Moredig RCPL-001 Remote Control Musical Projection Lamp User Manual

Moredig RCPL-001 Remote Control Musical Projection Lamp User Manual

Product Features

The Remote Control Musical Projection Lamp is an upgrade version that projects the light and shadow of the stars, the starry sky, and the animal world on a smooth ceiling or a flat wall, creating a warm, relaxing, and cozy atmosphere. This magic lamp can make you and your children fall asleep and enjoy every wonderful night easier.

1. Color light(Every press to change one color light or three color lights flash alternately. The sequence of color light is subject to actual operation.)
2. Volume down
3. Music button to loop play 12 songs
4. Volume up
5. Rotary switch
6. Main switch(beside the USB interface)

Remote Control Function

Caution: Please aim at the timing display screen of the product when you use the remote control.
Battery Type : AAA * 2

Lamp Film Replacement Method

There are two lamp films( the black projection film) inside the product.

Connection to the Power

1. Connect to the computer or power bank with the USB cable.
2. Plug into the socket by USB cable with 5V 1Aadapter (Adapter not included).

Cleaning

1. To prevent damage to the electronics, do not submerge the toy in water. Only use a soft damp cloth to clean the toy.
2. Protect the toy against heat, dust, sand, and water.
3. Products are to be disconnected from the transformer before cleaning.

Cautions

1. Products must be used with the suitable AC adaptor (output: 5VDC, 1A) when you plug into the socket.
2. When using this product, please do not place it on an unstable surface incase of falling and breaking.
3. For better and clearer projection effect, this product uses super bright LED beads. Please do not closely stare at the lamp for a long time to avoid dizziness.
4. The lampshade is not resistant to high temperature, please don’t place the projector in a high-temperature place, otherwise the film will be deformed.(Eg: in the sun or under glass windows).

Warning

1. Not suitable for children under 36 months. Small Parts. Choking hazard. For your child’s safety. Please read these instructions and keep them for future reference.
2. To prevent the risk of strangulation: Do not place in bed or child’s sleeping environment. Do not attach strings or straps to the toy.
3. Toys must only be used under adult supervision.
4. Remove and discard all packaging and packaging fasteners before giving this product to a child.
5. Do not use the product if any components are broken or missing.
6. Before each use, ensure that the product and all its components are not damaged. If damaged or broken, immediately discard the toy.
7. Don’t use accessories or replacement parts other than those approved by Moredig.
8. The USB cable is not a toy.
9. Please keep the lamp and all appliances dry and clean, don’t touch an electrical appliances with wet hands or when liquids are present.

WEEE Notice

Information for Users on Collection and Disposal of Old Equipment and Used Batteries.

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.

For proper treatment, recovery, and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

For more information about the collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service, or the point of sale where you pur -chased the items. Penalties may be applicable for incorrect disposal of thiswaste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

FCC ID: 2AXSGRCPL-001

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause armful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Important: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>