JLB7tech JLB853 4.3-Inch Split Screen Video Baby Monitor Instruction Manual

JLB853 4.3-Inch Split Screen Video Baby Monitor
Instruction Manual

WARNING
STRANGULATION HAZARD -Children have STRANGLED in cords.
Keep this cord out of reach of children (more than 3 feet/1 meter away from the crib). Never use extension cords with AC adapters. Only use the AC Adapters provided.

WARNING
Adult assembly required. Keep small parts away from children when assembling.

Warning Information

• Keep this instruction manual for future reference.
• For adult use only.

Setup and use your digital video baby monitor

Installing Baby Unit
A. Place Baby Unit on a flat surface, such as a desk or shelf, or mount the camera on a wall.

B. Connect the small plug of the power adapter to the Baby Unit and the other end to a suitable electrical outlet. Only use the enclosed adapter (5V DC  1000mA).
The baby unit is turned on and the power LED will be green.

C. Connecting the power supply for the Parent Unit.
Connect the small plug of the power adapter to the parent unit and the other end to an electrical outlet. Only use the enclosed adapter (5V DC/1000mA).
Recommend charging time of at least 3 hours before first use.

Precaution: use of battery for Parent Unit Only charge the battery when the battery life indicator is low. Constant recharging of your battery before the low battery indicator light comes on will decrease the life of your batteries.

When the battery is low, the power on the off LED (icon) will flash red, and the on-screen display battery icon will flash red indicating that the battery needs to be charged.

Notice:
If you use the parent unit for the first time when you turn on the parent unit, some boot menus will pop up on the screen, we try to explain the status and function on these menus, please according to the tips to switch to the monitor system interface. When you are familiar with this monitor, you could switch off these on-screen tips on the menu. 

function of keys and LED indicators

Parent Unit

| Talk| In single screen mode, press and hold to talk to the baby unit.
---|---|---
| Power Saving-on/off| Press to switch on/off Power Saving (When the power-saving mode
is enabled, the screen will be turned off)
| Select| Menu mode (Press to select menu option)
| Up/Down
Camera Up/Down| Menu mode (Press to adjust menu settings)
Single screen mode(Press to control the current camera to rotate
up/down)
| Left/Right
Camera Left/Right| Menu mode (Press to adjust menu settings)
Single screen mode(Press to control the current camera to rotate
left/right)

WARNING THIS PRODUCT CAN NOT REPLACE RESPONSIBLE ADULT SUPERVISION

• When an AC Adapter is plugged into an electrical outlet, do not the exposed end.
• Test baby monitor before first use, periodically, and when changing location of the baby unit(Camera).
• Do not use the monitor near water (Such as bathtub, Sink, etc).
• Keep parent unit away from heat sources (Such as stoves, radiators, etc).
• Make sure there is proper ventilation around the baby unit and parent unit.
• This product is not a toy. Do not allow children to play with it.
• The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
• The baby monitor should not be considered a medical device. While using the baby monitor, it is strongly recommended to have an adult directly check on your baby. Premature babies or children considered at risk must be supervised by your pediatrician or other medical staff.

Battery Warning

• Use only the original rechargeable battery provided.
• Do not shoot-circuit supply terminals.
• Remove the battery when the product is stored for long periods of time or when the battery is exhausted.
• Dispose of exhausted battery properly.
• Keep all batteries away from children.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.

Precautions

• Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electrics shock.
• The baby monitor works better in temperature ranging between 0℃ and 40℃(32℉ and 104℉).
• Do not dismantle the appliance. It does not contain any parts that may be used independently.
• Never expose the baby monitor for long period to the sun’s direct rays and never place it next to a source of heat, in a damp or very dusty room.
• Never push objects of any kind into this product through openings they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
• Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
• The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

JLB7Tech’s baby monitor warranty policy

JLB7Tech will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the unit is defective in workmanship or materials. To claim your repair/replacement, the product must be returned to JLB7Tech together with a copy of the purchase receipt. In the absence of the purchase receipt, the warranty will be 12 months from the date of manufacture. This warranty does not apply to normal wear or damage from misuse, abuse, improper handling, installation, accident, unauthorized repair or alteration.
Please contact our Customer service by Facebook JLB7Tech or via email for details.

IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Antenna

Baby Unit

PAIR| Pairing button| When the camera is powered on, press it the power LED starts to blink, the
the camera is in pairing mode, and press it again to exit pairing mode.
---|---|---

Start to use the monitor

Status bar

Lullaby is activated
Temperature alert is activated
Talk function is activated
Zoom in is activated
Scan view is activated
Signal strength reference
Camera number
SCREEN OFF is activated
Monitor is muted
ECO mode on
Baby room temperature
Battery level

Menu operation

Adjust Parent Unit LCD Brightness lighter or darker.
Adjust camera volume: Sound level from 1 to 5.
Adjust Parent Unit volume: Sound mute, or sound level from 1 to 6.
Activate or deactivate lullaby function, 5 lullabies can be chosen. When turning on a lullaby, on the Baby Unit side will always hear the ringtone from the Parent Unit.
Repeat: Repeat all lullabies.
OFF: Deactivate lullaby function
ADD: Add an additional camera. Two cameras can be added.
Step 1: Move the parent unit to the same area as the camera. Both parent and baby units are switched on.
Step 2: Select ADD in Menu. The next available camera will automatically be highlighted.
Press “Select” to begin pairing.
Step 3: Within 10 seconds, press the “Pairing button” of the camera.
Step 4: Once successfully paired, the camera light will stop flashing and video will appear on the monitor screen within 20 seconds.
Delete: Delete paired camera from the list.
View: Select and display the camera.
SCAN: Display paired cameras one by one.

SPLIT SCREEN
Split-screen view: Monitor only play sound from the camera which is marked in the red frame.

• Use ▲▼◀▶arrow key to move red frame between 2 cameras.
• Press the “SPLIT” key to select and switch to that camera view and exit split-screen view.
• On split-screen mode, press the “MENU” button to start audio scan mode. Monitor cycles audio between cameras about every 10 seconds.

Zoom Out In

High: Beep Alarm is issued when the room temperature is higher than this setting.
Low: Beep Alarm is issued when the room temperature is lower than this setting.
C: Display temperature on Celsius scale.
F: Display temperature in Fahrenheit scale.
Temperature calibration: calibrate room temperature display to your standardized one.
ON: Activate room temperature alarm function.
OFF: Deactivate room temperature alarm function.

Power saving mode: To activate the Parent unit from the Power saving mode.
ECO mode: Turn off both video and audio to save more battery energy. When the camera detects sound, the monitor automatically activates. Four detection sound levels can be set.
ECO Loud: Baby cries louder to activate the Parent Unit.
Medium: Baby cry moderate to activate the Parent Unit.
Quiet: Baby cries a little bit to activate the Parent Unit.
Turn off screen and leave audio on: Keep audio continuously on when the screen is off in power saving mode.
Explanation On/Off: We try to explain the status and function of the boot menu. You can turn the explanation on or off based on your usage.
Sound Bar: This soundbar is designed for deaf parents to reflect sound level picked up from the camera. You can turn visual sound level indication on or off.
Reset: Reset to factory default. All paired cameras will be deleted from the paired list.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example -use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.

Industry Canada Statement
This device complies with the Industry Canada licence-exempt RSS standard.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>