will switch off.
- When the battery is running low, you will hear a tone to indicate the battery needs charging.
SPEAKER SPECIFICATIONS Bluetooth version JL 5.0;
- Speaker power: 3W;
- Battery: 1200mAh;
- Speaker: 52mm,
- Operating distance:10 meters(max.)
Pairing the speaker
Switch to power on/off button to on, you’ll hear a tone and the Bluetooth mode will turn on automatically, the blue LED indicator will light, select the pairing name “U-Light Groove” from the list of available Bluetooth devices (phone/music device), you will hear a tone indicating pairing successful.
Listening to Music
Once the speakers are paired with your device you can stream music
wirelessly through the speaker. Select the track you wish to listen to and it
will be streamed to your Bluetooth speaker. Should you encounter any problems
while streaming please refer to your device’s user manual for further
information.
Using AUX-in
After the speaker is turned on, connect one end of the 3.5mm AUX cable into
AUX in jack, the other end of the Cable to connect MP3 / Smartphone to play
music. When inserted the 3.5mm AUX cable to the AUX in jack, the Bluetooth
will be disconnected automatically. (AUX cable not included)
Using the LED Function
Bluetooth Speaker LED Table Lamp can be used independently of the speaker
and be used as a regular table lamp.
Note: Touch the power button to power ON/OFF. Short touch to change
between 3 brightness levels.
Please Note: Not all mobile phones support all the functions listed
above. Please refer to your cell phone’s user’s manual for further
information.
Cleaning & Maintenance
Unplug the product from the supply if it is left unattended and before cleaning. NEVER immerse the product into water and use a dry cloth for cleaning
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.