EKLEVOR EKV006 Karaoke Microphones Wireless 2PCS User Manual

**EKLEVOR EKV006 Karaoke Microphones Wireless 2PCS User Manual

**

Package Contents

1. Receiver

2. Wireless Microphones

3. 6.35mm to 3.5mm adapter

4. Charging Cable

5. “AA” size battery

6. Rechargeable battery

7. Microphone Sponge

8. Microphone Anti-Rolling Ring

9. User Manual

Welcome to EKLEVOR

Thank you for showing your confidence in us by purchasing the EKV006. This manual contains important instructions for setting up and operating your equipment. Please take a few minutes to read the instructions below carefully before operating the equipment. Please keep the manual for future reference. Please fully charge the battery when using this product for the first time.

• Outdoor Speaker

• Power Amplifier

• Mixer

Receiver can Only Plug in MIC jack, No Plug in Aux jack, otherwise no sound can be heard.

1/4 (6.35mm) Mic in

1/8″ (3.5mm) Mic In

PA Speaker

Soundbar

Not for Phone/Tablet/PC/ Bluetooth Speaker

Handheld Microphone

1. Microphone head: including net head and audio head module
2. Display screen: show working channel, frequency and battery status
3. Power switch: long press to turn on or off
4. Lock: long press the button for 2s to lock, and long press 2s again to unlock; can prevent misuse during operation
5. CH+: short press this button to increase the channel, long press to switch between A and B channel
6. CH-: short press this button to decrease the channel
7. B.S: short press this button to select the sound effect mode, there are 6 modes in total: EF0-original mode, EF1-male mode, EF2-female mode, EF3-conference mode, EF4-Karaoke mode, EF5-echo mode; long press the button for ID matching function, display: NOID; long press again and display ID-, cycle.
8. VOL+: short press to increase the volume
9. VOL-: short press to decrease the volume
10. Battery box: unscrew bottom tube and put in AA battery

Receiver

1. DAntenna: receiving the signal from the transmitter
2. Battery cover: built in 18650 replaceable lithium battery, open the battery cover and replace it directly
3. Charging port: connected with charging cable (DC5V), please turn the power off when charging
4. Power switch: push ON to open, push OFF to close
5. Audio output: connect to the Mic interface of post amplifier
6. B channel indicator: light up means it got the signal
7. Power indicator: the light shows blue when turn on, it shows red when charging; the light would turn down when the charging is full
8. A channel indicator: light up means it got the signal

Operation Guide

1.How to adjust the volume?

Single Press: press VOL+ or VOL- to increase or decrease the volume

Minimum volume is 1

Maximum volume is 9

2.How to match the frequency?

Long press the B.S” button to enter the FM channel after powering on (please operate the microphone at a distance of about 1 meter from the receiver) Microphone A and Microphone B must be matched the channel separately.

Startup Screen
Step 1: long press the “B.S” button and the screen will flash “ID
Step 2: after flashing, the screen displays the frequency and the matching is successful.

(Note: if the connection is not successful, please repeat the above steps again.)

3.How to switch between Microphone A and Microphone B ?

Each of our microphone has both A and B two frequency points, that is, it can be used as microphone A or microphone B by switching. Long press the “CH+

Long press CH+ Button the microphone switches from “CHA” to “CHB’

4.How to cancel the frequency matching?

After the microphone’s frequency s matched and you want to cancel this frequency matching, long press the “B.S” bution again. The screen will flash “NOID” and just wait for ihe flashing to stop. After canceling the matching, the microphone can be connected to any receiver of this model.

Long press the *B.” butto.
The screen starts to flash
The matching mode has been canceled.

5.How to switch the sound effect mode ?

Short press the “B.S

The screen shows EFO as the original sound

‘The screen shows EF 1as the male sound

The screen shows EF2 as the female sound
‘
The screen shows EF3 as the conference sound

The screen shows EF4 as the karaoke sound

‘The screen shows EF5 as the echo sound

6.How to do when the microphone is picked up by other receiver, or my

receiver is matched by other microphone?

In this case, itis generally because the microphone does not lock the ID with its own receiver, and the microphone is in the “NOID

7.How to do when one of the microphone can’t be connected and has no sound?

In this case, it is generally because two microphone are switched to the same channel, that is, both are A or both are B. The microphone which does not sound is not locked ID with its own receiver, so it is in the “NOID

Note

1. The endurance of the microphone is related to the battery performance. Please use the alkaline battery or rechargeable battery with better performance to improve the endurance.

2. This receiver has a 6.5mm plug and a 3.5mm converter plug, which is suitable for various devices.
   Note: It needs to be a device with a MIC interface, if the interface is not suitable, please configure your own adapter, such as TYPE-C/Lightning.

3. In order to achieve the best singing effect, the mouth and the microphone should be kept at an appropriate distance. Too far away will affect the volume and too close will produce airflow impact. To reduce the airflow impact, the best angle between the microphone and the mouth is 45 degrees.

4. If the microphone is not used for a long time, please remove the battery to prevent battery leakage and damage to the microphone components.

5. Do not use microphones with the same frequency at the same time, it will cause no sound or disturbing noise. When using multiple sets of products together, please follow the operation in the “Operation Guide” item 2 above to match the frequency. so as to prevent microphones from competing frequency with each other.

6. If there are any problems during using this mics set, please contact us via our customer service email, we will try our best to provide you the best service.

Common troubleshoot

The microphone cannot be turned on| Please replace two new AA batteries and check the positive and negative directions of the batteries to make sure they are in the correct direction.
---|---
The microphone is automatically turned off| Please replace two new AA batteries.
The receiver cannot be turned on| Please charge the receiver and check the positive and negative direction of the battery. If the problem cannot be resolved, please replace a new 18650 (3.7V) lithium battery.
The receiver cannot be charged|

1. Check the positive and negative direction of the battery to ensure that the direction is correct
2. Replace a charging cable with the same interface for charging
3. Replace with a new 18650 (3.7V) lithium battery.

The receiver and microphone have sufficient power, but the microphone has no sound, or only one microphone has sound|

1. Please check the channels of the two microphones from the microphone display, make sure that the two microphones are on the CHA and CHB channels respectively, the two microphones cannot be set on the same channel. If you need to adjust the channel, please long press the “CH+” to switch between theA and B microphone.
2. Please check the frequency points of the two microphones from the microphone display to ensure that the two microphones are at different frequency points.
3. Please pay attention to whether the receiver is plugged into the correct port, Receiver can only plug in mic jack, No Plug in Aux jack.

Microphone whistling or excess noise|

1. The microphone is too dose to the speaker or the volume is adjusted too high, please turn down the volume of speaker or keep away from speaker.
2. Please check if there is any interference device nearby, such as CD player, computer, digital device, earplug monitoring system, etc. Try to remove the device first. If multiple systems are used, frequency intervals between systems can be increased. Try to switch a channel with no interfering signal.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>