jogo JS100 Soccer Cleat Sensor User Manual
- June 6, 2024
- jogo
Table of Contents
jogo JS100 Soccer Cleat Sensor
Product Information
JOGO Sensors track 200 data points 1000 times a second for a complete overview of a player’s performance. The insole sensors are frictionless and fit perfectly into each football boot. Together with data analytics JOGO creates reports and dashboards for players and coaches to analyze performance.
Data points
The JOGO sensors currently measure the following data points:
- Total distance
- Time on the ball
- Ball touches
- Average speed
- Ball received
- Total sprints
- Dribbling distance
- Deceleration
- Running distance
- Sprint speed
- Passes
- Leg distribution
- Mechanical work
- Shot power
- Acceleration
- Walking distance
- Work rate
Product Accessories
- 2x Jogo Sensors
- USB Magnetic charger
- 2x Jogo Sensor Insoles
- User Manual
Operation
Installation & Power-on
Then Jogo Sensors can be inserted into the Jogo Insoles in the designated slot
on the back of the insoles.
NOTE: Please note to insert the Jogo Sensor so that the QR Code is still
visible.
Please charge the sensors when using them for the first time. This will also turn-on the sensors.
Charging
Plug in the USB charging cable, open the cover in the insole and connect the
magnetic charger to the device.
NOTE: The charger will snap and connect only in one way, don’t force the
magnetic charger on the Jogo sensor.
- Charging: Blue LED flashes
- Full battery: Green LED flashes
Jogo App & Pairing
To connect and pair the Jogo Sensors with your phone please download the Jogo
App for iOS or Android and follow the steps in the Jogo App.
Download the Jogo App by scanning this QR code
| Specification | Min | Type | Max |
|---|
Electronic specification
External Voltage Input (spring contacts)| 4.05V| 5.00V| 6.05V
External Current Input (spring contacts)| –| –| 80 mA
Battery voltage| | 3.7V| 4.2V
Battery capacity| 80 mAh| 85 mAh|
Battery type| Lithium Polymer
Technology
Wireless technology| Bluetooth 5, 2.4 GHz
Motion Sensor| 6D, ±32G, ±4000dps
Flash memory| 128 Mbit, NOR Flash
LED| RGB LED
Mechanical
Enclosure| IP65, ABS
Dimensions| 42 x 23 x 5 mm
Weight| 4.0 g
Environmental
Operating temperature| 0℃ ~ 45℃ (Charge)
-10℃ ~ 65℃ (Discharge)
Storage temperature| -10℃ ~ 35℃
Disclaimer
- The information contained in this manual is just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without making an announcement in advance.
- We shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product.
EU-Declaration Of Conformity
Hereby, We declare that the Jogo Sensor JS100 is in compliance with provisions
of Directive RED 2014/53/EU. A copy of the signed and dated Declaration of
Conformity is available.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure statement. The device can be used in portable exposure condition without restriction
FCC ID: 2A299-JS100
WARNING: Changes or modifications to this unit not expressly approved by
the part responsible for compliance could void the user’s authority to operate
the equipment