HDKing FS01A Action Camera User Manual
- June 6, 2024
- HDKING
Table of Contents
FS01A
Action Camera Usual Manual
Forward Thank you for purchasing this camera. Please carefully read the manual
before using it, and keep it in a safe place for future reference.
The information covered in this user manual is based on the latest information
at the time of its preparation. The screens, illustrations, etc. used in this
manual are intended to provide a more detailed and intuitive explanation of
the operation of the camera. Due to the differences in technology development
and production batches, they may differ slightly from your actual digital
video camera.
User Notice
This camera is required to use a TF high-speed card (multimedia memory card) of U3 or higher. Memory card instructions
- When the memory card is first used, please make sure that the memory card is formatted first when the card has the data or other images that the camera can’t identify.
- Please turn off the camera before inserting or removing the memory card.
- If the memory card performance degradation, need to buy a new memory card. Please know that using the memory card multiple times will degrade its performance.
- The memory card is a precision electronic device. Do not bend the memory card and avoid falling or being stressed.
- Do not place the memory card in strong electric or magnetic environments, such as near a speaker or television receiver.
- Do not use or leave the memory card in an overheated or under-cooled environment.
- Keep the memory card clean and avoid touching any liquid. If the memory card is touching the liquid, wipe it dry with a soft cloth.
- When the memory card is not in use, place it in the card sleeve.
- Please note that the memory card will become hot after prolonged use. This situation is completely normal.
- Do not use the memory card with other digital cameras. If you want to use a different memory card with your camera, format it first.
- Do not use a memory card formatted on another digital video camera or card reader.
- If the memory card is in one of the following conditions, the recorded data may be damaged:
– The memory card is not used properly.
– When recording, deleting (formatting), or reading, the power is turned off or the memory card is removed.
Features
- Body waterproof 5 meters and provides a waterproof shell that is waterproof and allows you to shoot wonderful water sports
- Shooting function
- Ultra HD display to show and play back the great video shots
- Battery removable, easy to replace the battery to extend the use time
- Available to shoot photos or record videos while charging
- HD wide-angle lens
- Support up to 32G memory card
- Supports a variety of video recording formats 4K30FPS … 1080P … 720P
- Multiple shooting modes, support single shot or automatic shooting
- Supermini appearance, many colors available
Pictures Diagram
1. OK Button
2. Microphone
3. Mode Button
4. Speaker
5. HDMI| 6. USB
7. Power on/off button
8. Dual Screen
9. Lens
10. Screen| 11. Charging Indicator
12. Working Indicator
13. Battery
14. TF card
15. Tripod mount
---|---|---
Indicator
Working Indicator| 1. LED flashing during recording
2. LED turns off when turn off
---|---
Charging Indicator| 1. LED is on during charging
2. LED is off after finishing charging
Button Instruction
Power button| 1. Long press the power button, the power indicator is on, and
shot press to turn on wifi ;
2. Long press the power button to turn it off;
3. To make down choose in the menu
---|---
OK button| 1. Recording/Shoot(Including slow recording/Time-lapse
video/loop/continuous shooting/timing / loop)Mode
2. Long press to enter setup menu in the recording menu (recording/loop
recording/slow recording/Wifi ); Choose button when using together with the
power button in the setup menu; short press to confirm
3. Long press to enter setup menu in the shooting menu(Single shot,
continuous shooting, delayed shooting wifi, etc.), when using together with
the power button in the setup menu; short press to confirm;
4. Long press to enter File play preview list; choose when using together
with power button; short press to play.
5. play or pause when the video is playing
M button| 1. short press to switch mode or setup menu;
2. Long press to switch screen
Operation diagram of video interface
Recording mode
1. Recording Mode 2. Recording Time 3. Available Recording Time 4. Voice Recording State 5. Battery capacity 6. Playback (touch the screen to enter the playback interface) 7. Resolution display (touch the screen to enter the video mode adjustment) 8. Menu settings (touch the screen to enter the video and system menu settings) 9. Video Settings Menu 10. System Settings Menu 11. Exit 12. Video Playback Directory 13. Photo Playback Directory 14. A number of Playback Files 15. Delete 16. Exit
Photo Mode
1. Photo mode 2. Quantity of photos 3. Available photos quantity 4. Battery icon 5. Photo playback 6. Resolution display (click this icon to enter photo mode adjustment) 7. Settings menu (click this icon to enter the picture and system menu settings) 8. Photo settings menu
Shortcut mode
6.3.1 After turning on the camera, long-press the video confirmation button to display the interface of Pictures 2 (click the middle place at the bottom pop out pictures2 interface, click the shortcut menu icon to perform shortcut operation), press the M key to exit, or click on the upper right corner “X” of picture 2 to exit.
6.3.2 After turning on the camera, slide the screen left and right in the middle of the touch screen to switch the recording/photo mode to record or take photos.
6.3.3 After turning on the camera, short press the M key to switch to the camera mode (or slide the video/photo mode on the left or right side of the recording interface screen to record or take a photo operation), long-press the video button to display the interface of Picture 2 (or click on the touch screen) Picture 1 shows the interface of picture 2) The shortcut menu can be used for quick operation. Press M to exit (or touch the screen to click X in the upper right corner of picture 2).
Button function operation diagram
Basic function operation
- Playback, recording settings, photo settings
Shortly press the M key after power on, it will show the following mode cycle picture. Press the OK button to confirm (or touch the screen or click the icon in the lower-left corner of the video preview interface to enter the playback state directly, click the icon in the lower right corner to directly enter the video or photo settings) Picture 3, then press the M key or the power button to select playback, recording settings, and photo settings.
| |
---|---|---
Video preview interface| Photo Preview interface| Playback /video
setting/photo setting
2. 2. How to delete video/photo files
a. Video file delete：
a-1 Button operation deletion step: short press M key to switch the mode menu
to “Playback” as shown above, press ok to enter the following picture “Video
playback preview interface”, short press power button to move to select the
icon, long-press OK to confirm entering file to delete the selection, short
press the ok button to select the file to be deleted, then press the ok button
to enter the following picture to delete the interface, with the power button
(direction button) to select the deleted item, press the ok button to confirm
the deletion.
a-2 How to delete by using a touch screen: in the video playback review
interface”, click the icon, and then choose the file, click and pop out delete
interface, click delete.
b. Picture file delete:
b-1 Delete file steps by buttons: short press M key to switch the mode menu
to “playback”, Press ok button to enter “video replay view interface” as
pictures showed below.
Short press power button to choose” photo playback review interface”, then
press ok button to confirm, and then press the power button to choose icon,
Long press ok button to enter the deleted interface, press power button to
choose the deleted item, and press ok button to confirm the delete.
b-2 How to use the touch screen to operate the delete step: In the “picture
playback preview interface”, touch the icon, then touch to select the file to
be deleted, and finally click the icon, then “Delete interface” pops up, click
delete.| |
---|---|---
Video playback preview interface| Picture playback preview
interface| Delete Interface
3. Short press the power button to turn on Wi-Fi, and short press again to turn off Wi-Fi. The Wi-Fi name is different for each item and all password is 1234567890. The below picture is only for reference.
Computer download photo/video
After the camera is connected to the computer and enters the removable disk
mode, a removable disk will be added in the “My Computer” window. The captured
photos or videos will be stored in the “JPG\VIDEO” directory on the removable
disk. You can enter and copy the files to your computer’s hard drive.
Note: Do not disconnect the USB connection during the download of the
file. The memory card cannot be inserted or removed during a USB connection to
avoid data loss. If The computer sets this USB connection in camera mode, the
computer cannot detect the removable disk.
WIFI APP Connection
Before using the wifi function, please install the “iSmart DV” APP program on
your smartphone or tablet.
Remarks:
For Android smartphones, please search for “iSmart DV” on Google Play and
install to use it. For IOS smartphones, Please download them from the app
store by searching “iSmart DV”.
Connection steps:
- After tuning on, short press the power button, and there will be a message “WIFI Waiting Connection “Icon that appears on the screen.
- Open the wifi connection on the phone, search for the WIFI name “Action Cam_xxx” and connect it (the original password is 1234567890);
- Click on the “iSmart DV” app to preview the picture being taken in real-time on the app. Photo, file playback/delete, etc.
- You can also scan the following QR code with your mobile phone to download:
http://www.ligoor.com/app/ismartdv/ismartdv.html
Android/IOS
Note: You can search “iSmart DV” and download the app from the app store
for IOS and Google Play for Android
Specification
Specification|
---|---
CPU| V39
Sensor| IMX278/IMX317/IMX078/IMX274 apolegamy
Lens| 170HD wide-anglLense
Screen| 2.0″ LCD
APP| iSmart DV
Picture Format| JPEG
Video Format| MOV
Compression Format| H.264
Port| Micro USB2.0, HDMI
Storage| MAX to 32G, Micro SDHC
Power| 5V/1A
Mic| Support
Speaker| Built-in
Battery Capacity| 1350mAh (Real 1000mAh)
Recording Time| 4K/About 85Min
Charging Time| About 2-4hours
WIFI| WIFI 2.4G
Language| English, Simplified Chinese, Traditional Chinese, German, French,
Italian, Spanish, Portuguese, Polish, Dutch, Russian, Japanese
Operation System| Windows XP/7/8 SP3/Vista and Mac 10.5 or above
Working
Temperature
| -10℃～+55℃
Storage Temperature| -20℃～+70℃
Humidity| 5% ～ 95% (no frosting)
Use Environment| Extreme sports, outdoor sports, cycling, diving, family
safety, etc.
|
Note: Product design specifications are based on the latest information at the time of writing this specification. Subject to change without notice, please refer to the actual camera.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.a
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.