dji Phantom 4 Pro+ V2.0 Quadcopter User Guide

dji Phantom 4 Pro+ V2.0 Quadcopter

Phantom 4 Pro+ V2.0

The DJI PHANTOMTM 4 Pro+ V2.0 is a smart prosumer flying camera capable of shooting 4K video at 60 fps and at up to 100 Mbps, and capturing 20 megapixel stills. 4 directions of obstacle avoidance allow it to intelligently avoid obstacles during flight. Using TapFlyTM and ActiveTrackTM through the DJI GOTM 4 app, you can fly anywhere visible on your screen or track a moving subject smoothly and easily with a simple tap. The camera uses a 1-inch CMOS sensor offering unprecedented clarity, lower noise, and better quality images.

In addition to the above features, improved propulsion system efficiency means aircraft noise is 4dB (60%) lower than on the Phantom 4 Pro+ V2.0.

1. Gimbal and Camera
2. Downward Vision System*
3. Micro USB Port
4. Camera/Linking Status Indicator and Link Button
5. Camera Micro SD Card Slot
6. Forward Vision System
7. Infrared Sensing System*
8. Front LEDs
9. Motors
10. Propellers
11. Aircraft Status Indicators
12. Antennas
13. Rear Vision System
14. Intelligent Flight Battery
15. Power Button
16. Battery Level Indicators

The Vision and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and watch the tutorials in the DJI GO 4 app or on the official DJI website to learn more.
http://www.dji.com/phantom-4-pro-v2

Remote Controller

The powerful remote controller of the Phantom 4 Pro+ V2.0 has a transmission range extending up to 6.2 mi (10 km)*. It features physical buttons and dials to control exposure, camera tilt, photo capture, and video recording.
Built into the remote controller is DJI’s latest long-range transmission technology OCUSYNCTM, providing a live HD view from the Phantom’s camera directly on the display. Dual frequency support makes the HD video downlink more stable.

1. Power Button

2. Return-to-Home
   (RTH) Button

3. Control Sticks

4. Speaker

5. Status LED

6. Battery Level LEDs

7. Power Port

8. Display Screen

9. Sleep/Wake Button

10. Microphone

11. Antennas

12. Handle Bar

13. Gimbal Dial

14. Camera Settings Dial

15. Record Button

16. Flight Mode Switch

17. Shutter Button

18. Intelligent Flight Pause Button

19. C1 and C2 Buttons (customizable)

20. Micro USB Port

21. HDMI Port

22. Micro SD Card Slot

23. USB Port

The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left and right movements. The gimbal dial controls the camera’s tilt.

The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electro-Magnetic Interference, and at an altitude of about 400 feet (120 meters).

Using Phantom 4 Pro+ V2.0

1. Watch the Tutorial Videos
   Watch the tutorial videos at www.dji.com or in the DJI GO 4 app.

2. Check the Battery Levels
   Press once to check the battery level. Press once, then again and hold to turn on/off.

3. Charge the Batteries
   When charging is complete, the battery level indicators will automatically turn off.

4. Prepare the Remote Controller
   

5. Prepare for Takeoff
   First-time activation requires your DJI account and internet connection.
   Check that the propellers are secure before each flight.
   

6. Flight

Ready to Go (GPS)
Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app indicates ‘Ready to Go (GPS)’ or ‘Ready to Go (Vision)’ if flying indoors.

In the DJI GO 4 App

Auto Takeoff

The aircraft will take off and hover at an altitude of 4 feet (1.2 meters).

Auto Landing

The aircraft will land vertically and stop its motors.

Return-to-Home (RTH)

Bring the aircraft back to the Home
Point. Tap again to stop the procedure.

Normal

You are in control of the Phantom, with satellite and Return-to-Home support.

TapFly

Tap on your screen to fly your Phantom in that direction, avoiding obstacles as it flies.

ActiveTrack

Mark an object on your screen to track it as it moves.

• Watch the tutorial in the DJI GO 4 app or on the official DJI website to learn more.

• Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks. Refer to the Disclaimer and Safety Guidelines for more details.
  

• Rotating propellers can be dangerous. Do not start the motors when there are people nearby.

• Always keep your hands on the remote controller so long as the motor is still spinning.

• Stop motor mid-flight: Pull the left stick to the bottom inside corner while simultaneously pressing the RTH button. Only stop motors mid-flight in emergency situations when doing so can reduce the risk of damage or injury.
  Refer to the user manual for details.

It’s important to understand basic flight guidelines, for the safety of both you and those around you. Don’t forget to read the Disclaimer and Safety Guidelines.

Specifications

• Aircraft
  Weight (Battery & Propellers Included)         1375 g
  Max Ascent Speed                                          S-mode: 6 m/s; P-mode: 5 m/s
  Max Descent Speed                                          S-mode: 4 m/s; P-mode: 3 m/s
  Max Speed                                                      45 mph (72 kph) (S-mode); 36mph (58 kph) (A-mode);
  31 mph (50 kph) (P-mode)
  Max Service Ceiling Above Sea Level          19685 ft (6000 m)
  Max Flight Time                                          Approx. 30 minutes
  Operating Temperature                                  32° to 104° F ( 0° to 40° C)
  GNSS GPS+GLONASS
  Operating Frequency                                  2.400 – 2.483 GHz and 5.725 – 5.850 GHz
  Transmitter Power (EIRP)                          2.4 GHz: ≤26 dBm (FCC); ≤20 dBm (CE); ≤20 dBm (SRRC)
  5.8 GHz: ≤26 dBm (FCC); ≤14 dBm (CE); ≤26 dBm (SRRC)
  Hover Accuracy Range                          Vertical: ±0.1 m (With Vision Positioning); ±0.5 m (With GPS Positioning)
  Horizontal: ±0.3 m (With Vision Positioning); ±1.5 m (With GPS Positioning)

• Gimbal
  Controllable Range Pitch: -90° to +30°

• Vision System
  Velocity Range ≤31 mph (50 kph) at 6.6 ft (2 m) above ground
  Altitude Range 0 – 33 ft (0 – 10 m)
  Operating Range 0 – 33 ft (0 – 10 m)
  Obstacle Sensory Range 2 – 98 ft (0.7 – 30 m)
  Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux)

• Infrared Sensing System
  Obstacle Sensory Range 0.6 – 23 ft (0.2 – 7 m)
  Operating Environment Surface with diffuse reflection material, and reflectivity > 8% (such as wall, trees, humans, etc.)

Camera

• Sensor 1’’ CMOS; Effective pixels: 20M

• Lens FOV (Field of View) 84°, 8.8 mm (35 mm format equivalent: 24 mm), f/2.8 – f/11, auto focus at 1 m – ∞

• ISO Range Video: 100 – 3200 (Auto); 100 – 6400 (Manual); Photo: 100 – 3200 (Auto); 100 – 12800 (Manual)

• Mechanical Shutter 8 – 1/2000 s

• Electronic Shutter 8 – 1/8000 s

• Max Image Size 3:2 Aspect Ratio: 5472×3648; 4:3 Aspect Ratio: 4864×3648; 16:9 Aspect Ratio: 5472×3078

• Still Photography Modes Single Shot
  Burst Shooting: 3/5/7/10/14 frames
  Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV Bias
  Interval: 2/3/5/7/10/15/30/60 s

• Video Recording Modes

  • H.265
    ● C4K: 4096×2160 24/25/30p
    ● 4K: 3840×2160 24/25/30p
    ● 2.7K: 2720×1530 24/25/3 0/48/50/60p
    ● FHD: 1920×1080 24/25/30/48/50/60/120p
    ● HD: 1280×720 24/25/30/48/50/60/120p

  • H.264
    ● C4K: 4096×2160 24/25/30/48/50/60p
    ● 4K: 3840×2160 24/25/30/48/50/60p
    ● 2.7K: 2720×1530 24/25/30/48/50/60p
    ● FHD: 1920×1080 24/25/30/48/50/60/120p
    ● HD: 1280×720 24/25/30/48/50/60/120p

• Video Storage Bitrate 100 Mbps

• Supported File Systems FAT32 (≤ 32 GB); exFAT (> 32 GB)

• Photo JPEG, RAW (DNG), JPEG + RAW

• Video MP4/MOV (AVC/H.264; HEVC/H.265)

• Supported SD Cards Micro SD, Max Capacity: 128 GB. Class 10 or UHS-1 rating required

• Operating Temperature 32° to 104° F (0° to 40° C)

Remote Controller

• Operating Frequency 2.400 – 2.483 GHz and 5.725 – 5.850 GHz

• Max Transmission Distance 2.4 GHz: 10 km (FCC); 6 km (CE); 6 km (SRRC)
  (Unobstructed, free of interference) 5.8 GHz: 10 km (FCC); 6 km (CE); 6 km (SRRC)

• Operating Temperature 32° – 104° F (0° – 40° C)

• Battery 6000 mAh LiPo 2S

• Transmitter Power (EIRP) 2.4 GHz: ≤26 dBm (FCC); ≤20 dBm (CE); ≤20 dBm (SRRC)
  5.8 GHz: ≤26 dBm (FCC); ≤14 dBm (CE); ≤20 dBm (SRRC)

• Operating Voltage 1.2 A @ 7.4 V

• Built-in Display Device 5.5 inch screen, 1920×1080, 1000 cd/m2
  Android system, 4G RAM + 16G ROM

Charger

• Voltage 17.4 V
• Rated Power 100 W

Intelligent Flight Battery (PH4-5870mAh-15.2V)

• Capacity 5870 mAh
• Voltage 15.2 V
• Battery Type LiPo 4S
• Energy 89.2 Wh
• Net Weight 468 g
• Charging Temperature Range 41° to 104° F (5° to 40° C)
• Max Charging Power 100 W

For more information, read the User Manual:
http://www.dji.com/phantom-4-pro-v2
※ This content is subject to change without prior notice.
PHANTOM is a trademark of DJI.
Copyright © 2021 DJI All Rights Reserved.

DJI incorporates HDMITM technology.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>