ATLANTIS UVBOXPRO Mobile Phone Wireless Charging Sterilizing Box User Guide
- June 6, 2024
- ATLANTIS
Table of Contents
ATLANTIS UVBOXPRO Mobile Phone Wireless Charging Sterilizing Box User Guide
Specification
Product name: UV BOX PRO
Product model: DCLBOX
Wireless charging output: 10W (Max) Input 5V/2A；9V/2A
Product size: 21012062 mm
Rated frequency: 110-205 KHz
Transmission distance: ≤6MM
UV output 3W (Max)
UV Light: 4 UV-C LED
270-280nm + 2 regular LED
Material: ABS + PC
Wireless conversion rate: 78%
About the UV sterilization
Before using the device, charge the battery by connecting the USB cable
included. The UV light is very effective in inactivating germs through a
physical process. When bacteria, viruses or other germs are exposed to the UV
light they become unable to reproduce and to infect human beings. Please check
the list of UV light sterilisable germs in our website:
www.ksixmobile.com
Power on
Insert the supplied USB cable and connect to the power supply. After the product is powered on, the default wireless charging mode is on. The indicator will light in blue. If the blue light is not activated, please check the cable and power supply are correctly connected.
Wireless Charging
Put your mobile phone with wireless charge technology in the middle of the open cover. The LED indicator will light in blue color. Wireless charging can be operated at the same time as Sterilization function. The LED indicator will then light in both blue and green.
Sterilizing function
-
Put the mobile phone or other articles to be sterilized into the box and close the lid
-
To start the 5-minute degerming mode:
– Press the bottom button once.
– The built-in buzzer will beep.
– The LED indicator will light in green color
– The ultra-violet light will switch on inside the box -
The entire sterilization process lasts for 5 minutes. When the process is finished, the buzzer will beep three times in a row. The sterilization process will end automatically end.
-
You can the top cover and take out the sterilized items for normal use.
-
If you need to stop the operation during the sterilization process, please press the button for 3 seconds. After the beep, the green light switches off and the operation is stopped. Now you can open the lid and take out the contents of the box.
-
In order to prevent harmful effects on human body and body Eyes, opening the cover automatically turns off the ultraviolet function.
Note: If the product has not been used for a long time, the UV lamp may require a pre-heating process. The process will take 10 seconds and once preheating completed, the ultraviolet lamp lights up automatically.
Aroma function
Before starting the sterilization, use the supplied straw to apply 2 or 3 drops of perfume into the aromatherapy hole. Proceed to the sterilization process as described in this manual. Once the process is finished the goods inside the box will be sterilized and aromatized.
Security
– A maximum of two to three drops of perfume can produce a full aromatherapy
effect. Do not drop too much Perfume.
– Do not use perfume with alcohol to avoid damaging the silicone material of
the product.
– If the top cover is opened in the process of degerming, the degerming
operation is temporarily suspended. The UV light will be automatically
extinguished to ensure it does not cause unnecessary damage to the body
outside the box
– Never watch or allow your skin to be exposed directly to the UV Light
Matters needing attention:
Do not disassemble the product by yourself Do not use this product in high temperature or humid environment, keep away from fire and water.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>