cellularline BTPOWERMINIW Power Mini Headset In-Ear Bluetooth Headset with Charging Case User Manual

cellularline BTPOWERMINIW Power Mini Headset In-Ear Bluetooth Headset with Charging Case

Description

1. MF (multifunction) button
2. LED
3. USB port
4. MicroUSB charging port
5. Led Charging Case
6. USB-MicroUSB charge cable
   
   

PRELIMINARY OPERATIONS

Charging Case Charge: Charging Case has an internal battery which allows the device to be recharged without being plugged in to a mains charger. The Charging Case must therefore be charged before recharging the device batteries.
Connect the charge cable (6) to a USB port and connect the other end to the MicroUSB charging port (4); the red LED (5) will flash while charging and will become steady when recharging is complete.
Charging a phone with Charging Case: it is possible to charge a phone using Charging Case. Connect the cable supplied (6) or the cable supplied with the phone to the USB port (3). Use the phone display to keep track of the battery charge level.
Headset charging: insert the device in the Charging Case dock, charging will start automatically. The red LED (2) turns on when charging is in progress. The LED (2) turns off when charging is complete.
Pairing with your phone: Switch off Bluetooth® on the phone and remove the device from the charging case and wait for the LED (2) to start flashing quickly.
Turn on Bluetooth® on your phone to run a search for devices and select POWER MINI when it is detected.
Switching on: remove the device from the charging case or alternatively keep the MFB button (1) held down until the LED (2) flashes white (takes about 2 seconds)
Switching off: insert the device in the charging case or alternatively keep the MFB button (1) held down until the LED (2) flashes red (takes about 2 seconds).

Important: if the earbuds or mobile phone have been turned off or placed out of range, in order to pair them again, it may be necessary to access the mobile phone menu or simply press the MFB button (1) as if you were answering a call.

USING THE DEVICE

Answering a call: if you are wearing the earbuds, briefly press the MFB button (1) or remove the device from the charging case, wait for the phone to connect and automatic answering (takes about 2 seconds).
Ending a call: briefly press the MFB button (1) or return the earbuds to the charging case.
Play/Pause: press the MF button (1)
FF: press the MFB button (1) twice
Rew: press the MFI button (1) three times
Volume adjustment: use the phone controls to adjust the volume.
Flat battery indicator: the LED (5) flashes white when the battery is flat.

HEADSET TECHNICAL SPECIFICATIONS

-Cellularline S.p.A. declares that this bluetooth headset with charging case complies with Directive 2014/53/EU.
The full text of the EU Declaration of conformity is available at the following Internet address: www.cellularline.com/_/declaration-of-conformity. Cellularline S.p.A. also declares that this bluetooth headset with charging case complies with Directive 2011/65/EU updated from 2015/863/EU.

– INFORMATION ON THE STATUTORY WARRANTY
Our products are covered by a statutory warranty against conformity defects in accordance with applicable national consumer protection laws. For more information, please see the following page www.cellularline.com/_/warranty

– INSTRUCTIONS FOR THE DISPOSAL OF DEVICES FOR DOMESTIC USE (Applicable in countries in the European Union and those with separate waste collection systems) This mark on the product or documentation indicates that this product must not be disposed of with other household waste at the end of its life. To avoid any damage to health or the environment due to improper disposal of waste, the user must separate this product from other types of waste and recycle it in a responsible manner to promote the sustainable re-use of the material resources. Domestic users should contact the dealer where they purchased the product or the local government office for all information regarding separate waste collection and recycling for this type of product. Corporate users should contact the supplier and verify the terms and conditions in the purchase contract. This product must not be disposed of along with other commercial waste. This product has a battery than cannot be replaced by the user. Do not attempt to open the device to remove the battery as this could cause malfunctions and seriously damage the product. When disposing of the product, please contact the local waste disposal authority to remove the battery. The battery inside the device was designed to be able to be used during the entire life cycle of the product. For more information, visit the website http://www.cellularline.com

– Using the device may, in some cases, interfere with the correct functioning of medical devices (e.g. pacemakers).
Prolonged exposure to high volume and prolonged use may cause permanent damage to hearing.
Do not use the device in places where being unable to hear external noises could prove dangerous (e.g. railway crossings, train platforms)
If used when driving, comply with the regulations in force in the relevant country. Children should be supervised when using the device and all accessories and packaging should be kept out of their reach.
Do not expose the device for prolonged periods to damp, dust, soot, steam, direct sunlight, and excessively high or low temperatures, which could result in it malfunctioning Use only suitable chargers for charging Regularly charge the product (at least once every 3 months).

Via Lambrakis 1/A
42122 Reggio Emilia, Italy
www.cellularline.com

Documents / Resources

| cellularline BTPOWERMINIW Power Mini Headset In-Ear Bluetooth Headset with Charging Case [pdf] User Manual
BTPOWERMINIW, Power Mini Headset In-Ear Bluetooth Headset with Charging Case
---|---

References

• Cellularline Site WW | Homepage
• Cellularline Site WW | Homepage
• Declaration of conformity | Cellularline Site WW
• CellularLine Site IT | Homepage

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>