H Koenig KREP29 Crepes Maker Instruction Manual

: June 6, 2024
: H Koenig

Table of Contents

H Koenig KREP29 Crepes Maker
OPERATING MANUAL
General Safety information
Design and Function
Before first use
CLEANING AND MAINTENANCE
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

H Koenig KREP29 Crepes Maker

H Koenig KREP29 Crepes Maker image

OPERATING MANUAL

General
Please read the information contained herein so that you can become familiar with your device quickly and take advantage of the full scope of its functions.
Your Crepes Maker KREP29 will serve you for many years if you handle it and care for it properly.
We wish you a lot of pleasure in using it!

Information on this manual

These Operating Instructions are a component of the Crepes Maker KREP29 (referred to hereafter as the device) and provide you with important information for the initial commissioning, safety, intended use and care of the device.
The Operating Instructions must be available at all times at the device. This Operating Manual must be read and applied by every person who is instructed to work with the device:

Commissioning
Operation
Troubleshooting and/or
Cleaning

Keep the Operating Manual in a safe place and pass it on to the subsequent owner along with the device.

Warning notices

The following warning notices are used in the Operating Manual concerned here.

DANGER
A warning notice of this level of danger indicates a potentially dangerous situation.
If the dangerous situation is not avoided, this can lead to death or serious injuries.
Observe the instructions in this warning notice in order to avoid the danger of death or serous personal injuries.

WARNING
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to serious injuries.
Observe the instructions in this warning notice in order to avoid the personal injuries.

Please note

A notice of this kind indicates additional information, which will simplify the handling of the machine.

Limitation of liability

All the technical information, data and notices with regard to the installation, operation and care are completely up-to-date at the time of printing and are compiled to the best of our knowledge and belief, taking our past experience and findings into consideration.
No claims can be derived from the information provided, the illustrations or descript ions in this manual. The manufacturer does not assume any liability for damages arising as a result of the following:

Non-observance of the manual
Uses for non-intended purposes
Improper repairs
Technical alterations, modifications of the device
Use of unauthorized spare parts Modifications of the device are not recommended and are not covered by the guarantee.

All translations are carried out to the best of our knowledge. We do not assume any liability for translation errors, not even if the translation was carried out by us or on our instructions.
The original German text remains solely binding.

Safety
This chapter provides you with important safety notices when handling the device.
The device corresponds with the required safety regulations. Improper use can result in personal or property damages.

Intented Use
This device is only intended for use in households in enclosed spaces for:
Baking of crepes and mini pan-cakes
Uses for a different purpose or for a purpose which exceeds this description are conside red incompatible with the intended or designated use.

WARNING
Danger due to unintended use!
Dangers can emanate from the device if it is used for an unintended use and/or a different kind of use.

Use the device exclusively for its intended use.
Observe the procedural methods described in this Operating Manual.

Claims of all kinds due to damages resulting from unintended uses are excluded. The User bears the sole risk.

General Safety information

Please note
Please observe the following general safety notices with regard to the safe handling,of the device.

Read all these instructions before using the appliance.
Examine the device for any visible external damages prior to using it. Never put a
damaged device into operation .
Only qualified electricians , who have been trained by the manufacturer, may carry out any repairs that may be needed. Improperly performed repairs can cause considerable dangers for the user .
Only customer service departments authorized by the manufacturer may carry out repairs on the device during the guarantee period, as otherwise the guarantee entitlements will be null and void in the event of any subsequent damages .
Defective components must always be replaced with original replacement parts. Only such parts will guarantee that the safety requirements are fulfilled .
Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped . If the supply cord is damaged , it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Keep the appliance and its cord out of reach of children less than 8 years.
The appliance is not intended to be operated by means of an external timer or separate remote- control system
Unplug from the outlet when not in use and before cleaning.
Use only the accessory recommeded by the manufacturer or the device could be
damaged.
Do not immerse in water, dishwashe r or any other liquids.
Do not touch the device with wet hands.
Do not leave the device unsupervised during operation.
Unplug after use.
Do not cut the food on the Danger due to unintended use!
Dangers can emanate from the device if it is used for an unintended use and/or a different kind of use.
- Use the device exclusively for its intended use.
- Observe the procedural methods described in this Operating Manual.
  Claims of all kinds due to damages resulting from unintended uses are excluded . The User bears the sole risk.
  device.
  Use exclusively heat resistant plastic or wooden flatware so that the device will not be damaged.
Do not use metal utensils, they could scratch or damage the non-stick coating of the device.
Do not move the device during operation.
This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the dangers involved.
Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
Keep the appliance and its power cord out of reach of children under 8 years of age.

Sources of danger Danger of burns

WARNING
The food prepared with the device, the device and the surfaces of the device can become very hot.
Please observe the following safety notices in order not to burn or scald yourself or others

• The outer surfaces of the device and the device can become very hot.
• The temperature of the acessible surface can become very hot when the device is operating.
• Do not touch hot surfaces of the device, use pot holders. The device is very hot after the
• end of baking process.
• Be careful ! when handling hot food.
• Let the device cool down before cleaning.

Danger of fire

WARNING
There is a risk of fire if the appliance is used incorrectly.
Adhere to the following safety instructions in order to avoid a risk of fire:

During operation remove all inflammable items from the vicinity of the appliance.
During operation keep distance to walls and flammable materials for example curtains.
Never cover the device during operation to prevent overheating.
Avoid overheating oils and fats for extended periods. Overheated oil and fat can ignite rapidly.

Dangers due to electrical power
DANGER
Mortal danger due to electrical power !

Mortal danger exists when coming into contact with live wires or subassemblies ! Observe the following safety notices to avoid dangers due to electrical power:
Do not open the housing on the device under any circumstances. There is a danger of an electrical shock if live connections are touched and the electrical or mechanical structure is altered. In addition, functional faults on the device can also occur.
Do not operate this appliance if it has a damaged cord or plug, if it is not work ing properly or if it has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
Do not unplug by pulling the cord pull the plug.

Commissioning

This chapter provides you with important safety notices during the initial commissioning of the device. Observe the following notices to avoid dangers and damages :

Safety information

WARNING
Personal and property damages can occur during commissioning of the device! Observe the following safety notices to avoid such dangers:

Packaging materials may not be used for playing. There is a danger of suffocation.

Unpacking
Remove the device out of the carton, remove the packaging material, shovel and measuring container.

Disposal of the packaging
The packaging protects the device against damages during transit. The packag ing materials are selected in accordance with environmentally compatible and recycling-related points of view and can therefore be recycled.

Returning the packaging back to the material loop saves raw materials and reduces the quantities of accumulated waste. Take any packaging materials that are no longer required to «Green Dot» recycling collection points for disposal.

Please note

If possible, keep the original packaging for the device for the duration of the guarantee period of the device,in order that the device can be re-packaged properly in the event of a guarantee claim.

Setup location requirements

In order to ensure the safe and trouble-free operation of the device, the setup location must
fulfill the following

prerequisites:

Place the device on a firm, flat, level and heat-resistant surface with sufficient loadbearing capacity for the device and its contents.
Choose the setup location in such a way that children cannot reach any hot surfaces on the device.
The device is not intended to be installed in a wall or a built-in cupboard.
Do not set up the device in a hot, wet or extremely damp environment or near flammable material.
Do not place the device near a gas or electric cooker or an oven.
The device requires an adequate flow of air in order to operate correctly. Leave a clearance of 20 cm all around the device.
Do not cover up any openings on the device and do not block these off.
The electrical socket must be easily accessible so that the power lead can be disconnected easily, in the case of an emergency .
The device and power cord should not come in contact with the hot surface. The device could be damaged.
The installation and assembly of this device in non-stationary setup locations must be carried out by specialist companies/ electricians, provided they guarantee the prerequisites for the safe use of this device. \

Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instructions
must be observed for the electrical connection:

Before connecting the device, compare the connection data (voltage and frequency) on the rating plate with those of your electrical network. This data must agree in order that no damages occur in the device. If in doubt, ask your qualified electrician.
The electrical outlet must be protected by a 16A safety cut-out switch, separate ly from other electricity consumers.
The connection between the device and the electrical network may employ a 3-meter-long (max.) extension cable with a cross-section of 1.5 mm2. The use of multiple plugs or gangs is prohibited because of the danger of fire that is involved with this.
Make sure that the power cable is undamaged and has not been installed under the oven or over hot or sharp surfaces.
The electrical safety of the device is only guaranteed if the device is connected to a properly installed protective conductor system. Operations using an electrical outlet without a protective conductor are prohibited. If in doubt, have the house installation checked over by a qualified electr ician.
The device must not be used if it has been dropped, it obvious signs of damage are visible or if it has leaks.
The manufacturer cannot be made responsible for damages that are caused by a missing or damaged protective conductor.

Design and Function

This chapter provides you with important safety notices on the design and function of the device.

Overview

baking surface
temperature levels
temperature control ler
control lamp
base
crepes dough spreader
flat turner

Rating plate
The rating plate with the connection and performance data can be found on the bottom side of the device .

Operating and Handing
This chapter provides you with important notices with regard to operating the
device. Observe the following notices to avoid dangers and damages.

WARNING
Do not let the device unsupervised during operation to be able to react quickly in case of dangers.

Before first use

Clean the baking surface with a damp cloth.
At first use there could be a little production of smoke. Therefore use the device without food on highest level for 10 minutes and let it cool down after this. Wipe the device with damp cloth after cooling down.

Use

Plug in and turn the temperature controller to desired level (for first use we recommend level 6. Depending on the desired degree of browning , you can switch to higher or lower level). The control lamp will turn red and the device is heating up. When temperature is reached the control lamp will turn green.
Place a small amount of dough on the baking surface and spread with the crepes dough spreader in an evenly rotating motion.
Bake the crepe until the surface is not liquid any more and until the crepe can be moved back and forth easily.
Turn the crepe with the flat turner and let it bake. The crepe should be baked thoroughly but not too brown. Lift the crepe with the flat turner and remove it from the baking surface.
Now you can spread the crepe for example with jam and roll it. Pull the plug when you have finished the desired amount of crepes .

Please note

During operation the control lamp will switch between green and red. This indicates that the device maintains the temperature .
Do not use the device for cooking or defrosting of frozen food .
Use only thawed food .
Moisture the crepes dough spreader a little bit so that the dough will not stick so easy .
Reduce the temperature if the crepes are too brown .
For mini pan-cakes place a little amount of dough on the baking surface and bake it until the pan cake can easily be released . Then you can turn the mini pan cakes and bake them until they have the desired browning.

Basic Recipe
Ingredients (for 20 portions):
250 g flour, 3 eggs , 500 ml milk, 1 pinch of salt.
Mix all ingrients in a bowl to form the dough. Let the dough steep for 1
hour. As lower the viscosity of the dough is as thinner the crepes will be.

CLEANING AND MAINTENANCE

This chapter provides you with important notices with regard to cleaning and maintaining the device . Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
Safety information
ATTENTION
Please observe the following safety notices, before you commence with cleaning the device:

The device must be cleaned and food residues must be removed at regular intervals. If the device is not maintained in a clean condition, this will have a detrimental effect on the service life of the device and can also result in a dangerous condition in the device as well as in the growth of fungus and bacteria.
Unplug the plug from the wall power outlet prior to cleaning.
The device is hot after it is used. There is a danger of burns! Wait until the device has cooled down.
If dampness penetrates into the device, this can damage the electronic components.
Please ensure that no liquid can enter the interior of the device through the ventilation slots.
Do not use any aggressive or abrasive cleaning agents or solvents.
Do not scrape off stubborn dirt with hard items.

CLEANING

Wipe the housing with a soft cloth.
Remove dough and oil-res idues with a paper towel and carefully wipe the baking surface with a damp cloth.
Allow the device to dry before storing it.

Troubleshooting

This chapter provides you with important notices with regard to operating the device. Observe the following notices to avoid dangers and damages :

Safety notices
ATTENTION

Only qualified electricians , who have been trained by the manufacturer, may carry out any repairs on electrical equipment.
Improperly performed repairs can cause considerab le dangers for the user and damages to the device.

ENVIRONNEMENT

CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.

Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France www.hkoenig.com – https://en.hkoenig.com – Tél: +33 1 64 67 00 05