KAYOBA 009022 Cooler Box Instruction Manual
- June 6, 2024
- KAYOBA
Table of Contents
KAYOBA 009022 Cooler Box
SAFETY INSTRUCTIONS
- Read all warnings, safety instructions and other instructions. Failure to follow all the instructions and safety instructions can result in death, personal injury and/or material damage.
- Check that the fan can rotate freely and that the ventilation openings are clean to prevent overheating. Never cover the product.
- Do not use the product if the power cord or plug/car adapter are damaged – the risk of fire and/or electric shock.
- Do not use the product in an explosive environment, e.g. near flammable liquids, gas or dust.
- Do not dismantle the product or attempt to repair it- risk of electric shock. Repairs must be carried out by an authorized service center.
- Do not expose the product to water or any other liquid.
- Avoid turning the product upside down.
- Do not subject the product to knocks and blows.
- Do not expose the product to rain or moisture.
- Keep children under supervision to make sure they do not play with the product.
- The product is not intended to be used by persons (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowledge on how to use it, unless they have received instructions concerning the use of the product from someone who is responsible for their safety.
- Always keep the ventilation openings clean.
- Do not use electrical devices in the product, unless recommended by the manufacturer.
- Check that the cables are properly connected. A loose connection can result in overheating and that the unit stops working.
SYMBOL
- Read the instructions.
- Approved in accordance with the relevant directives.
- Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
- Rated voltage 12 VDC/230 V ~ 50 Hz
- Output 45W
- Volume 40 L
- Size 378 x 243 x 404 mm
- Cord length 1.9 m/1.7 m
- Cooling capacity 18 °C*
DESCRIPTION
- Plug for vehicle socket/power point
- Control panel
- Status light
- Switch cooling/heating
- Switch eco mode/max
USE
Before using for the first time, wipe all removable parts with a damp cloth. Never use abrasive detergents.
HOW TO USE
- Connect the cooler box to the required power source and check that the status light on the adapter goes on. (vehicle socket 12 voe or powerpoint).
- Select ECO mode or MAX (only for mains connection).
- Select warming (status light goes red) or cooling (status light goes green).
NOTE:
- For best cooling effect it is recommended to put chilled food in the cooler box. Cooling food at room temperature takes two to three hours.
- The warming function is intended to keep food warm, not to heat cold food.
- When used according to the instructions food can be kept warm for several hours.
MAINTENANCE
CLEANING
Clean the cooling box with a damp cloth and mild detergent.
WARNING!
- Always pull out the plug from the powerpoint before cleaning the cooling box.
- Do not clean the box under running water.
- Do not use strong or abrasive detergent.
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>