H Koenig NV700 Steam Cleaner Instruction Manual

H Koenig NV700 Steam Cleaner Instruction Manual

Explanation of symbols:

Safety instructions:

Please read these carefully and comply with them in order to prevent personal injury and damage to property.

Supplementary information

This device works with hot steam!

Intended Use

• The device is intended to be used exclusively for steam-cleaning waterresistant
  and heat-resistant surfaces, for example bathroom fittings,
  mirrors, tiles, shower cubicles, and certain floor coverings. Ask a specialist
  whether your flooring is suitable for cleaning with the steam cleaner. Always
  test the cleaning at a small spot first.

• The device is not suitable for surfaces which are sensitive to heat or moisture, for example wallpaper, velvet, silk, glued objects, unsealed and/or waxed wooden surfaces, soft plastic, leather and cold glass (with outside temperatures of below 10°C).

• The device is not suitable for cleaning electronic equipment and fragile objects.

• The device is for personal use only and is not intended for commercial applications.

• Use the device only as described in the instructions. Any other use is deemed to be improper.

• The warranty does not cover faults caused by incorrect handling, damage, calcification or repair attempts.

This also applies to normal wear and tear

Safety Instructions

Dangers of Injury

• This device is not intended for use by persons with reduced capacity on the physical, mental or sensory or lack of experience and knowledge (including children), unless they have had instructions to use the appliance by a person responsible for their safety use of the appliance and understand the hazards involved. Children should be supervised to ensure they do not play with the device.
• The device should only be used and stored out of the reach of children and animals. Improper use can lead to scalding and electric shock.
• Keep children and animals away from the packaging film. There is a danger of suffocation!
• Never aim steam directly at people, animals or plants. This can cause severe scalding.
• Only hold the device by the handle when you are operating it. There is a danger of scalding!
• Never leave the device unattended when it is connected to the mains.
• Shortly after use, the attachment used may still be very hot. You should therefore wait for a few minutes until it has completely cooled down before you detach it.
• Danger of scalding! Always allow the device to cool down completely before you pour water in or out, clean the device and/or store it away. Never attempt to open the water reservoir during use. Always make sure that the water reservoir is firmly shut before you use the device.
• Make sure that the connected mains cable does not present a trip hazard.
• This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved.
• Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
• Keep the appliance and its power cord out of reach of children under 8 years of age.
• When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock and/or injury in the event of misuse.
• Make sure that the voltage rating on the typeplate corresponds to your main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit.
• Please keep this document at hand and give it to the future owner in case of transfer of your device.
• The device is not intended to be operated by external timer means or a remote control system.

Danger of Fire

• Do not use the device in rooms containing easily ignitable dust or poisonous and explosive fumes.
• Do not insert anything into the openings of the device and make sure that these do not become clogged.

Danger of Electric Shock

• The device should only be connected to a properly installed plug socket with safety contacts. The plug socket must also be readily accessible after connection. The mains voltage must match the technical data of the device. Only use suitable extension cables whose technical data is the same as that of the device.
• Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• This device must be earthed when connected. Use only the appropriate plug. Do not try to circumvent the earthing.
• Never immerse the device in water or other liquids! Ensure that the device, the cable or the plug do not fall into water or become wet. Should the device fall into water, switch off the power supply immediately. Only then should you remove it from the water.
• Never touch the device, the cable or the plug with wet hands to prevent electric shocks.
• The steam must not be aimed directly at electrical equipment, mains cables or parts containing electrical components (for example inside ovens, fridges, switches and lights, microwave ovens, screens).
• Pull out the mains plug after each use before you remove/ change an attachment, top up/empty the water reservoir or clean the device. Always pull the plug and never the cable.
• Use the device only in closed rooms.
• Always check the device for damage before putting it into operation. Use the device only when it is completely assembled and operational. The device must not be used if it has been dropped, if obvious signs of damage are visible or if it has leaks.
• In the event of damage/faults, switch the device off immediately.
• Never try to repair the device, the mains cable or the mains plug yourself or replace parts. If defects occur, the device may no longer be used. Get in touch with the nearest customer service centre/specialist dealer or, in the event of damage, please contact our customer service department. Incorrect repairs may cause considerable risks to the user.

Avoiding Damage to Material, Property and the Device

• Position the cable in such a way that it does not become squashed or bent and does not come into contact with hot surfaces.
• Only switch on the device when the water reservoir is filled with water as otherwise the water pump may be damaged and the useful service life of the device may be shortened.
• Do not place any heavy objects on the device, the cable or the plug.
• Do not pull or carry the device by the cable.
• Do not use any other accessories. Use only original manufacturer’s accessories.
• Never pour any cleaning agent or other chemical additives into the device. This could destroy the device and safe working is no longer guaranteed.
• Never cover up the steam outlet openings and do not stick any objects into them.
• Maintain a sufficient distance from heat sources such as hobs or ovens in order not to damage the device.
• Do not drop the device or allow it to be knocked violently.
• Do not expose the device or accessories to extreme temperatures, wide temperature fluctuations, open fire, direct sunlight, and do not expose the device housing to any moisture or wet conditions.
• Always try cleaning first at a small, inconspicuous spot.
• Never direct the steam at one spot for too long.
• Never use the device on cold glass surfaces (at temperatures of below 10°C). The hot steam could cause the glass to shatter.
• In the case of surfaces treated with wax, the heat and steam may remove the wax!
• Do not use any caustic or abrasive cleaning agents (e.g. vinegar) or cleaning pads to clean the device.
• Put the device back into its storage position only once it has completely cooled down and there is no more water in the water reservoir.
• Store the device in a dry, clean place that is not accessible to children and animals.

Items Supplied

Device Overview

Before Initial Use

Caution

• Danger of suffocation from plastic films and bags! Keep children and animals away from the packaging material.
• Water residues in the water reservoir are attributable to the fact that this device has been tested and do not constitute a defect.
• Unpack the items supplied and check them for completeness (see the “Items Supplied” chapter) and transport damage. If the device, plug, mains cable or accessories do have damage, do not use the device(!), but contact our customer service department.
• Before using the device, remove all packaging materials and any labels that may be on the device and are used for protection during transportation or for advertising.

Mounting the Accessories

Caution

• plug and never the cable.
• Shortly after use, the attachment used may still be very hot. You should therefore wait
  for a few minutes until it has completely cooled down before you detach it.

Long Nozzle Attachment
The long nozzle attachment (10) can be used anywhere. It is ideally suited to cleaning heat resistant surfaces in the kitchen and bathroom, corners and places that are hard to reach.

The long nozzle attachment can have the brush attachment (8)
or the curved attachment (7} plugged onto it.

• Plug the long nozzle attachment as fer as it will go onto the steam nozzle (18) of the device.

Brush Attachments
The brush attachment (8) is used for cleaning all sorts of possible objects, e.g. ovens, bath room fittings, bathtubs, sinks, toys.

• Plug the brush attachment directly onto the steam nozzle (18) of the device or the long nozzle attachment (10).

Curved Attachment
Use the curved attachment (7) for cleaning places or crevices which are hard to reach.

• Plug it directly onto the steam nozzle (18) of the device or the long nozzle attachment (10).

Combination attachment
The combination attachment (6) is used in conjunction with the cleaning cloth or the scraper lip (11).

• Plug the combination attachment as far as it will go onto the steam nozzle (18) of the device and screw it on tight.

Cleaning Cloth
The cleaning cloth is suitable for cleaning and refreshing upholstery and textiles and also for scratch-sensitive and fairly large surfaces, e.g. shower cubicles.

• Pull the cleaning cloth over the combination attachment (6). Allow the cleaning cloth to cool down after use before you detach it!

Scraper Lip
Use the scraper lip (11) to clean smooth surfaces such as window panes, glass doors, mirrors or ceramic tiles.

Floor Attachment, Extension tube, Adapter
The floor attachment (4) is used for cleaning floors. It is attached to the device with the aid of
the connecting piece (5), extension tube (3) and adapter (2). You can use the floor attachment with or without a floor cloth. Without the floorcloth the bristles of the floor attachment will remove stubborn dirt. The floor cloth is suitable for gentle cleaning.

1. Plug the adapter (2) as far as it will go onto the steam nozzle (19) of the device and screw it on tight.
2. Screw the connecting piece into the floor attachment.
3. Push the narrow end of the extension tube into the connecting piece. The locking lug of the extension tube must lock in the matching opening in the connecting piece.
4. In the same way, plug the adapter into the open end of the extension tube or, for a longer tube, the second extension tube and then the adapter into this.

To disassemble the extension tube, press the release buttons on the extension tube and adapter and pull it out  To remove the adapter from the device, turn it in the opposite direction and pull it off.

Floor Cloth
Use the floor cloth to gently wipe down the floor.

1. The floor attachment (4) has two clips on the top of it. Press down the end of the clip in the middle of the floor attachment to open the clip.
2. Insert one end of the floor cloth and release the clip.
3. Stretch the floor cloth over the bottom of the floor attachment and secure it in the second clip.

Filling the Water Reservoir

Caution

• Always pull out the mains plug and allow the device to cool down completely before you
  open the water reservoir. Otherwise there could be an uncontrolled emission of steam.

• Do not overfill the water reservoir. Pour a maximum of 260 ml of water into the device.

• Never hold the device under the tap and never immerse it in water to pour water into the reservoir.

• Never pour any cleaning agent or other additives into the device. This could destroy the
  device and safe working is no longer guaranteed.

1. The device has a safety reservoir cap (12). It cannot be removed if the water reservoir is
   pressurised. Press the reservoir cap down and unscrew it in the anticlockwise direction.
   To release pressure from the water reservoir, keep pressing the steam trigger (15)
   until steam stops emerging from the device. The water reservoir can then be opened.

2. Pour water into the water reservoir using the measuring cup and the funnel supplied.

3. Screw the reservoir cap back into the device.

Use

• Never aim steam directly at people, animals or plants. This can cause severe scalding.

• Only ever hold the device by the handle and not by the attachment while operating the device as it can become very hot. There is a danger of scalding!

• Always work with sufficient lighting.

• Make sure that you do not trip over the mains cable while using the device.

• Never use the device without water!

• Never use the device on cold glass surfaces or at outside temperatures of below 10 °C.
  The hot steam could cause the glass to shatter.

• Always try cleaning first at a small, inconspicuous spot.

• Never direct the steam at one spot for too long.

• The water reservoir must not be opened during use!

• The device has a safeguard (13) which blocks the steam trigger (15) so that it cannot be pressed accidentally. To (de)activate the safeguard, push in the securing pin.

• Water may emerge from the attachment when you first start using it. This is normal and does not constitute a defect with the device.

• As the pipe in the device has to fill with steam, you may need to press the steam trigger (16) several times when you start using it before steam starts emerging.

• How much steam is emitted depends mainly on the speed and frequency with which the steam trigger (15) is pressed. The faster you press it, the more steam is emitted.
  However, this is at the expense of the temperature.

1. Attach the attachment you want to the device (see the “Mounting the Accessories” chapter).

2. Insert the mains plug into a properly installed mains socket that is easily accessible. Steam starts to be generated and the control lamp (17) lights up.

3. Wait until the control lamp goes out. Operating temperature has then been reached and you can start steam-cleaning: Press the steam trigger (15) and move the attachment over the surface to be cleaned as you do so.
   If the steam trigger cannot be pressed, the safeguard (13) has probably been activated. Push in the securing pin to release the safeguard.

4. If the control lamp lights up, the temperature has dropped. Let go of the steam trigger and only press it again once the control lamp has gone out.

5. If the water reservoir is empty, steam will no longer be produced. If you want to top up the water in the reservoir (see the “Filling the Water Reservoir” chapter) or want to stop working, pull the mains plug out of the plug socket and allow the device to cool down completely. Keep pressing the steam trigger if necessary until no more steam emerges from the device. The water reservoir can then be opened.

6. Empty and clean the water reservoir each time after you use the device (see below) to prevent deposits in the reservoir and thus damage to the device!

After Use / Cleaning the Device

• Empty and clean the water reservoir each time after you use the device to prevent deposits in the reservoir and thus damage to the device!
• The water reservoir cannot be opened while it is pressurised. Pull out the mains plug and keep pressing the steam trigger until no more steam emerges from the device. The reservoir cap can then be screwed off.
• Always pull the mains plug out of the plug socket when you are not using the device, before you open the water reservoir or remove an attachment.
• The attachment and the water in the reservoir may still be hot shortly after use. You should therefore wait until they have completely cooled down before you remove the attachment or empty the water reservoir.
• Never immerse the device in water or other liquids!
• Never touch the device, the cable or the plug with wet hands.
• To extend the useful service life of the steam cleaner, it should be regularly descaled with a standard commercial descaling agent. Note the manufacturer’s instructions on the packaging of the descaling agent.
• Empty the water reservoir: Unscrew the reservoir cap and remove it Hold the device over a sink or similar outlet and allow all of the water to run out of the reservoir.
• Wash the cleaning cloth and floor cloth after every use in accordance with the washing instructions.
• Clean the attachments if necessary with clear, warm water.
• If necessary, wipe down the outside of the device with a soft, slightly damp cloth and dry it with a soft cloth.
• Allow all device and accessory parts to dry completely before you store them in a clean and dry place that is inaccessible to children.

Troubleshooting

If the device should stop working properly, first check whether you are able to correct the
problem yourself.

Do not attempt to repair a defective electrical device yourself!

ENVIRONMENT

CAUTION:

Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.

Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin – 77290 Mitry Mory – France
www.hkoenig.com – sav@hkoenig.com – contact@hkoenig.com – Tél: +33 1 64 67 00 05

Read More About This Manual & Download PDF:

References

• H.Koenig : Le spécialiste du petit électroménager
• HKOENIG SAV: Pièces détachées ,accessoires, FAQ
• HKOENIG SAV: Pièces détachées ,accessoires, FAQ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>