aEROCRAFT SM1703 Remote Control Quadcopter Instruction Manual
- June 6, 2024
- aEROCRAFT
Table of Contents
6 CH REMOTE CONTROL QUAD COPTER
AGES 14+
Drone Outdoors GPS Mode Operation Steps.
Fig 1,2,3
First. Turn on the drone first, then turn on the controller. Second. When the
drone is paired with controller, the drone will make a beep sound. Push the
left joystick up and down to make ksure the drone connects the controller
successfully.
Place the drone on a flat ground, press Geomagnetic correction button, the
controller will make a beep sound. Pick up the drone 10 cm from ground, turn
it clockwise three times until you head a beep sound from the controller. Then
invert the Blo: drone immediately to make the drone head down and turn it
clockwise three times again until the controller makes a beep sound. After
this process, place the drone back to flat ground. Fourth. The drone will
search GPS signals automatically on the ground. When the controller make a
beep sound, the GPS is on
GPS mode. Fifth. Hit unlock button to free the drone, propellers will spin
slowly. Sixth. The drone takes off slowly when the propellers spin. The player
can press speed button on the controller to switch three speeds
(Low/Medium/High). Start on low. Seventh. Go to |OS or Android App store to
download Official App provided by the manufacturer. Use your mobile to connect
the drone via WIFI. Open the App, you will be able to see live images in the
Phone. There is an APP user manual comes in the package.
Drone Indoors and Normal Mode Operation Steps.
First. Turn on the drone first, then turn on the controller. Second. When
the drone is paired with controller, the drone will make a beep sound. Push
the left joystick up and down to make sure the drone connects controller
successfully. Third. Press the GPS button on the controller, hit reset button
to reset the drone. Drone lights will flash for two seconds. After this
process, hit unlock button to free the drone, propellers will spin slowly.
Fourth. The drone takes off slowly when the propellers spin. The player can
press speed button on the controller to switch three speeds (Low/Medium/High).
Start on low. Fifth. Goto lOS android App store to download Official App
provided by the manufacturer. Use your mobile to connect the drone via WIFI.
Open the App, you will be able to see live images in the Phone. There is an
APP user manual comes in the package.
Package list
| Number | Name | Use |
|---|---|---|
| 1 | Adjust Camera | Adjust the Camera angle up |
| 2 | Surround Key | Hit the surrounding key,then push light joystick for 2 |
seconds, the drone will fly 360 degrees in the air.
3| LED| Switch the controller from OFF to ON. If the LED is solid on both the
controller and drone, then they are paired successfully.
4| Power| Turns the controller ON/OFF
5| Left joystick| Change altitude (go up and down) and rotation(turn left and
right)
6| Light joystick| Move forward,back, left, and right
7| Adjust Camera| Adjust the Camera angle down
8| One key return/Reset| 1. Short press this button, the drone will return
automatically under GPS mode.
2. Long press this button to reset the drone to original settings.
9| Geomanetic correction/Headless mode| 1. Short press to correct Geomagnetic
for searching GPS signal.
2. Long press to headless mode.
10| Unlock| Protect the drone before taking off, press this button to unlock
the drone.
11| GPS mode| Three is no GPS mode indoors, the player needs to press this
button to close GPS mode when flying the drone indoors.
12| Speed| Switch between three speeds(Low/Medium/High).Starts on low.
13| Mobile Phone holder.| Holds mobile phone while you fly drone.
Change and Charge the drone’s battery.
1.Push the OPEN button on tail of the drone
| 2. Hold the Open button, push backward drone. the battery module to remove
the battery.
---|---
3. Plug the battery into the USB cable in package to charge. LED will light
up when charging and turn off when battery is completely charged. Charging
time takes 120-160 minutes.
| 4.Put the battery back into a drone.
Caution: when the drone is not in use, disconnect the battery to avoid battery damage. Do not charge the battery with a power bank, use a computer or wall outlet instead.
BATTERY CHARGING WARNING
- Please use the original charger when charging the battery.
- Do not charge any batteries that are expanded leaking, or damaged in any way.
- Do not charge the battery if it is hot in any way.
- Don’t charge the battery on easily flammable material (Carpet, certain wood, etc)
- The battery temperature while charging should be between 32 and 104 Fahrenheit
LITHIUM ION BATTERY WARNING
- If the battery is leaking, avoid contact with your skin and eyes
- If it does touch your skin, use soap to wash it off immediately
- If it touches your eyes, wash your eyes out and see a doctor immediately
- ifthe charger has smoke coming out, smells, or makes a noise, unplug it immediately
RECYCLING LITHIUM-ION BATTERIE S
- Please do not dispose of ofthe battery in proper battery disposal centers, not in the trash
- Do not handle a broken battery with your bare hands.
| • Push the left joystick up, propellers speed increase, the drone rise.
• Push the left joystick down, propellers speed decrease, the drone fall.|
---|---|---
| • Push the left joystick to the left, the drone flight angle turns to the
left.
• Push the left joystick to the right, the drone flight angle turns to the
right.|
| • Push light joystick up, the drone flies forward.
• Push light joystick down, the drone flies back|
| • Push the left joystick to the left, the drone turns to the left.
• Push the left joystick to the right, the drone turns to the right.|
Fly Environment.
- Fly indoors: Please make sure there is plenty of space and on obstacles to crash into.
- Fly outdoors: Please fly the drone in breeze or windless weather.
Caution: Do not fly the drone during harsh weather conditions (Rain, Snow, High winds, etc). Flying in harsh weather will result in poor flight performance or trash the drone.
Common problems
| Common problems | Reasons | How to deal with |
|---|
Controller has no
power| 1. Did not turn the power| 1. Turn on the controller
2. Insert the battery in a wrong way| 2. Make sure insert batteries in
proper polarity which shows in the battery box.
3. Batteries are dead| 3. Change new batteries
The drone is not paired with a controller| 1. Did not turn on the controller|
1.Turn on the drone first. then turn on controller.
2. The drone batteries are not connected successfully| 2. Remove the battery
module and put it back into the drone again.
3. High wind fly condition| 3. Do not fly the drone during harsh conditions.
It might result to loss control of drone.
The drone is not raising in the air| 1. Propellers spin to slow speed.| 1.
Push left joystick up to increase the drone
2. The battery is low| 2. Charge battery completely.
The drone is landing to fast.| Push left joystick to hard while flying.| Push
left joystick slowly while flying.
Caution
- Before flying the drone, make sure to hit the reset button on the controller before each flight. This will recalibrate drone, which will allow optimal flight each time
- If Drone crashes, first, make sure that there is no damage to drone. Make sure the propellers are running properly. DONOT FLY JACK IF THE PROPELLERS WORKING PROPERLY AS THIS CAN CAUSE FURTHER DAMAGE. Next, hit the Reset button to recalibrate Jack to factory settings before flying again
- When Drone has an alow battery, it will have less power and it may be harder for it to take off. Drone’s lights will start blinking when his batteries are low.
- For you and other people? safety, do not let the drone crash in the air, When Drone is about to run out of battery, he will try to Autoland. Don’t fly too high with a low battery
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.