H Koenig Citru6 Weasy Electric Citrus Juicer Instruction Manual

H Koenig Citru6 Weasy Electric Citrus Juicer

Safety And Warnings

• Read aU instructions before first use. Retain this user guide for future reference.
•  Do not use this product for applications outside of its intended use.
•  Maintaining correct tire pressure will reduce tire wear and tear and extend their life.
•  Proper tire pressure will improve fuel efficiency and will help maintain correct vehicle handling and safety.
•  Use caution when working around excessive air pressure in car tires.
•  In order to get a strong seal, place the nozzle directly onto the tire valve.
•  Putting the gauge on the nozzle from an angle could result in an inaccurate reading.
• Once the gauge is placed, firmly press the gauge straight down.
•  Keep the lithium button batteries away from children
•  Dispose of the lithium batteries correctly in accordance with your local authorities

WARNING – KEEP BATTERIES OUT OF REACH OF CHILDREN

•  Swallowing may lead to serious injury or death in as little as 2 hours, due to chemical burns and potential perforation of the oesophagus.
•  If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (Australia) or 0800 764 766 (New Zealand) for fast, expert advice.
•  Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure.
•  Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
•  Tell others about the risk associated with button batteries and how to keep their children safe.

OPERATION

1.  Press the trigger to turn the tire pressure gauge on. The gauge will display •a.a• on the LCD Screen.
2.  Place the nozzle of the tire pressure gauge on the tire valve you wish to measure.
   • Press firmly to ensure a good seal and to prevent air from escaping.
3. Hold the gauge on the valve until the measurement display locks. It should only take a second if you have a good SEO L
4.  Remove the gauge to easily read the pressure reading.
5.  To change units, simply press the trigger to cycle through the four available pressure units (psi, Bar, kgf, kPa).
6.  The tire pressure gauge will automatically turn off after use. To manually turn off the gauge, press and hold the trigger

SPECIFICATIONS

• Range 0-150 psi/ 0-10 Bar/ 0-10 kgf /cm2 / 0-1000 kPa
• Display 21 x 10mm LCD display
• Power 3V Lithium coin cell
• Operating temperature -5-50°C I 23-122°F
• Automatic shutoff 30 or 60 seconds or press and hold the trigger for 3 seconds

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>