ADA INSTRUMENTS A00139 6D Servoliner Line Laser User Manual

Operating manual
Line laser
6D SERVO LINEAR

Applications

Line laser ADA 6D Servoliner is designed to check the horizontal and vertical position of the surfaces of the elements of building structures and also to transfer the angle of inclination of the structural part to similar parts during construction and installation works.

Specifications

Laser beam: 4V4H1D
Light sources: 635nm/floor point 650nm
Laser safety class: 2
Accuracy: ±1mm/10m
Self-leveling range: ±3.5°
Working range (with detector): radius 40~50m
Sensitivity of circular level: 60’/2mm
Rotation/Fine adjustment: 360°
Power supply: 4 X AA batteries
Service time: approx 5~10 h with all lines ON
Mounting thread: 5/8″ х 11
Operating temperature: -10°C ~ +40°C
Weight: 1.35 kg
Size: Ø 150Х200 mm

Functional description

The horizontal and vertical are the separate button, it could make switches have a longer life span.
Can be used indoors or outdoor, when using outdoor, the receiver during the work can be used over 50m of radius.
An electronic compensator ensures more quick self-leveling.
When the line laser inclines over the incline alarm range, the laser line automatically gleams.
360° rotating fine adjustment mechanism makes it easier to find objects correctly.
When turning off the power, a built-in locking system can automatically lock the compensator to avoid vibration in the transportation.

Laser lines

Features

1. Switchboard
2. Vertical laser windows
3. Horizontal laser windows
4. Carrying belt
5. Fine adjustment switch
6. Battery cover
7. Leveling screw
8. Down point laser & mounting thread for tripod
9. Limb 360º
10. Connector for power unit

Keypad

1. Leveling function switch
2. Power LED
3. Detector switch
4. Leveling indication LED
5. Detector LED
6. Horizontal switch (H)
7. Vertical switch (V)
8. Power switch

Operation

1. Take out the battery lid. According to the sign “ + ,-”, insert four alkaline batteries or rechargeable batteries to the battery socket, then cover the battery lid.
2. Setting up the line laser on the floor or the tripod. When using a tripod, support the centering nut of the line laser with one hand and screw the centering screw into the centering nut female thread. Tighten the centering screw.
3.  When the buzzer sounds while turning on the line laser (at the same time the LED will blink), that means the line laser is over alarm range based on the ground, please adjust the three leveling screw or tripod.
4. Make the floor point of the line laser aim at an object on the floor, the line to aim at the object. And then move fine adjustment mechanism and move upper part of the line laser to roughly adjust vertically to find objects correctly.
5. When the line laser inclines over alarm range, because of certain reasons during the operation, the laser and the LED will blink and the buzzer sounds at the same time, the laser line gleams. This time, please adjust the three leveling screws to make the buzzer sound stop.

Slant/slope fine adjustment mode

1. After power on, pressing (1) for a little bit of time enter (or quit) “slant/slope fine adjustment mode”
2. Setting “slant fine adjustment [X axis]” for start point.
3. During the time of “slant fine adjustment [X axis]”, pressing H can be switched to “angle of slope in the horizontal plane” (left).
4. During the time of “slope fine adjustment [Y axis]”, pressing V can be switched to “slope of horizontal plane”
5. Bi-Bi sound mentions that you’ve reached the limit of slope position.

To check the accuracy of line laser
Set up the line laser between two walls, the distance is 5 m. Turn on the line laser and mark the point of the cross laser line on the wall.

Set up the line laser 0,5-0,7m away from the wall and make, as described above, the same marks. If the difference {a1-b2} and {b1-b2} is less then the value of “accuracy” (see specifications), there is no need in calibration.
For example: when you check the accuracy of line laser the difference is {a1-a2}=5 mm and {b1-b2}=7 mm. The instrument’s error: {b1-b2}-{a1-a2}=7-5=2 mm. Now you can compare this error with standard error.
If the accuracy of line laser isn’t corresponding with claimed accuracy, contact the authorized service center.

To check the accuracy of the horizontal beam
Choose a wall and set laser 5M away from the wall. Turn on the laser and the cross laser line is marked A on the wall. Find another point M on the horizontal line, the distance is around 2.5m. Swivel the laser, and another cross point of the cross laser line is marked B. Please note the distance of B to A should be 5m.
Measure the distance between M to cross laser line, if the difference is over 3mm, the laser is out of calibration, please contact with the seller to calibrate the laser.

To check plumb
Choose a wall and set laser 5m away from the wall. Mark point A on the wall, please note the distance from point A to ground should be 3m. Hang a plumb line from A point  to the ground and find a plumb point B on the ground. turn on the laser and make the vertical laser line meet point B, along the vertical laser line on the wall and measure the distance 3m from point B to another point C. Point C must be on the vertical laser line, it means the height of C point is 3m.
Measure the distance from point A to point C, if the distance is over 2 mm, please, contact with the seller to calibrate the laser.
Product life
The product life of the tool is 7 years. The battery and the tool should never be placed in municipal waste. Date of production, manufacturer’s contact information, country of origin are indicated on the product sticker.

Care and cleaning

Please handle measuring instruments with care. Clean with a soft cloth only after any use. If necessary damp cloth with some water.
If the instrument is wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in original container/case only.

Specific reasons for erroneous measuring results

• Measurements through glass or plastic windows;
• Dirty laser emitting window;
• After the instrument has been dropped or hit. Please check the accuracy.
• Large fluctuation of temperature: if the instrument will be used in cold areas after it has been stored in warm areas (or the other way round) please wait some minutes before carrying out measurements.

Electromagnetic acceptability (EMC)

• It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation systems);
• will be disturbed by other instruments (e.g. intensive electromagnetic radiation nearby industrial facilities or radio transmitters).

Laser class 2 warning labels on the laser instrument.

Laser classification

The tool is a laser class 2 laser product according to DIN IEC 60825-1:20014. It is allowed to use the unit without further safety precautions.

Safety instructions

• Please follow up on the instructions given in the operators’ manual.
• Do not stare into the beam. The laser beam can lead to an eye injury (even from greater distances).
• Do not aim the laser beam at persons or animals.
• The laser plane should be set up above the eye level of persons.
• Use the line laser for measuring jobs only.
• Do not open line laser housing. Repairs should be carried out by authorized workshops only. Please contact your local dealer.
• Do not remove warning labels or safety instructions.
• Keep line laser away from children.
• Do not use line laser in an explosive environment.

Warranty
This product is warranted by the manufacturer to the original purchaser to be free from defects in material and workmanship under normal use for a period of two (2) years from the date of purchase.
During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same or similar model at manufactures option), without charge for either part of labor.
In case of a defect please contact the dealer where you originally purchased this product. The warranty will not apply  to this product if it has been misused, abused or altered. Withiut limiting the foregoing, leakage of the battery, bending or dropping the unit are presumed to be defects resulting from misuse or abuse.

Exceptions from responsibility

The user of this product is expected to follow the instructions given in the operators’ manual.
Although all instruments left our warehouse in perfect condition and adjustment the user is expected to carry out periodic checks of the product’s accuracy and general performance.
The manufacturer, or its representatives, assumes no responsibility of the results of faulty or intentional usage or misuse including any direct, indirect, consequential damage, and loss of profits.
The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits by any disaster (earthquake, storm, flood …), fire, accident, or  an act of a third party and/or usage in other than usual conditions.
The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of data, loss of data and interruption of business, etc.,  caused by using the product or an unusable product.
The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused by usage other than explained in the users’ manual.
The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or action due to connecting with other products.

WARRANTY DOESN’T EXTEND TO THE FOLLOWING CASES:

1. If the standard or serial product number will be changed, erased, removed, or will be unreadable
2. Periodic maintenance, repair, or changing parts as a result of their normal runout.
3. All adaptations and modifications with the purpose of improvement and expansion of the normal sphere of product application, mentioned in the service instruction, without tentative written agreement of the expert provider.
4. Service by anyone other than an authorized service center.
5. Damage to products or parts caused by misuse, including, without limitation, misapplication or negligence of the terms of service instruction.
6. Power supply units, chargers, accessories, wearing parts.
7. Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, presence of any liquids and foreign objects inside the product.
8. Acts of God and/or actions of third persons.
9. In case of unwarranted repair till the end of the warranty period because of damages during the operation of the product, it’s a transportation and storing, the warranty doesn’t resume.

WARRANTY CARD

Name and model of the product ____
Serial number ____date of sale___

Name of commercial organization _____stamp of commercial organization

The warranty period for the instrument exploitation is 24 months after the date of the original retail purchase.
During this warranty period, the owner of the product has the right for free repair of his instrument in case of manufacturing defects.
Warranty is valid only with original warranty card, fully and clear filled (stamp or mark of thr seller is obligatory).
Technical examination of instruments for fault identification which is under the warranty is made only in the authorized service center.
In no event shall the manufacturer be liable before the client for direct or consequential damages, loss of profit or any other damage which occur in a result of the instrument outage.
The product is received in the state of operability, without any visible damages, in full completeness. It is tested in my presence. I have no complaints to the product quality. I am familiar with the conditions of warranty service and I agree.
purchaser signature ___

Before operating you should read service instruction!
If you have any questions about the warranty service and technical support contact the seller of this product

References

• ADA Instruments

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>