iHOME IH-BW246 Smart WiFi LED Bulb User Guide
- June 6, 2024
- iHome
Table of Contents
S TA RT
G UUIIDDE
SMART WI-FI LED BULB
VOICE CONTROL GUIDE
Thank you for purchasing your iHOME smart home product. Make sure your devices
are already set up using the Geeni app, then follow these steps.
Name and Control Each Device by Voice
STEP 1
Download the Geeni app from App Store or Google Play.
|
---|---
https://apps.apple.com/us/app/geeni/id1177386276|
<https://play.google.com/store/apps/details?id=com.merkuryinnovations.geeni> Register an account on your Geeni App.
Enter your mobile phone number or email address- Enter the verification code and create a password.
- Log in to the App.
STEP 2
Plug-In
Screw in the bulb and turn on the power. The bulb should be quickly flashing
2x per second. *see reset instructions on p. 4
STEP 3
Add device:
Auto Discover Device
Your device is now able to be discovered magically to connect to your home Wi-
Fi network. It’s quicker and easier than ever to connect.
-
Make sure:
-
While the device is flashing, press in the Geeni app.
-
The Geeni app will automatically detect your device using its wireless Bluetooth connection. Tap “Add Now”.
-
The Geeni app will automatically detect the network that your smartphone is connected to.
Enter the password to your Wi-Fi network, then tap “Next Step” and the device will connect. -
The Geeni app will try to connect your device.
NOTE: Geeni can’t connect to 5GHz networks.
*If the connection fails, try to connect using AP Mode.
-
Follow the instructions to choose the device from your Wi-Fi list.
-
The device will connect.
NOTE: Geeni can’t connect to 5GHz networks.
*How do I reset the device and what does the blinking light mean?
Reset the bulb by turning it off and on three times.
• Reset once (off and on 3 times) to reach Easy Mode, which is the primary way
the app will try to connect. (When in Easy Mode, you’ll see the bulb flashing
quickly, 2x per second)
• Reset again (off and on 3 times) to reach AP Mode, which is the Backup Mode
to help connect. (When in AP Mode, you’ll see the bulb blinking slowly, every
3 seconds)
Frequently Asked Questions
Can I share with family and friends?
Yes, you can share your bulbs with family and friends who will have access to
control your bulbs, plugs, cameras, and other iHome devices. In the Geeni app,
press the Profile button and click on the “Device Sharing” button, and you
will be able to give or revoke sharing permissions.
In order to share, the other user should already have downloaded the Geeni app
and registered a new account.
Can I group multiple iHome devices together?
Yes, you can group multiple devices of the same type together, by room,
location, or however else you want. The same devices can be in multiple
groups. (For example, create
a group for “Bedroom” and another group for “Entire House”, and your Bedroom
lights can be included in both groups).
From your main device list, click on one of the devices you want to group.
Press the “•••” button on the top right for advanced settings, and click
Create Group. You’ll then be able to choose which devices you’d like to group
together and will be able to rename them.
How Many Devices Can I Control?
Geeni app can control an unlimited amount of devices in an unlimited amount of
locations. Your router may have a limit of how many devices can be connected
to one router.
My iHome device has a funny name. How do I rename it?
From your main device list, click on one of the devices you want to rename,
press the “•••” button on the top right for advanced settings, and click
Modify Device Name (or Modify
Group Name, if applicable). You’ll then be able to choose a more familiar
name.
The bulb appears offline or unreachable, what should I do?
Check the light switch and make sure that it’s switched ON.
The light bulb requires an “always-on” power supply to operate properly. Make
sure your Wi-Fi router is online and in range. Make sure you have the latest
Geeni functionality by clicking “Check for firmware update” in your device
settings.
What’s the Wireless Range?
The range of your home Wi-Fi is heavily dependent on your home router and the
conditions of the room. Check with your router specifications for exact range
data.
If my Wi-Fi/Internet goes down, will Geeni still work?
iHome products need to be connected to Wi-Fi in order to use them remotely.
Troubleshooting
Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check
whether there are any Internet connection problems. If the Wi-Fi signal is too
weak, reset your Wi-Fi router and try again.
Reset the device
Reset once (off and on 3 times) to reach Easy Mode, which is the primary way
the app will try to connect. (When in Easy
Mode, you’ll see the bulb flashing quickly, 2x per second)
Reset again (off and on 3 times) to reach AP, which is the Backup Mode to help
connect. (When in AP Mode, you’ll see the bulb blinking slowly, every 3
seconds)
System Requirements
9 or higher or Android™ 5.0 or higher
Existing Wi-Fi Network
Existing light socket (E26 base)
Mobile device running iOS®
Technical Specifications
E26 base
120 V, 60 Hz
Wi-Fi: IEEE 802.11n, 2.4GHz (not compatible with 5GHz Wi-Fi networks)
To control your iHOME smart bulbs, plugs or surge protectors, just say “OK
Google,“ or “Hey Google,“ and ask. Make sure your devices are already set up
using the Geeni
app.
*Things you can say:**
*Some commands require compatible devices.
01
Open the Google Home app and go to Home Control in the menu.
02
Tap the “+“ button.
03
Choose “Geeni“ from the list of Home Control partners.
04
Authorize your account with Google Assistant using the username and password
from your Geeni app. 
Now your Google Home app and iHOME devices are linked!
You’re now able to say “Hey Google“ and control your iHOME devices.
At any time, go into the “Home Control“ section of the Google Home app to set nicknames and rooms for your devices. You can rename your devices in the Geeni app, and Google Assistant will refer to them by the same name.
So if you rename a smart bulb to “Living Room“ or a nickname like “Blossom,“ then Google Assistant will use that same name later on. You can always give it a nickname using the Google Home app as well. You can also assign bulbs to a specific room, like “Bedroom“ or “Kitchen.“
Google Assistant will be able to control devices by room.
To control your iHOME smart bulbs, plugs, or surge protectors, just ask Alexa.
Make sure your devices are already set up using the Geeni app.
*Things you can say:**
*Some commands require compatible devices.
01
Open the Alexa app and go to Skills in the menu.
02
Search for Geeni then tap Enable.
Important Information:
Before installing or replacing a bulb, read and follow all precautions,
including the following:
CAUTION: SUITABLE FOR DAMP LOCATIONS. Do not install the device with wet hands
or when standing on wet or damp surfaces. Suitable for use in operating
environment between -20°C and 40°C (-4°F and 104°F). Not for use in totally
enclosed luminaires. Do not use with dimmers. Please make sure the voltage of
the LED bulb is compatible with the main electricity of your country before
connecting to a bulb holder. Ensure that the base of the bulb matches the bulb
holder. This device uses a non-replaceable light source. When the light source
reaches the end of its life cycle, the device should be replaced. This device
is not intended for use with emergency exit fixtures or emergency exit lights.
Support:
If you encounter any issues, please contact us at support.mygeeni.com for
help.
To explore our full selection of products, visit us at:
www.mygeeni.com
888-232-3143 Toll-free (English Only)
© 2021 Merkury Innovations
• 45 Broadway 3rd FL, New York NY 10006.
The illustrated product and specifications may differ slightly from those
supplied. iHome is a registered trademark of SDI Technologies Inc., used under
license. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple, and
the Apple logo are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc. Google, Google Play, and
related marks and logos are trademarks of Google LLC. iOS is a registered
trademark of Cisco in the U.S. and other countries and is used under license.
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its
affiliates. All other trademarks and trade names are those of their respective
owners.
Made in China
03
Authorize your account with Smart Home Skills using the username and password
from your Geeni app.
04
Choose “Discover Devices.“ After a few seconds your iHOME devices will be
displayed under Smart Home in the Alexa app.
You can rename your devices in the Geeni app, and Alexa will refer to them by
the same name.
So if you rename a smart bulb to “Living Room“ or a nickname like “Blossom,“
then Alexa will use that same name later on.
Alternatively, you can create an Alexa group, like “Bedroom“ or “Downstairs,“
and add the device to the group.
Alexa will recognize the group name in the Alexa app, or the device name in
the Geeni app.
More information is available at: http://tinyurl.com/alexa-smart-home-
groups
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
START GUIDE
What’s in the Box
Thank you for purchasing your home smart home product, powered by Geeni.
Get started using your new devices by downloading
Geeni is one convenient app that manages everything straight from your phone
or tablet. Easily connect to your home Wi-Fi, and control multiple devices
from the touch of your fingertips.
FCC Notice:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
Can’t connect?
Need help?
WE
CAN
HELP
DO NOT
RETURN THIS
PRODUCT TO
THE STORE
support.mygeeni.com
(888)232-3143 Toll-free or tap ‘support‘ for help in the Geeni app.