connect IT CEP-1000 Series Bluetooth Earphones User Manual

June 6, 2024
CONNECT IT

connect IT CEP-1000 Series Bluetooth Earphones User Manual
connect IT CEP-1000 Series Bluetooth Earphones

THANK YOU FOR BUYING A CONNECT IT PRODUCT.

Do you want to be the first to know about other news of CONNECT IT? Follow us on social media.

  • Before putting this product into operation please read through the User’s Manual carefully, even if you are already familiar with the use of similar products. Use the product only as described in this User’s Manual.
  • Keep this User’s Manual for future reference. It is an integral part of the product and may contain important instructions for commissioning this product, its operation and cleaning.
  • Make sure that all other people handling this product are familiar with this Manual. If you hand the product over to other people, make sure that they read this User’s Manual, which shall be given to them together with the product.

We recommend keeping the original packaging of the product, proof of purchase and the warranty card, if supplied, at least for the warranty period. In case of transport, we recommend packing the product in the original packaging, in which it has been delivered in, as it protects it best against damage during transport.

Scan this QR code to get the latest version of the User’s Manual. In your smartphone, open the QR code reader application and point the smartphone at this code – the page for downloading the latest version of the User’s Manual will open:
QR code

You can also find the latest version of the User‘s Manual on our website
The text and technical specifications are subject to change.

Important safety instructions

The use of the product limits your awareness of surrounding sounds. Therefore do not drive vehicles or operate any machines when using the product. Clean the product using a soft damp cloth that does not give up any fluff. Do not use any aggressive agents for cleaning.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Technical Specifications

  • Bluetooth version: V5.0
  • Bluetooth profiles:
  • A2DP (Advanced Audio Distribution Profile) … stereo music transmission
  • AVRCP (Audio/Video Remote Control Profile) … music playback control
  • HSP (Headset Profile) … phone calls transmission
  • HFP (Hands-Free Profile) … phone calls control
  • Working frequency: 2.4 – 2.485 GHz
  • Range: up to 10 m
  • Frequency range: 20 Hz to 20 kHz
  • Impedance: 32 Ohm ±15%
  • Earphone sensitivity: 100 +- 5dB
  • Microphone sensitivity: -40 ±2 dB
  • Battery – earphones: 3,7V / 30 MAh (Li-Ion)
  • Battery – charging case: 3.7 V / 300 MAh (Li-Ion)
  • Operating time: up to 3 hours when using the earphones on their own (without the charging case)
  • Number of earphone charges from the fully charged case: 2×
  • Input parameters of the charging case: 5 V / 0.5–1 A
  • Output parameters of the charging case: 5 V / 100 mA
  • Earphone charging time: approx.2 hours
  • Case charging time: approx. 2.5 hours
  • Earphone dimensions (w × d × h): 17 x 40 x 16 mm
  • Earphones weight: 2 × 4 g
  • Charging case dimensions (w × d × h): 65 x 43 x21 mm
  • Weight of the charging case without the earphones: 32 g
  • Weight of the charging case with the earphones: 40 g

Packaging Contents

  • Bluetooth earphones (1 pair)
  • Charging case
  • MicroUSB charging cable
  • User’s Manual

Description of Each Part

  1. Magnetic protective lid of the charging case
  2. Charging magnetic dock for an earphone
  3. Charging pins
  4. Battery status indicator
  5. Charging case
  6. Earphone
  7. Charging contact pads
  8. Microphone
  9. LED indicator
  10. Multifunction touch sensor
  11. Micro USB charging port
    Description of Each Part

Charging the Charging Case Battery

The battery of the charging case is charged by means of the supplied Micro USB cable and a USB power adapter with an output of 5 V / max. 1 A (the power adapter is not included, but you can use, for example, a mobile phone adapter or the separately sold original CONNECT IT adapter of the CONNECT IT adapter of the CWC-2015 series).

The charging case battery charging status can also be monitored with LED indicator A 4 .
The charging status is displayed with four LED diods (4 diods means that the case is fully charged).

Smart detection function for switch-off

The charging case is equipped with a smart detection function that determines when both earphones are fully charged. The internal circuit turns off after approx. 30 seconds to reduce the discharge of the charging case‘s internal battery.

Note:
The case can be charged with or without the earphones inside.

Operation and Charging of the Earphones

To charge the earphones, put them into the slots of the charging case; the slots are equipped with magnets to fix the earphones easily.

Automatic detection of the charging function:

As soon as an earphone is inserted in the charging case, the case detects it and starts charging it automatically

Caution:
The left earphone must be inserted in the left part and the right earphone in the right part of the charging case. Otherwise the fixing magnets are not correctly polarized and the earphones cannot be inserted properly.

Pairing with a phone

  1. Open the charging case and take out both earphones. The earphones are switched on automatically and the pairing starts, which is indicated by the flashing of the LED indicator  A 9 alternately in blue and red.
  2. Under the Bluetooth section in your mobile, find the pairing name „CONNECT IT CEP-1000-BK CEP-1000-WH“ and have the devices paired.

Earphones power-on (var. Al| Take out the earphones from the charging case. When taken out the earphones turn on automatically.
---|---
Earphones power-on (var. 13)| Touch the multifunction touch sensor A 10 on one of the earphones for approximately 3 seconds. The LED indicator A 9 starts flashing in blue and red.
Earphones power-off (var. A)| The earphones turn off automatically when the connection with the mobile device has been lost for 3 minutes.
Earphones power-off (var. B)| Place both earphones into the charging case.
Earphones power-off (var. C)| Touch the multifunction touch sensor A 10 on one of the earphones for approximately 3 seconds. The LED indicator A 9 starts shining in red.
Music play and pause| To start playing music, touch the multifunction touch sensor A 10 briefly.
To pause the music playback, touch the multifunction touch sensor A 10 briefly.
Volume up| Quickly tap twice on the multifunction touch sensor A 10 of the right earphone
Volume down| Quickly tap twice on the multifunction touch sensor A 10 of the left earphone.
Skip to the next track| Touch the multifunction touch sensor of the right earphone A 10 for approximately 2 seconds.
Skip to the previous track| Touch the multifunction touch sensor of the left earphone A 10   for approximately 2 seconds.
Answering a phone call| Touch the multifunction touch sensor A 10 briefly.
Rejecting a phone call| Touch the multifunction touch sensor A 10 for approximately 1.5 seconds.
Ending a phone call| Touch the multifunction touch sensor A 10 briefly.
Activating the Sin and Google voice assistants| Quickly tap three times on the multifunction touch sensor A 10 of the right earphone.

Note:
The support for the functions in this manual depends on the paired phone.

7 Notices

The use of the product limits your awareness of surrounding sounds. Therefore do not drive vehicles or operate any machines when using the product. Clean the product using a soft damp cloth that does not give up any fluff. Do not use any aggressive agents for cleaning

To prevent possible hearing damage, do not listen at high volume levels for long periods

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS

Packaging materials and old appliances shall preferably be recycled. The packaging materials of this product can be disposed of as sorted waste. The same applies to the plastic bags made of polyethylene (PE) and other materials – please hand them over for recycling.

DISPOSAL OF WASTE ELECTRICAL & ELECTRONIC EQUIPMENT

In accordance with the European Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), this appliance is labeled with this symbol on the product or its packaging to indicate that this product shall not be treated as household waste. It must be disposed of at a collection site for recycling of waste electrical and electronic equipment. The proper disposal of this product helps to prevent adverse impacts on the environment and human health, which could otherwise result from improper waste disposal. The disposal shall be carried out in accordance with waste management regulations. For more detailed information about the recycling of this product, contact the local authorities, household waste disposal services or the shop where you have bought the product. For proper disposal, renewal and recycling, hand the products over to the designated collection sites. Alternatively, in some EU or other European countries, you can return the products to your local dealer when buying an equivalent new product. The proper disposal of this product helps to preserve valuable natural resources and prevent potential adverse impacts on the environment and human health, which could result from improper waste disposal. For details, contact your local authorities or the nearest collection facility. In case of improper disposal of this type of waste, fines may be imposed in accordance with national legislation.

For business entities in the EU countries

If you want to dispose of electrical and/or electronic equipment, please contact your dealer or supplier for the necessary
information.

Disposal in other countries outside the European Union

This symbol is valid in the European Union. If you want to dispose of this product, contact your local authorities or your dealer for the necessary information about the proper way of disposal.
In accordance with the law, we provide the take-back, processing and free environmentally friendly disposal of electrical and electronic equipment through the collective system of REMA Systém, as. The main purpose is to protect the environment by ensuring the efficient recycling of waste electrical and electronic equipment.

For the current list of collection sites, see the web www.rema.cloud

This product meets all the basic requirements of the applicable EU directives. It is CE marked. This mark indicates the conformity of the product‘s technical characteristics with the applicable technical regulations. The EU Declaration of Conformity is available at www.connectit-europe.com.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals