iHome IH-OW103-101 Flow Smart Outdoor Plug with Dual Sockets User Guide
- June 6, 2024
- iHome
Table of Contents
iHome IH-OW103-101 Flow Smart Outdoor Plug with Dual Sockets
Thank you for purchasing your iHome smart home product, powered by Geeni. Get
started using your new devices by downloading Geeni, one convenient app that
manages everything straight from your phone or tablet. Easily connect to
your home Wi-Fi, and control multiple devices from the touch of your
fingertips.
download the Geeni App from App Store or Google Play.
Register an account on your Geeni App.
-
Enter your mobile phone number or email address
-
**Enter the verification code and create a password.
**
- **Log in to the App.
**
-
Plug In
Plug the iHome device into the wall. Make sure the indicator light on the device is flashing rapidly, indicating the device is ready to connect. -
Add device:
Auto Discover Device
Your device is now able to be discovered magically to connect to your home Wi- Fi network. It’s quicker and easier than ever to connect. -
The Geeni app will automatically detect your device using its wireless Bluetooth connection. Tap “Add Now”.
-
The Geeni app will automatically detect the network that your smartphone is connected to. Enter the password to your Wi-Fi network, then tap “Next Step” and the device will connect.
-
The Geeni app will try to connect your device.
NOTE: Geeni can’t connect to 5GHz networks.
*If the connection fails, try to connect using AP Mode.
Add device:
Easy Mode
-
In the Geeni app, on the top corner of the Devices screen, click Choose “Smart Power”.
-
Make sure the indicator light on the device is flashing rapidly, indicating the device is ready to connect using Easy Mode. If not, press and hold the Button for 3 seconds until the indicator light is flashing rapidly, then press “Next Step”.
-
**Enter your Wi-Fi network and password.
**
- The Geeni app will try to connect your device.
NOTE: Geeni can’t connect to 5GHz networks.
*If the connection fails, try to connect using AP Mode.
Add device:
Backup AP Mode
-
Make sure the device is in AP Mode, blinking slowly *see reset instructions
-
In the Geeni app, on the top corner of the Devices screen, click Choose “Smart Power” Choose “AP Mode” in the top corner.
-
Click Next and enter your Wi-Fi details.
-
Follow the instructions to choose the device from your Wi-Fi list.
-
The device will connect.
NOTE: Geeni can’t connect to 5GHz networks.
How do I reset the device and what does the blinking light mean?
Reset the plug by pressing and holding the button for 3 seconds until the
indicator light is flashing rapidly.
-
Reset one time
(Press and hold) to reach Easy mode (Fast blinking, 2x per second) -
Reset again
(Press and hold) to reach AP Mode (Slow blinking, every 3 seconds)
Frequently Asked Questions
Can I share with family and friends?
Yes, you can share your plugs with family and friends who will have access to
control your bulbs, plugs, cameras, and other devices powered by Geeni. In the
Geeni app, press the Profile button and click on the “Device Sharing” button,
and you will be able to give or revoke sharing permissions. In order to share,
the other user should already have downloaded the Geeni app and registered a
new account.
Can I group multiple iHome devices together?
Yes, you can group multiple devices of the same type together, by room,
location, or however else you want. The same devices can be in multiple
groups. (For example, create a group for “Bedroom” and another group for
“Entire House”, and your Bedroom lights can be included in both groups). From
your main device list, click on one of the devices you want to group. Press
the “•••” button on the top right for advanced settings, and click Create
Group. You’ll then be able to choose which devices you’d like to group
together and will be able to rename them.
How many devices can I control?
Geeni app can control an unlimited amount of devices in an unlimited amount of
locations. Your router may have a limit of how many devices can be connected
to one router. My iHome device has a funny name. How do I rename it?From your
main device list, click on one of the devices you want to rename, press the
“•••” button on the top right for advanced settings, and click Modify Device
Name (or Modify Group Name, if applicable). You’ll then be able to choose a
more familiar name.The device appears offline or unreachable, what should I
do?Make sure your Wi-Fi router is online and in range. Make sure you have the
latest Geeni functionality by clicking “Check for firmware update” in your
device settings.
What’s the wireless range?
The range of your home Wi-Fi is heavily dependent on your home router and the
conditions of the room. Check with your router specifications for exact range
data.
If my Wi-Fi/Internet goes down, will Geeni still work?
iHome products need to be connected to Wi-Fi in order to use them remotely.
Troubleshooting
- Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
System Requirements
- Mobile device running iOS® 9 or higher or Android™ 5.0 or higher
- Existing Wi-Fi Network
Technical Specifications
- Input voltage: 125V
- Input frequency: 60Hz
- Max. Load current: 15A
- Max. Power: 1875W
- Wi-Fi: IEEE 802.11n, 2.4 GHz
- Not compatible with 5GHz Wi-Fi networks)
To control your iHOME smart bulbs, plugs or surge protectors, just say “OK Google,“ or “Hey Google,“ and ask. Make sure your devices are already set up using the Geeni app.
Things you can say:
- **Open the Google Home app and go to Home Control in the menu.
**
- **Tap the “+“ button.
**
- **Choose “Geeni“from the list of Home Control partners.
**
- Authorize your account with Google Assistant using the username and password from your Geeni app.
Now your Google Home app and iHOME devices are linked! Your’re now able to say “Hey Google“ and control your iHOME devices.
- At any time, go into the “Home Control“ section of the Google Home app to set nicknames and rooms for your devices. You can rename your devices in the Geeni app, and Google Assistant will refer to them by the same name.
- So if you rename a smart plug to “Living Room“ or a nickname like “Blossom,“ then Google Assistant will use that same name later on. You can always give it a nickname using the Google Home app as well. You can also assign plugs to a specific room, like “Bedroom“ or “Kitchen.“
To control your iHOME smart bulbs, plugs or surge protectors, just ask Alexa. Make sure your devices are already set up using the Geeni app.
Things you can say:
*Some commands require compatible devices.
-
Open the Alexa app and go to Skills in the menu
-
Search for Geeni then tap Enable.
-
Authorize your account with Smart Home Skills using the username and password from your Geeni app.
-
Choose “Discover Devices.“ After a few seconds your iHOME devices will be displayed under Smart Home in the
Alexa app. -
Choose “Discover Devices.“ After a few seconds your iHOME devices will be displayed under Smart Home in the
Alexa app. -
Alternatively, you can create an Alexa group, like “Bedroom“ or “Downstairs,“ and add the device to the group. Alexa will recognize the group name in the Alexa app, or the device name in the Geeni app.
-
More information is available at: http://tinyurl.com/alexa-smart-home-groups
Important Information:
Important Information: Before installing, read and follow all precautions,
including the following:
CAUTION: SUITABLE FOR INDOOR USE ONLY. DO NOT IMMERSE IN WATER. DO NOT
EXCEED RATED CAPACITY.
Support:
If you encounter any issues, please contact us at support.mygeeni.com for
help.
888-232-3143 Toll-free
To explore our full selection of products, visit us at: ihome.mygeeni.com © 2021 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006. The illustrated product and specifications may differ slightly from those supplied. iHome is a registered trademark of SDI Technologies Inc., used under license. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google, Google Play, and related marks and logos are trademarks of Google LLC. iOS is a registered trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. All other trademarks and trade names are those of their respective owners. Made in China
FCC Notice:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.