tuya R9 Smart Video Doorbell User Guide
- June 6, 2024
- Tuya
Table of Contents
R9 Smart Video Doorbell
CALL
After opening the package, please make sure the doorbell (hereinafter referred
to as the “Equipment”) is in good condition. Make sure the belowing parts is
included.
CALL
The device will send notification to your phone automatically, when detected object movement.
Charging Port
Micro USB Port Charging
TF Card
TF Card Slot
Switch
Switch on /off
CALL
Open App Store (for iOS) or Google Play Store (for Android outside China) or
Yingyongbao Store(For Android inside China) on your follow the belowing,
Search for “TuyaSmart” or scan QR code as following to download the right App
for your phone.
If you didn’t hear the voice notification, please RESET the device by pressing
the home button for 5 seconds. Until the LED indicator turns off, the device
will restart to default setting automatically.
Click “Continue”and use camera to scan the QR Code displayed on you phone, make sure to keep 15-20cm distance between the mobile device to the doorbell, When you hear the prompt “Connecting the network”, tap “I heard a Prompt” and wait until the device connected successfully.
Support following functions Two-way Audio; Video recording to local file; Take
Photo; Playback video when the Micro SD Card plugged.
In the device list section, it shows all devices with successfully
connections, click the corresponding device to view live videos directly.
Click the corresponding device to view live videos directly in the device list
section, You could choose ” ” at the top right corner to enter device setting.
The activated device lasts for 30 seconds before it will be on standby.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: — Reorient or relocate the receiving antenna. —
Increase the separation between the equipment and receiver. — Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. — Consult the dealer or an experienced radio/TV
technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Radiation Exposure Statement This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the
radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>