Shenzhen Sailangde Technology P04 Live Broadcast Selfie Stick Instructions
- June 6, 2024
- Shenzhen Sailangde Technology
Table of Contents
SELFIE STICK
Instructions
HOW TO USE
- Startup: press and hold the camera button for 3 seconds to start the machine, and the indicator Bashes to enter the search state.
- Bluetooth connection: open the mobile phone Bluetooth search “VP’ and click the connection. After the connection is successful, the indicator light goes out
- Photographing: when the remote control is connected with the mobile phone, dick the photographing button, the indicator Bashes and takes pictures.
- Shutdown without connection: when the remote control is in the state of no connection and no operation, it will automatically shut down for about 5 minutes.
- Connected shutdown: when the remote control is connected with the mobile phone, it will enter the sleep state without operation for about 10 minutes, and then automatically shut down without operation for about 10
- Sleep: after entering the sleep state, press the photo key to connect the mobile phone.
- Shutdown: in the power on and sleep state, long-press the photo key for 3 seconds, the indicator Bashes off and shuts down.
- Back connection function: the remote control has a memory connection function. When the mobile phone Bluetooth is turned on, the remote control will automatically connect the matched mobile phone.
Remove The Self Timer
Pull out the remote control from the side recess
How To Replace The Battery
Push the battery back cover to open the remote control cover.
Clip can rotation
Flip freely and shoot horizontally and vertically to take photos from multiple angles, which is freer to take photos
How to open quadruped
Open it outward at the position of the handle to change to quadruped mode
Quadruped
When the self-timer lever changes to the quadruped mode, pay attention to pulling out the last section of the lever and adjusting it until the quadruped is stable.
Product parameters
Width of holding mobile phone: 65-90mm Supported mobile phone size: 4.7-7
inches
Remote control parameters
Button battery: Battery model: cr1620 button
battery (replaceable – as shown in Figure 2)
Battery voltage: 3V
Battery capacity: 70mAh
Bluetooth version: 5.2
Bluetooth Name: VIP
The solution to the case of failure of remote control to connect to mobile
phone
- Turn on the Bluetooth of the mobile phone and dear some pairedEquipment
- Turn off and restart the phone.
- Turn off and restart the Bluetooth remote control.
- Turn on the Bluetooth connection again.
- Turn on the mobile phone Bluetooth turn on the remote control, and search the mobile phone interface when you get the VII? Click Connect and the interface displays “connecting”When “connect / pair”, press the remote control button continuously and quickly, that it can be connected normally ( Excitation is only required for the first connection live, automatic connection in the future, normal use)
For Android phones, press the remote control to add a sound solution to the problem of quantity/focus adjustment and/or no response.
- Open the camera to enter the photographing interface.
- Swipe left or find the camera settings.
- Click the volume key function.
- Set the volume key function to shutter (do not select zoom or zoom)Focus).
- The setting path of the individual mobile cameras is different please find it yourself
This remote control only supports the video recording function of the mobile camera and does not support the video recording function of the live app.
Operation method:
- Connect the Bluetooth remote control to the mobile phone
- Enter the camera on the mobile phone or download other camera App software
- Switch to the video interface
- Click the remote control button to record the video
- Click the button again to end the video recording
Operating mode:
- Remote control, effective distance 10m
- Quadruped mode
- Handheld mode
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>