ADA INSTRUMENTS А00507 Topliner 3-360 Green Line Laser User Manual
- June 6, 2024
- ADA INSTRUMENTS
Table of Contents
ADA INSTRUMENTS А00507 Topliner 3-360 Green Line Laser
TOPLINER 3-360 GREEN
Line Laser
THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES (NOT HAVING AN IMPACT ON
THE SPECIFICATIONS) TO THE DESIGN, COMPLETE SET WITHOUT GIVING PRIOR WARNING.
APPLICATION
Line laser ADA TOPLINER 3-360 GREEN is designed to check the horizontal and vertical position of the surfaces of the elements of building structures and also to transfer the angle of inclination of the structural part to similar parts during construction and installation works.
SPECIFICATIONS
- Laser beam …………………………………….2V1H (360° laser)
- Light sources…………………………………..532 nm
- Laser safety class……………………………Class 2, <1mW
- Accuracy ………………………………………..±3 mm/10 m
- Self-leveling range………………………….±4.5°
- Working range (with detector)………40m (70m)
- Rotation/Fine adjustment …………….360 °/ ±10° (with rotation base)
- Power supply………………………………….Li-ion accumulator
- Service time …………………………………..approx 5-8 h with all lines ON
- Mounting thread …………………………..1/4 ″ and 5/8 ″
- Operating temperature………………. -10°C ~ +40°C
- Weight …………………………………………..0.9 kg
FUNCTIONAL DESCRIPTION
Emitting a horizontal and two vertical laser line. Quick self-leveling: when line accuracy is out of the range the laser line flashes and the warning sound is produced. Compensator locking system for safe transportation. Intermediate compensator locking system for slope operation. Indoor and outdoor performance function.
FEATURES
- Keypad
- Jack for charger
- Battery compartment
- Rotating base
- Lock switch (ON/X/OFF)
- Vertical laser window
- Horizontal laser window
BUTTON PANEL
- Tilt LED. Indicator lights up in the intermediate position of the compensator lock.
- Detector LED. Indicator lights up when press Detector button.
- Power LED. Indicator lights up when power is on. Indicator blinks when power is low.
- Horizontal switch (H)
- Detector switch
ASSEMBLAGE OF THE ROTATING BASE
- Remove the instrument from the base.
- Place the instrument on the base.
INSERT THE BATTERY
- Use standard Li-battery only.
- Pay attention to the polarity.
- Insert the battery.
- Cover the battery cover.
MOUNTING THREAD
It is possible to place the instrument on the tripod or wall mount during operation. For attachement use thread 1/4” at the bottom part of the instrument or thread 5/8” at the bootom part of the rotating base.
LOCK SWITCH
Lock switch has tree positions:
- OFF mode Power is OFF. Pendulum is locked. Button panel can not be used.
- Tilt mode. Power is ON. Pendulum is locked. Button panel can be used. Vertical lines and horizontal line can be switched on/off.
- ON mode.Power is on. Pendulum is unlocked. Self-leveling. Button panel can be used. Vertical lines and horizontal line can be switched on/off. Detector mode.
POWER WARNING
Power LED flashes when the power is full. Maximum operating time with all
laser beams is about 30 min. All laser beams and LED will be shut off when the
power is very low. Please use the standard charger to charge the instrument.
CHARGER LED
The LED of the charger will be yellow when it’s charging. When power is full,
the indicator changes into green light. The Charger should be 5V 1A . The
instrument can be used while charging.
TILT MODE WARNING
The instrument can work in the tilt mode (intermediate position of lock
switch). Tilt LED flashes. Pendulum is locked. Laser lines are projected at
any angle. For example, when making stairs.
DETECTOR MODE
Use the detector mode in bright light when laser beam is not visible. Press
button to switch on the dector mode. Upper LED flashes. Place the detector to
the the place of beam location. Follow the instruction of detector usage when
searching the beam.
OUT OF LEVELING WARNING
All the laser beams will be shut off when the instrument is out of leveling
range. The buzzer will alarm at the same time.
TRANSPORTATION
Please turn the lock switch in OFF mode. Please put the instrument on the
correct position in soft bag or case. Dot not drop it during transportation.
ROTATING BASE
Part A can rotate around part B by 360°. In leveling mode, by using adjusting knob , the line laser can rotatearound the down dot by ± 10°.
APPLICATION OF THE DETECTOR
This line laser generates visible laser beam allowing to make the following
measurements: Height measurement, calibration of horizontal and vertical
planes, right angles, vertical position of installations, etc. The line laser
is used for indoor performance to set zero marks, for marking out of bracing,
installation of tingles, panel guides, tiling, etc. Laser device is often used
for marking out in the process of furniture, shelf or mirror installation,
etc. Laser device may be used for outdoor performance at distance within its
operation range.
TO CHECK THE ACCURACY OF LINE LASER (SLOPE OF PLANE)
Place the line laser on the tripod 5m away from the wall so the horizontal
laser line will be directed to the wall. Switch on the power. The instrument
starts to self-level. Mark point A on the wall to show the contact of laser
beam with the wall. Turn the instrument by 90° and mark points В, С, D on the
wall. Measure distance “h” between the highest and lowest points (these are A
and D points in the picture).If “h”is ≤ 6 mm, the measurement accuracy is
good. If “h” exceeds 6 mm, apply service center.
TO CHECK PLUMB
Choose a wall and set laser 5 m away from the wall. Hang a plumb with the
length 2.5 m on the wall. Turn on the laser and make the vertical laser line
meet the point of the plumb. The accuracy of the line is in the range if the
vertical line doesn’t exceed (up or down) the accuracy that is shown in the
specifications (e.g. ±3 mm/10 m). If the accuracy isn’t corresponding with
claimed accuracy, contact the authorized service center.
PRODUCT LIFE
Product life of the tool is 7 years. The battery and the tool should never be
placed in municipal waste. Date of production, manufacturer’s contact
information, country of origin are indicated on the product sticker.
CARE AND CLEANING
Please handle line laser with care. Clean with soft cloth only after any use.
If necessary damp cloth with some water. If instrument is wet clean and dry it
carefully. Pack it up only if it is perfectly dry. Transport in original
container/case only.
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
- Measurements through glass or plastic windows;
- Dirty laser emitting window;
- After line laser has been dropped or hit. Please check the accuracy;
- Large fluctuation of temperature: if instrument will beused in cold areas after it has been stored in warm areas (or the other way round) please wait some minutes before carrying out measurements.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
- It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation systems);
- will be disturbed by other instruments (e.g. intensive electromagnet-ic radiation nearby industrial facilities or radio transmitters).
LASER CLASS 2 WARNING LABELS ON THE LASER INSTRUMENT
LASER CLASSIFICATION
The instrument is a laser class 2 laser product accortding to DIN IEC
60825-1:2014. It is allowed to use unit without further safety precautions.
Note: Because of construction of laser emitter laser beam may be unho-
mogeneous and has different intensity of brightness along the perimeter in
different light conditions. Unhomogeneous of laser beam: laser patch of light
but the center of laser beam is identified. Different laser beam brightness:
difference of intensity is up to 50%.
SAFETY INSTRUCTIONS
- Please follow up instructions given in operators’ manual.
- Do not stare into beam. Laser beam can lead to eye injury (even from greater distances).
- Do not aim laser beam at persons or animals. The laser plane should be set up above eye level of persons. Use the instrument for measuring jobs only.
- Do not open instrument housing. Repairs should be carried out by au-thorized workshops only. Please contact your local dealer.
- Do not remove warning labels or safety instructions.
- Keep instrument away from children.
- Do not use instrument in explosive environment.
WARRANTY
This product is warranted by the manufacturer to the original purchaser to be free from defects in material and workmanship under normal use for a period of two (2) years from the date of purchase. During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same or similar model at manufactures option), without charge for either parts of labour. In case of a defect please contact the dealer where you originally purchased this product. The warranty will not apply to this product if it has been misused, abused or altered. Without limiting the foregoing, leakage of the battery, bending or dropping the unit are presumed to be defects resulting from misuse or abuse.
EXCEPTIONS FROM RESPONSIBILITY
The user of this product is expected to follow the instructions given in
operators’ manual. Although all instruments left our warehouse in perfect
condition and adjustment the user is expected to carry out periodic checks of
the product’s accuracy and general performance.
The manufacturer, or its representatives, assumes no responsibility of results
of a faulty or intentional usage or misuse including any direct, indirect,
conse-quential damage, and loss of profits. The manufacturer, or its
representatives, assumes no responsibility for consequential damage, and loss
of profits by any disaster (earthquake, storm, flood …), fire, accident, or an
act of a third party and/or a usage in other than usual conditions.
The manufacturer, or its representatives, assumes no responsibility for any
damage, and loss of profits due to a change of data, loss of data and
interrup-tion of business etc., caused by using the product or an unusable
product. The manufacturer, or its representatives, assumes no responsibility
for any damage, and loss of profits caused by usage other thsn explained in
the users’ manual. The manufacturer, or its representatives, assumes no
responsibility for damage caused by wrong movement or action due to connecting
with other products.
WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:
- If the standard or serial product number will be changed, erased, re-moved or wil be unreadable.
- Periodic maintenance, repair or changing parts as a result of their nor-mal runout.
- All adaptations and modifications with the purpose of improvement and expansion of normal sphere of product application, mentioned in the service instruction, without tentative written agreement of the expert pro-vider.
- Service by anyone other than an authorized service center.
- Damage to products or parts caused by misuse, including, without lim-itation, misapplication or nrgligence of the terms of service instruction.
- Power supply units, chargers, accessories, wearing parts.
- Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, presence of any liquids and foreign objects inside the product.
- Acts of God and/or actions of third persons.
- In case of unwarranted repair till the end of warranty period because of damages during the operation of the product, it’s transportation and storing, warranty doesn’t resume.
WARRANTY CARD
Name and model of the product __
Serial number_Date of sale__
Name of commercial organization ____
stamp of commercial organization
Warranty period for the instrument explotation is 24 months after the date of
original retail purchase.
During this warranty period the owner of the product has the right for free
repair of his instrument in case of manufacturing defects.
Warranty is valid only with original warranty card, fully and clear filled
(stamp or mark of thr seller is obligatory).
Technical examination of instruments for fault identification which is un-der
the warranty, is made only in the authorized service center.
In no event shall manufacturer be liable before the client for direct or
consequential damages, loss of profit or any other damage which occurs in the
result of the instrument outage.
The product is received in the state of operability, without any visible
damages, in full completeness. It is tested in my presence. I have no
complaints to the product quality. I am familiar with the conditions of
qarranty service and i agree.
purchaser signature _____
Before operating you should read service instruction!
If you have any questions about the warranty service and technical support
contact seller of this product
ADA International Group Ltd., No.6 Building, Hanjiang West Road #128,
Changzhou New District, Jiangsu, China
Made In China
adainstruments.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>