crest SGIAA Indoor Antenna Signal Amplifier Instruction Manual
- June 6, 2024
- CREST
Table of Contents
SGIAA Indoor Antenna Signal Amplifier
Instruction Manual
Amplifies your TV reception across VHF/UHF & FM frequencies, which improves picture and sound quality by boosting weak reception.
Please note:
- Connect as close to the antenna as possible for optimum sound and picture quality.
- Wall fixings are included for the wall mounting option.
- FOR INDOOR USE ONLY
Setting up the amplifier:
- Plug the incoming antenna cable into the amplifier by inserting it into the “ANT” (antenna) port.
- Now connect one end of another antenna cable to your TV and the other end to the amplifier by inserting it into either the “TV1 ” or “TV2” port.
- Connect the power supply to the amplifier.
- Power on the amplifier via the power switch.
Tuning your TV:
- Once installed, retune your TV by following the instructions in your TV manual.
- Adjust the signal gain using the dial on the amplifier to reduce or increase the amplification level required. Retune your TV each time that you adjust the gain dial.
Proudly brought to you by:
PO Box 5658 Brendale
OLD Australia 4500
Customer Support
1800 812 261
www.crest.com.au
AUSTRALIAN OWNED
1697/3
Read User Manual Online (PDF format)
Loading......