ADA INSTRUMENTS А00560 Cube 3-360 Green Line Laser User Manual

OPERATING MANUAL

CUBE 3-360 GREEN
Line Laser

Manufacturer: Adainstruments

Address: www.adainstruments.com

THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES (NOT HAVING AN IMPACT ON THE SPECIFICATIONS) TO THE DESIGN, COMPLETE SET WITHOUT GIVING PRIOR WARNING.

APPLICATION

Line laser ADA CUBE 3-360 Green is designed to check the horizontal and vertical position of the surfaces of the elements of building structures and also to transfer the angle of inclination of the structural part to similar parts during construction and installation works.

SPECIFICATIONS

Laser beam …………………………………………….. Horizontal line 360°/2 vertical lines 360
Light sources …………………………………………. 3 laser diodes with laser emission wavelength of 515 nm
Laser safety class …………………………………… Class 2, <1mW
Accuracy ………………………………………………….. ±3mm/10m
Self-leveling range ………………………………….. ±4°
Operating range with/without receiver …… 230/130 ft (70/40 m)
Power source ………………………………………….. Li-ion battery 3.7 V / 3xAA 1,5V
Tripod thread ………………………………………….. 2×1/4”
Operating temperature ………………………… -5°C +45°C
Weight ……………………………………………………… 1,01 lb (460 g)

*depends on illumination

FUNCTIONAL DESCRIPTION

1. 360° horizontal line and 2 vertical laser lines 360°.

2. Quick self-leveling: when line accuracy is out of the range the laser
   line flashes and the warning sound is produced.

3. Compensator locking system for safe transportation.

4. Intermediate compensator locking system for slope operation.

5. Indoor and outdoor performance function.

LASER LINES

FEATURES

1. A vertical laser beam (V) / Horizontal laser beam (H)
2. Detector mode
3. Battery compartment
4. Tripod mount 1/4’’
5. Compensator switch (ON/X/OFF)
6. Vertical laser window
7. Horizontal laser window
8. Power socket

SAFETY INSTRUCTIONS

• Please follow up on the instructions given in the operating manual.
• Do not stare into the beam. The laser beam can lead to an eye injury (even from greater distances).
• Do not aim the laser beam at persons or animals.
• The laser plane should be set up so that the beam path is not at normal eye level.
• Use the instrument for measuring jobs only.
• Do not open instrument housing. Repairs should be carried out by authorized workshops only. Please contact your local dealer.
• Do not remove warning labels or safety instructions.
• Keep instruments away from children.
• Do not use instruments in an explosive environment.

OPERATION

Cube 3-360 Green is a reliable and convenient line laser. It will be an irreplaceable instrument for many years.

1. Before use, remove the battery compartment cover. Insert three batteries into the battery compartment with proper polarity, then put the cover back.
   WARNING: Never use a charger for ordinary batteries. Do not leave the instrument unattended while using the charger. Parameters of the charger must correspond to the parameters of domestic electricity.
   Output voltage must be no more than 5V.

2. Set the compensator locking grip (5) into the ON position. The horizontal beam is ON.
   If the switch is ON, that means the power is on and the compensator is working.
   If the switch (5) is in an intermediate position, that means the power is opened, the compensation is still locked, but it will not warn if you issue the slope. It’s the hand-mode. If the switch (5) is OFF, that means that the instrument is off, the compensator is also locked.

3. Press button (1) to switch the vertical and horizontal beams on. Press button (1) once again to switch 2 vertical beams son. Press button (1) to switch the horizontal and vertical beams on. Switch on only necessary laser lines in order to save battery life.

4. Press button (2). The mode “outside” is activated. Press button (2) once again. The tool begins to operate in “inside” mode. Use the detector of the laser beam for this model. See the operating manual for the operation with the detector.

TO CHECK THE ACCURACY

TO CHECK THE ACCURACY OF LINE LASER (SLOPE OF PLANE)
Place line laser on the tripod 5m away from the wall so the horizontal laser line will be directed to the wall. Switch on the power. The instrument starts to self-level. Mark point A on the wall to show the contact of the laser beam with the wall. Turn the instrument by 90° and mark points В, С, D on the wall. Measure distance “h” between the highest and lowest points (these are A and D points in the picture). If “h” is ≤ 6 mm, the measurement accuracy is good. If “h” exceeds 6 mm, apply service center.

TO CHECK PLUMB

Choose a wall and set line laser 5m away from the wall. Mark point A on the wall, please note the distance from point A to ground should be 3m. Hang a plumb line from A point to the ground and find a plumb point B on the ground. turn on the laser and make the vertical laser line meet point B, along the vertical laser line on the wall and measure the distance 3m from point B to another point C. Point C must be on the vertical laser line, it means the height of C point is 3m.

Measure the distance from point A to point C, if the distance is over 2 mm, please, contact the seller to calibrate the laser.

PRODUCT LIFE
The product life of the tool is 7 years. The battery and the tool should never be placed in municipal waste. Date of production, manufacturer’s contact information, country of origin are indicated on the product sticker.

CARE AND CLEANING

Please handle line laser with care. Clean with a soft cloth only after any use.
If necessary damp cloth with some water. If the instrument is wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in original container/case only.

Note: During transport On/Off compensator lock (5) must be set to position “OFF”. Disregard may lead to damage of compensator.

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

• Measurements through glass or plastic windows;
• Dirty laser emitting window;
• After the instrument has been dropped or hit. Please check the accuracy.
• Large fluctuation of temperature: if the instrument will be used in cold areas after it has been stored in warm areas (or the other way round) please wait some minutes before carrying out the measurements.

ELECTROMAGNETIC ACCEPTABILITY (EMC)

• It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation systems);
• will be disturbed by other instruments (e.g. intensive electromagnetic radiation nearby industrial facilities or radio transmitters).

LASER CLASS 2 WARNING LABELS ON THE LASER INSTRUMENT

LASER CLASSIFICATION

The instrument is a laser class 2 laser product according to DIN IEC 60825-1:2007. It is allowed to use the unit without further safety precautions.

WARRANTY

This product is warranted by the manufacturer to the original purchaser to be free from defects in material and workmanship under normal use for a period of two (2) years from the date of purchase.

During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same or similar model at manufactures option), without charge for either part of labor.

In case of a defect please contact the dealer where you originally pur­chased this product. The warranty will not apply to this product if it has been misused, abused or altered. Without limiting the foregoing, leakage of the battery, bending, or dropping the unit are presumed to be defects resulting from misuse or abuse.

EXCEPTIONS FROM RESPONSIBILITY

The user of this product is expected to follow the instructions given in the operating manual. Although all instruments left our warehouse in perfect condition and adjustment the user is expected to carry out periodic checks of the product’s accuracy and general performance.

The manufacturer, or Its representatives, assumes no responsibility of re­sults of a faulty or intentional usage or misuse including any direct, indi­rect, consequential damage, and loss of profits. The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits by any disaster (earthquake, storm, flood …), fire, accident, or an act of a third party and/or usage in other than usual conditions.

The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of data, loss of data and interruption of business, etc., caused by using the product or an unusable product. The manufacturer, or its representatives, assumes no response-ability for any damage, and loss of profits caused by usage other than explained in the operating manual.

The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or action due to connecting with other products.

WARRANTY DOESN’T EXTEND TO THE FOLLOWING GASES:

1. If the standard or serial product number will be changed, erased, removed, or will be unreadable.
2. Periodic maintenance, repair, or changing parts as a result of their normal runout.
3. All adaptations and modifications with the purpose of improvement and expansion of the normal sphere of product application are mentioned in the service instruction, without the tentative written agreement of the expert provider.
4. Service by anyone other than an authorized service center.
5. Damage to products or parts caused by misuse, including, without limitation, misapplication or negligence of the terms of service instruction.
6. Power supply units, chargers, accessories, wearing parts.
7. Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, presence of any liquids and foreign objects inside the product.
8. Acts of God and/or actions of third persons.
9. In case of unwarranted repair till the end of the warranty period because of damages during the operation of the product, it’s a transportation and storing, the warranty doesn’t resume.

ADA International Group Ltd., No.6 Building, Hanjiang West Road #128,
Changzhou New District, Jiangsu, China
Made In China
adainstruments.com

References

• ADA Instruments
• ADA Instruments

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>