KOSETON E9 True Wireless Earbuds User Manual

June 6, 2024
KOSETON

KOSETON E9 True Wireless Earbuds

KOSETON-E9-True-Wireless-Earbuds

Auto Power – On

KOSETON-E9-True-Wireless-Earbuds-
fig-1

Auto Power – Off

KOSETON-E9-True-Wireless-Earbuds-
fig-2

Charge Case

KOSETON-E9-True-Wireless-Earbuds-fig-3Charge EarbudsKOSETON-E9-True-Wireless-Earbuds-
fig-4Auto Pairing Left and Right SideKOSETON-E9-True-Wireless-Earbuds-fig-5

Manual Power – On/Off Left and Right Side

KOSETON-E9-True-Wireless-
Earbuds-fig-6Volume UP Right SideKOSETON-E9
-True-Wireless-Earbuds-fig-7

Volume Down

Left SideKOSETON-E9-True-Wireless-Earbuds-fig-8

Play/PauseLeft or Right Side

KOSETON-E9-True-Wireless-Earbuds-fig-9Previous Track
Left SideKOSETON-E9-True-Wireless-Earbuds-fig-10Next Track Right SideKOSETON-E9-True-
Wireless-Earbuds-fig-11Answer/End Left or Right SideKOSETON-E9
-True-Wireless-Earbuds-fig-12

Activate Voice AssistantLeft or Right Side

KOSETON-E9-True-Wireless-
Earbuds-fig-13

specification

  • Bluetooth Version: 5.0
  • Audio Decoding: SBC, AAC
  • Bluetooth Protocol: HSP, HFP, A2DP, AVRCP, SPP Wireless Frequency: 2.4GHz
  • Earbud Battery: 45mAh
  • Charging Case: 400mAh
  • Maximum Charging Voltage: 5V/1A
  • Play Time: 4~6 hours (Medium Volume) Charging Time: 1~1.5 hours
  • Charging Case Time: 2 hours
  • Charging Interface Type: USB-C
  • Connection Distance: 10m
  • Sweat and Water Resistant: IPX5

WARNING

  1. Do not use a wall charger with more than 5V and 1A output.
  2. Prohibit connection with laptops or desktops.
  3. Do not use while swimming.
  4. Use a dust-free cloth to clean the surface.

Comfortable to Wear
Distinguish the LEFT and RIGHT earbuds, and put the arbuds slowly along the ear canal. Adjust to the most comfortable angle to ensure that listening to music will not be fatigued.

Charge Correctly
Put the earbuds flat in the charging case. Ensure that the metal charging contacts of the earbuds are fully aligned with the charging case.

Long Time Idle Battery is Exhausted
Take out the two earbuds. Fully charge the charging case separately. Put the earbuds into the charging case after fully charged.

No Sound From Earbuds

  1. Put the two earbuds in the charging case.
  2. Take out the RIGHT earbuds separately. Press and hold for 6s to turn it off, and then put it in the charging case.
  3. Take out the LEFT earbuds separately. Press and hold for 6s to turn it off, and then put it in the charging case.
  4. Take out two earbuds at the same time and double-click. Prompt tones ” PAIRING ” and ” CONNECTED “, the earbuds pairing and connection are completed.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals