H Koenig MGX90 Programmable Coffee Maker Instruction Manual

: June 6, 2024
: H Koenig

Table of Contents

SAFETY INSTRUCTIONS
PRODUCT OVERVIEW
- Button functions instruction
OPERATION
CLEANING AND CARE
HINTS ON DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

mgx90
Instruction Manual

Programmable Coffeemaker

https://www.hkoenig.com/produits/categorie.php?recherche=MGX90

SAFETY INSTRUCTIONS

General safety

Read the manual carefully before use and keep the manual for future reference.
Only use the appliance and the accessories for their intended purposes and do not use the appliance and the accessories for other purposes than described in the manual.
Do not use the appliance if any part or any accessory is damaged or defective. If a part or an accessory is damaged or defective, it must be replaced by the manufacturer or an authorized repair agent.
Children should be supervised to ensure that they do not play with the appliance.
This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge, provided that they are supervised or instructed in the safe use of the appliance and that they fully understand the potential hazards.
Do not use the appliance near bathtubs, showers, basins, or other vessels containing water.
Do not immerse the appliance in water or other liquids.
If the appliance is immersed in water or other liquids, do not remove the appliance with your hands. Immediately remove the mains plug from the wall socket. If the appliance is immersed in water or other liquids, do not use the appliance again.

This appliance is intended for use in domestic and similar applications such as
– kitchen areas in shops, offices, and other working environments
– farmhouses
– in hotels, motels, and other residential environments
– guest rooms.

This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely, and are fully aware of the dangers involved.
Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
Keep the appliance and its power cord out of reach of children under 8 years of age.

– When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock, and/or injury in the event of misuse.
Make sure that the voltage rating on the type plate corresponds to the main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit
Never leave the unit unattended while in operation.
The device must not be used if it has been dropped, obvious signs of damage are visible, or if it has leaks.
Please keep this document at hand and give it to the future owner in case of transfer of your device.

Electrical safety

Before use, always check that the mains voltage is the same as the voltage on the rating plate of the appliance.
The appliance is not intended to be operated by means of an external timer or separate remote-control system.
Connect the appliance to an earthed wall socket. If necessary, use an earthed extension cable of suitable diameter (at least 3 x 1 mm²).
Make sure that water cannot enter the contact plugs of the main cable and the extension cable.
Always fully unwind the mains cable and the extension cable.
Make sure that the main cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.
Keep the mains cable away from heat, oil, and sharp edges.
Do not use the appliance if the mains cable or the mains plug is damaged or defective. If the mains cable or the mains plug is damaged or defective, it must be replaced by the manufacturer, an authorized repair agent, or by a qualified person.
Do not pull the mains cable to disconnect the mains plug from the mains.
Disconnect the mains plug from the mains when the appliance is not in use, before assembly or disassembly, and before cleaning and maintenance.

Safety instructions for coffee makers

Do not use the appliance outdoors.
Do not use the appliance in damp environments.
Only use the appliance in frost-free environments if the appliance is filled with water.
Place the appliance on a stable and flat surface.
Place the appliance on a heat-resistant and splash-proof surface.
Do not place the appliance on a hob.
Do not place the appliance on hot surfaces or near open flames.
Make sure that the appliance does not come into contact with flammable material.
Keep the appliance away from heat sources.
Be careful with hot water and steam to avoid burns.
Store the appliance in a dry place when not in use. Make sure that children do not have access to stored appliances.

Disposal of packaging

WARNING:
Danger of suffocation! Dispose of plastic packaging immediately so that children do not injure themselves.

PRODUCT OVERVIEW

1. Cleaning brush
2. Filter basket
3. Filter basket holder
4. Glass carafe
5. Bean box lid
6. Bean Box| 7. Grinding plant
8. Water tank lid
9. Display
10. Steam outlet
11. Water level indicator
12. Hot plate
---|---

Button functions instruction

| On/Off switch. Turn the appliance on or off.
---|---
| Timer button: Switch-on timer

Press this button briefly to start or end the power-on timer. 2) Press and hold this button for a few seconds to enter the automatic power-up mode. Then press the “H” or “M” button to set the automatic power-on time.
| “H” button: Setting the hours. Press the button repeatedly to set the hours. The number of hours increases each time the button is pressed.
| “M” button: Setting the minutes. Press the button repeatedly to set the minutes. The number of minutes increases each time the button is pressed.
| Number of cups. In standby mode, press to set the number of cups to 2, 4, 6, 8 or 10.
| Setting coffee strength button: In standby mode, press this button to set the coffee strength via selecting icon on display for weak to strong coffee.
| Brewing mode: Press this key to switch directly to brewing mode without activating grinding mode.
| Decalcification: Press to enter decalcification mode. Press again to exit the decalcification mode.

OPERATION

Connect the unit to the power supply. The time display shows PM12:00. The clock symbol flashes without counting the time. The default setting is 2 cups
(weak coffee). Press the ON/OFF switch to start grinding and brewing. The power indicator light flashes and the machine starts working.
Setting the clock
In standby mode, press the “H” and “M” buttons to display the clock setting screen. Use the “H” button to set the hours of the clock (in 12-hour format). Each time you press the button, the value increases by one hour. Press and hold the button to increment the hours continuously.
Use the “M” button to set the minutes of the time (00-59). Each time the button is pressed, the value increases by one minute. Keep the key pressed to increase the minutes continuously.
Auto On
In standby mode, press the TIMER button to access the power-on time settings. The automatic switch-on time flashes in the display (AM 6:00 is the default setting). The clock symbol flashes in the display. Press the H or M keys to set the power-on time. If you do not press anything within 3 seconds, the machine returns to standby mode.
Automatic start time
In standby mode, press the TIMER button to start the automatic start time function. The clock symbol on the display lights up. In this mode, all buttons are unavailable except the TIMER button. The automatic start time flashes and the machine returns to the current time after 3 seconds. If the automatic switch-on time matches the actual time, the machine runs automatically. The operating indicator flashes and the symbol for the automatic switch-on time goes out.
Brewing settings
In standby mode, press the button to select the only brewing function. Press until the brewing symbol appears in the display. To brew, press the ON/OFF switch. The machine starts the brewing without grinding operation. The operating indicator flashes.
Grinding and brewing
When the symbol is lit on the display, the machine is in grinding and brewing mode.
You can set the coffee strength with the button. Press the button to set the number of cups.
Press the ON/OFF button to start the process. The machine first grinds the beans and then brews the powder. When the water has completely drained from the tank, the machine switches to keep warm mode.
Keep warm mode
When the brewing process is complete, the appliance goes into keep warm mode. The operating light is on and the appliance indicates this by humming three times. When the warm-keeping mode ends (after 40minutes max.), the machine goes into standby mode. The unit hums three times and the operating lamp goes out.
Decalcification mode
When the machine needs to be cleared of calcium, the clear calcium icon on the display will illuminate.
Decalcify the machine with a commercially available decalcifier or a water/vinegar mixture. Fill the water tank with the mixture and run the mixture through the machine once. Then fill the water tank with fresh, clean water up to the MAX mark and allow the water to run through as well.
In standby mode, briefly press the CALC button to start the decalcification process. The light on the CALC button flashes and the display shows the symbol . Press the CALC button to stop the decalcification process after a few minutes (or during the process). Decalcification is complete.
Abnormal indication: Buzzer beeps twice and machine will enter the standby mode when the gate above the filter holder is closed or opened abnormally.

CLEANING AND CARE

Clean the unit after each use.
Always unplug the power cord before cleaning.
Never immerse the housing in water or other liquids.
Disconnect the coffee machine from the power supply and allow it to cool completely before cleaning.
Clean the housing surface with a soft, damp cloth.
Do not clean the hot plate with abrasive cleaner or steel wool.
Clean the glass carafe and funnel with water and dry both parts carefully.
Remove thet spray arm and clean it as well.

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/EU this symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council or your household waste disposal service.

Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com – https://en.hkoenig.com – Tél: +33 1 64 67 00 05