SunElements High Quality Greenhouses and Photovoltaics Instruction Manual

SunElements High Quality Greenhouses and Photovoltaics

Product Specifications

• Brand: SunGarden
• Product Type: Indoor Covering
• Assembly: Required
• Recommended Assembly: At least two people

Product Usage Instructions

General Information
Before starting the assembly process, it is crucial to read and save the provided assembly instructions. Pay close attention to any symbols and signal words used in the manual or on the packaging as they provide important information about assembly and handling.

Safety Instructions
Ensure to follow all safety instructions provided to prevent any risks of explosion, suffocation, or injury during the assembly process. Avoid storing highly flammable, combustible, or explosive materials in the product.

Before Assembly
Check the product and its scope of delivery carefully before opening the packaging. Be cautious when opening the packaging to avoid damaging the product. If any damage is observed, refrain from assembling or using the product and contact your dealer or the manufacturer.
Determine the appropriate installation location and prepare a level foundation as per the manufacturer’s suggestions to ensure stability and durability of the product.

Assembly Instructions
Assemble the product with at least two individuals to avoid any accidents. Follow the step-by-step assembly instructions meticulously to prevent any potential mistakes that could lead to injuries. Secure the product well to the foundation using the provided L brackets to prevent storm damage.

Frequently Asked Questions (FAQ)

• Q: Can I assemble the product alone?
  A: It is recommended to assemble the product with at least two people to ensure safety and ease of assembly.

• Q: What should I do if I notice damage while unpacking?
  A: If you observe any damage to the product while unpacking, do not proceed with assembly or usage. Contact your dealer or the manufacturer for further assistance.

• Q: How should I secure the product to the foundation?
  A: Utilize the included L brackets to securely fasten the product to the foundation, following the provided instructions to prevent storm damage.

Hinweise
Instructions

GENERAL

Read and save the assembly instructions:
These assembly instructions apply to the SunGarden® product from SunE-lements GmbH (hereinafter referred to as “product”) and contain essential information for assembly and correct handling.
Please take the time to read the assembly instructions carefully, especially the safety instructions, before you begin assembling and using the product. Failure to follow these instructions could result in serious injury or damage to the product.
The instructions are based on the applicable standards and regulations
of the European Union. When abroad, please also observe the respective country-specific guidelines and laws. We recommend retaining the assembly instructions for future reference. If you pass the product on to third parties, ensure that they receive the assembly instructions.

Intended Use
The product is intended for the cultivation and cultivation of vegetables, flowers and other plants and is not suitable for storing highly combustible or flammable substances.
In the event of a fire in the product, you should immediately alert the fire department and ensure that there are no people inside. The product is intended exclusively for installation in gardens or similar green areas in private areas and is not suitable for commercial use. It is not a children‘s toy. Please note that the structure may be regulated by building regulations. Before installation, find out from your local building authority whether and how you are allowed to set up the product. Violation of these regulations may result in the license being revoked. If you install the product without permission or violate building regulations, you may have to dismantle it. Returns are not possible if you have already started assembly.
Use the product only in accordance with the instructions in these assembly instructions. Any other use is considered improper and can lead to property damage or even personal injury. Read all safety warnings and instructions carefully as failure to follow them could result in serious injury. Neither the manufacturer nor the dealer assumes liability for damage caused by improper or incorrect use.

The greenhouse is not suitable for permanent residence.

Explanation of symbols
The following symbols and signal words are used in these assembly inst- ructions, on the product or on the packaging. This symbol provides you with useful additional information about assembly or handling.

Assembly information
Wait 60 minutes before cutting off the seals.

This symbol provides information and instructions for installation.
This symbol indicates a waiting time of 60 minutes. This must be waited for before the installed seals are cut off.
Do not assemble the product alone. At least with two people.

SAFETY INSTRUCTIONS

Be careful of the risk of explosion!
Intense sunlight poses a risk that the product will heat up considerably. This could result in the explosion of explosive materials, while highly flammable or combustible materials could catch fire if stored in the product.
It is strictly forbidden to store highly flammable, highly combustible or ex- plosive substances in the product.

Caution: danger of suffocation!
There is a risk that small children may put individual assembly parts in their mouths and swallow them or get caught in the packaging film. In both cases there is a risk of suffocation.

To minimize this risk:

• Keep small children away from all assembly parts and the assembly location.
• Make sure that small children do not put small parts in their mouths.
• Forbid children from playing with packaging materials.

Risk of injury!
There is a particular risk of injury during assembly, particularly for children and people with limited physical, sensory or mental abilities. These individu-als may not be able to adequately assess risks.
To avoid injury:

• Keep children and people with limited physical, sensory or mental abilities away from the product during assembly.
• Do not allow the product to be assembled, cleaned, maintained or repaired by children or persons with reduced physical, sensory or mental capabilities.
• Under no circumstances should you step on the roof surface, it could break due to your weight! Danger of falling!

Risk of damage!
Improper handling of the product can lead to damage to the product.

• Close the door, ventilation roof and windows during wind and storms.
• Do not place heavy materials on the roof and wall panels of the product.
• Do not hit the wall panels with hard objects. These can become damaged or even break.
• Do not enter the product if individual parts are cracked, cracked or deformed. Replace damaged components only with suitable original spare parts.
• Remove ice and snow from the product. Your product has a snow load of 150kg/m² – remember that wet snow is very heavy.

The manufacturer is not liable for storm, wind, water and snow load damage (we recommend clearing the roof of snow loads in the winter months). A guarantee for compensation for consequential and financial losses is not provided.

BEFORE ASSEMBLY

Check product and scope of delivery
If you carelessly open the packaging with a sharp knife or other pointed objects, the product can quickly be damaged. Be very careful when opening.

• Check whether the delivery is complete according to the parts list.
• Check whether the individual parts of the product are damaged.

If this is the case, do not assemble or use the product. Contact your dealer or the manufacturer.

Determine the installation location
Improper handling of the product can cause damage.
To avoid damage:

• Choose an easily accessible and wind-protected location for the product.
• Place the foundation and the product only on solid ground.
• Avoid placing the product on the edge of your garden to ensure optimal accessibility from all sides. Remember that you need at least half a meter around the product for assembly.
• Place the product on a suitable foundation and fix it to it.

Prepare foundation
The foundation must be designed as in our foundation suggestions (www.sunelements.at). Remember that a horizontal, level foundation is the basic requirement for assembling the product.

Secure the product well to the foundation using the included L brackets to avoid storm damage.

ASSEMBLY INSTRUCTIONS

Risk of injury!
The assembly should be carried out extremely carefully and step by step. Following these assembly instructions carefully is crucial to avoid potentially life-threatening mistakes.
To minimize injuries:

• Assemble the product extremely carefully and according to the steps in the assembly instructions.
• Assemble the product with at least two adults.
• Wear protective gloves, safety glasses and safety shoes during assembly.
• Secure each other well, especially when assembling the upper parts of the product, especially when standing on a ladder.
• Do not step on the roof of the product as there is a risk of falling or breaking through.

Danger of cutting!
There may be sharp edges on the aluminum profiles. Glass and acrylic glass can have particularly sharp edges, so always wear gloves when installing.

Risk of damage! of cutting!

• Tighten all screw connections tightly.
• Remove any sunscreen or creams from the product immediately. Exposure to sunlight can cause stains that cannot be removed.
• When it comes to multi-wall panels, it should be noted that there is an inside and an outside. The outside has UV protection lettering. To avoid confusion, always remove the film at the end of assembly.
• Mount the product on a soft and clean surface. If necessary, place a blanket or something similar underneath to prevent the surface from being scratched or damaged.

CLEANING AND MAINTENANCE

Cleaning
Improper handling of the product can lead to damage to the product. Do not use any aggressive cleaning agents, brushes or sharp or metallic cleaning objects such as knives, hard spatulas or similar. Remove any soiling with clean water (garden hose) and, if necessary, a mild detergent.

Maintenance
All joints, plastic connections and seals in the house must be checked at least once a year. Also oil the mortise lock and check the cable of the purlin mechanism.

Disposal
Dispose of the packaging by type at a recycling centre.

Functional explanation

Cover clip

Covers

Please note
All possible panelling elements are shown in these instructions. Please refer to the supplementary sheet on page 8 for the parts actually used for your configuration.

Your configuration

Part list

Cover top

Cover bottom

Cover L-shape

Cover U-shape

Cover center

Not every house contains all components.
Please note the additional sheet on page 8!

Installation Cover U-shape

0750

Installation Cover L-shape

0801

Installation Cover Top

Installation Cover bottom

Installation Cover center

SUNELEMENTS GMBH Sportstraße 7
4142 Hofkirchen i. M. Austria
www.sunelements.at
office@sunelements.at
+43 7285 93 08 00

References

• SunElements - Hochwertige Gewächshäuser & Photovoltaik
• SunElements - Hochwertige Gewächshäuser & Photovoltaik

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>