SONOFF IFAN02 Ceiling Fan Controller User Guide

: June 6, 2024
: SonOFF

Table of Contents

Download the “eWeLink” app.
Wiring instruction
Add device
APP features
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sonoff iFan02 User Guide
Hi, welcome to use Sonoff iFan02 ceiling fan with LED light driver! By replacing the old driver of your LED ceiling fan with iFan02, you can remote turn on/off the fan and the light, change the fan speed.

Download the “eWeLink” app.

Search “eWeLink” in App Store for iOS version or Google play for Android version.

Wiring instruction

Replace the original driver in your LED ceiling fan with iFan02.

Add device

After finishing the wiring connection, power up your device
There are two ways to enter into pairing mode:
2.1 Press and hold the pairing button on iFan02 for 7 seconds until you hear the iFan02 makes 3 beep sounds in a row: beep, beep, beep beep, beep, beep beep, beep, beep
2.2 Install the battery into the 2.4G RF Remote with a slotted screwdriver. Then press and hold the app pairing button for 7s until you hear the iFan02 makes 3 beep sounds in a row: beep, beep, beep beep, beep, beep beep, beep, beep …
Open eWeLink app, click the “+” icon. Then select the Quick Pairing Mode (TOUCH), click Next.
The App will auto-search the device.
It will auto-select your home SSID, enter the password:
4.1 If no password, keep it blank.
4.2 Now eWeLink only supports 2.4G WiFi communication protocol, 5G-WiFi is not supported. If you are using a dual-band router, please disable 5G, allow 2.4G WiFi only.
Next, the device will be registered by link, and adding it to your accountant may take 1-3 minutes.
Name the device to complete.
Maybe the device is “Offline” on eWeLink, for the device needs 1 minute to connect to your router and server. When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-open.

APP features

Remote control the fan and light
You can control the fan and light separately from the device list or from the device’s interface. Once turning on/off the fan, the iFan02 driver will make a beep sound.
Change the fan speed There are 4 fan speed levels: 1/2/3/smart.
Share Control
The owner can share the devices with other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.
How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, write down a note to let the other person know who you are, then click Next. The other account will receive an invitation message. Click Accept, the device has been shared successfully. The other user will have access to control the device.
Timing (For the Light Only)
Support totally 8 enabled scheduled/countdown timing tasks for each device.
Note that the timing feature is only available for controlling the light.

6. Set default power-on state

Set default power-on state

In Device Setting, you can set the default device status: ON or OFF when the device is powered on.

Scene/Smart Scene Scene allows triggering on/off your fan or light automatically. Note that only the device owner can create scenes. Scenes can’t be shared. You can set up scenes or smart scenes to trigger on/off the device. Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.

4. Control with 2.4G RF Remote Indoors
First, you’ll need to install the battery. You will need a slotted screwdriver to open the battery cover on the Remote’s back. You can use RF Remote to control the fan and light, change the fan speed(1/2/3), close the buzzer if you don’t want to hear the beep sound of every operation.
5. Problems and solutions
Read the detailed FAQ on Itead Smart Home Forum. If the FAQ answers can’t solve your problem, please submit feedback on the eWeLink App.