niko 101-91004-40 Dimmer Switch Instruction Manual
- June 6, 2024
- niko
Table of Contents
niko 101-91004-40 Dimmer Switch
Niko dimmer switch for Hue system
Installation
OPTION1 OPTION2
Dismantling
Configuration
Specifications
- Article number: 101-91004-40
- Power consumption: none (battery-free)
- Power supply: integrated kinetic energy harvester
- Number of configurable switches: 4
- RF protocol: Zigbee® (Green Power)
- Modulation / Data rate: Direct-Sequence Spread Spectrum (DSSS) with
- Mounting methoD: wall mounting
- Mounting height: 110 – 120 cm
- Weight: 39 g
- Temperature (storage / operating): -25 – +65 °C*
- Dimensions (HxWxD): 63.5 x 63 x 16 mm
- Protection degree: IP20
- Configuration: Philips Hue app
- Maximum range (indoor): 20M
- Humidity: 0 – 95 % relative humidity, non-condensing
- Operating frequency: 2.4 GHz (2404 MHz to 2481 MHz)
- Maximum RF power: 7 dBm / 5 mW
- Antenna: integrated antenna
- Marking: CE, WEEE
The maximum temperature difference between the Niko dimmer switch and a receiver should not exceed 40 °C
Troubleshooting
Support & contact
- Industriepark West 40 9100 Sint-Niklaas, Belgium www.niko.eu
- contact: +32 3 778 90 80
- visit: support@niko.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>