WISILICA Senor E Bi-Directional Communication Device Instruction Manual
- June 6, 2024
- WISILICA
Table of Contents
WISILICA Senor E Bi-Directional Communication Device
Senor E
Senor E is a bi-directional communication device that can be positioned at various locations throughout the BLE Mesh network to extend the coverage. This USB powered wireless BLES.2 based device also supports beacons and comes with different antenna options for better communication.
Features
- Increases the WiSilica BLE Mesh network range
- Act as a Mesh device to relay messages between far devices
- Support iBeacon, Eddystone beacon, Eddystone beacon URL, Alt beacon, and Custom beacon
- Antenna options for better wireless communication
- Unit powered by a USB type A adapter
- Zero downtime Over-the-Air (OTA) firmware updates
Specifications
Device Dimensions
Antenna
Stick antenna
600mm wire antenna
130mm wire antenna
Device as a BLE beacon transmitter
Installation
- Find the position to place the repeater between the WiSilica Bluetooth devices
- Put the hole on the wall or surface where this repeater needs to be installed
- Screw the repeater on the wall/surface via the mounting flanges on the device
- Connect the USB port to the *power adapter
- Plug in the adapter and power-on the repeater device
Sold as separate accessory along with the product
Certifications
Warning
- To prevent the device from any defect, please handle and store it with care.
- Do not store in very humid location or at extreme temperature.
- Do not open or disassemble the product. Senor E
- Do not expose t his apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
Ordering Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
CONNECT ING TH INGS TO LI FE WiSilica Inc
23282 Mill Creek Dr #340, Laguna Hi lls, CA 92653. United St ates of America. info@wisiIica.com www.wisiIica.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>