atlantis BLUEX08 Executive Wireless Headset User Manual

Atlantis BLUEX08 Executive Wireless Headset

Box contents

• Executive wireless headset
• Micro USB charging cable

Technical information

• Bluetooth version: 5.1
• Bluetooth profiles: HFP, HSP, A2DP, AVRCP Talk time: 15 hours
• Standby time: 320 hours
• Transmission distance: 10M
• Charging voltage: DC 5V
• Battery capacity: 110 mAh
• Max Power Output: 5mW
• Charging time: about 2 hours Impedance: 16Ω
• Sensitivity: 42dB±3dB
• Earbud size: 57.5 x 15.25 x 10.85 mm Weight: 9g

Illustration

User guide

Key functions

1. Power on: Long press the multifunction key for 3 seconds, red and blue lights will alternately flash
2. Power off: Long press the multifunction key for 3 seconds, red and blue lights will flash 3 times until powering off
3. Pairing: Long press the multifunction key for 3 seconds, red and blue lights will alternately flash to enter the pairing status
4. Answer/ hang-up: Click the multi-function key to answer the call or hang up the call
5. Reject call: Long press the multi-function key
6. Play / pause (music mode): Click the multi-function key
7. Redial: Double-click the multi-function key
8. Next song: Long press “+” for 3 seconds
9. Previous song: Long press “-” for 3 seconds
10. Volume up: Click “+”
11. Volume down: Click “-“
12. Low battery reminder: Every 20 seconds, the red light will flash once Charging: Red light on
13. Full battery: Red light turns off

Pairing

• Pairing: Long press the multifunction key for 3 seconds, red and blue lights will alternately flash to enter the pairing state
• Turn on your phone’s Bluetooth function and search “BLUEX08” on the devices list, then click it and will automatically connect. In the standby process, double-click the multi-function key to redial the last number you called. Next time you power on your headset; it will automatically pair with the last mobile phone with which the headset was paired. Blue and red lights will automatically flash.

Disconnect the headset from the phone
To disconnect the headset from the phone (for example, to connect your phone to another Bluetooth device), choose one of the following instructions:

• Turn off the headset.
• Use the phone’s Bluetooth function to disconnect the headset from the phone.
• Move the headset 10M away from the phone.

Connect two phones
First of all, disconnect the headset from the paired phone, without forgetting the connection or removing the pairing. Then, the headset will automatically go back to pairing status. After that, search “BLUEX08” with another phone. Once paired with the second phone, connect the headset again to the first phone. Connect or disconnect each phone to the headset depending on which one you will need to use.

Headset charging

Before using the headset for the first time, we recommend to fully charging it. When charging, the indicator light is red, the battery will be full when the red light goes off.

Note: Please use the original charger. The charging voltage cannot be higher than 5V!

Note: In case the device is not making any sound, make sure the headset is activated and fully charged, paired with your phone, your Bluetooth connection is enabled and that you are within 10m from the phone. If having checked all of this, it still does not work, try the following:

1. Re-charge the headset
2. Restart the phone
3.  Start the phone Bluetooth and delete the previous pairing history
4.  Re-match the headset with the phone

Maintenance recommendations

• Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
• If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.

Safety information

Please read the following instructions before using the device for the first time:

• When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
•  If the product is wet or damaged do not us it.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot weather)
• Do not throw the product into fire.
• Keep the product away from children.
• Disconnect or switch off the product if you are not going to use for a long period of time.
• Do not use the device if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.
• Do not dismount or modify the product. These actions will invalidate the Warranty.

Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC.
The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product.
For electronic devices with Bluetooth: Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth-enabled devices.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.

1. This product is designated for a separate collection at an appropriate collection point. Do not dispose of as household waste.
2.  The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
3. If the equipment uses batteries, they must be removed from the equipment and disposed of in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
4. Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
5. For more information, contact the retailer or the local authorities in charge of waste management.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>