Dongguan HDKing Smart Technology Co Ltd F03N Dual Screen 4K Body Waterproof Action Camera User Manual
- June 7, 2024
- Dongguan HDKing Smart Technology Co Ltd
Table of Contents
- Dongguan HDKing Smart Technology Co Ltd F03N Dual Screen 4K Body
- Product Information
- Product Usage Instructions
- Operation Guide
- Main Features
- Quick Start Guide
- Product Diagram
- Button Instruction
- Operation diagram
- Quick Menu
- WIFI Connection
- Specification
- FAQ
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Dongguan HDKing Smart Technology Co Ltd F03N Dual Screen 4K Body
Waterproof Action Camera
Product Information
Specifications
- Requires Micro SD high-speed card (multimedia memory card) of U3 or higher
- Quick start guide for easy setup
- Language selection interface
- Date/Time/Date Format setting interface
- Memory card format interface
- Live view interface
Product Usage Instructions
Inserting the Battery
Press and hold the lock switch, push down to open the battery cover, and
install the battery according to the marked direction. Remove the battery if
the camera is not used for a long time to avoid leakage or damage.
Inserting the Micro SD Card
Use a high-quality micro SD card of U3 or higher speed. Insert the micro SD
card according to the marked direction on the camera. Connect the camera to a
computer to format the micro SD card for the first use. Replace the memory
card if it cannot be read.
Powering On the Camera
Press and hold the Power button to turn on the camera. Select the language
and set the Date/Time/Date Format before proceeding.
Formatting the Memory Card
After setting the date and time, format the memory card on the camera. Once
formatting is complete, you will enter the live view interface.
Product Diagram
FAQ
-
Q: What type of memory card does the camera require?
A: The camera requires a Micro SD high-speed card (multimedia memory card) of U3 or higher. -
Q: How do I format the memory card for first use?
A: Connect the camera to a computer to format the micro SD card.
Make sure to format it on the camera before initial use.
Hello
Thank you for purchasing this camera. Please read the manual carefully before
using, and keep it in a safe place for future reference.
The contents covered in this manual is based on the latest information at the
time of writing the manual. Due to the differences of technical development
and production batches, it may be slightly different from your actual use.
Please take the actual product features prevail.
Operation Guide
This camera is required to use a Micro SD high speed card (multimedia memory card) of U3 or higher.
Memory card instructions
- If you use a newly purchased memory card for the first time, or there are some data or images taken by other cameras in the memory card that cannot be recognized by the camera, please make sure to format the memory card first.
- Please turn off the camera before inserting or removing the memory card.
- After using the memory card for many times, its performance will be reduced. If performance decreases, you need to buy a new memory card.
- Memory card is a precision electronic device. Do not bend, drop or subject with heavy pressure.
- Do not place the memory card in a strong electric or magnetic environment, for example nearby the speakers or TV receivers.
- Do not use or place the memory card in an excessively hot or cold environment.
- Keep the memory card clean and avoid contacting with any liquid. If the memory card contacts with liquid, wipe it dry with a soft cloth.
- Put the memory card into the card holder when it is not in use.
- The memory card becomes hotter after long-term use. This situation is normal.
- If one of the following conditions occurs of the memory card, the recorded data may be damaged:
- Improper use of the memory card.
- Turn off the camera or remove the memory card during recording, deleting(formatting) or recognizing.
Main Features
- Body Waterproof design, convenient for you to record wonderful water sports. It can support underwater 30m if bundled with the waterproof case
- Ultra HD display main screen 2.35″ with touch screen, secondary screen 1.4″, allowing display and playback the wonderful videos recorded
- HD Wide angle lens
- Support image stabilization
- Support 2.4G/5G Wi-Fi connection
- Support 2.4G wireless remote
- Removable big capacity battery, convenient to replace the battery and prolong the service life
- Support charging during recording
- Support micro SD card max up to 512GB
- Multiple video recording modes including 4K/2.7K/1080P/720P
- Multiple shooting modes, such as single shot, auto etc…
Quick Start Guide
Insert the battery
Press and hold the lock switch, push down to open the battery cover, and
install the battery according to the marked direction. If the camera is not
used for a long time, please remove the battery to avoid leakage / damage to
the camera or battery power loss.
Insert the Micro SD card
Before using this camera, please insert (when the camera is off) a high-speed
and good quality micro SD card of U3 or higher speed. Insert the micro SD card
according to the right direction marked on the camera. Please connect the
camera to the computer to format the micro SD card for the first use.
Note: When the micro SD card cannot be read, please replace the memory
card.
Press and hold the Power button to turn on the camera, it enters the language selection interface, then select the language you want, and enter the Date/Time/Date Format setting interface.
After the date and time setting finished, the camera enters the memory card
format interface. After formatting is completed, it enters the live view
interface.
Note: Please make sure format the memory card on the camera for the first
use.
Product Diagram
- Lens
- 1.4″ Front Screen
- Working Indicator
- Charging Indicator
- 2.35″Rear Screen
- OK/Confirm Button
- Power Button
- Microphone
- Battery
- TYPE-C port
- Micro SD card slot
- Speaker
Indicator
**** Working Indicator|
- LED lights blue when camera is on and in live view interface;
- LED flashes during recording
---|---
**** Charging Indicator|
- LED lights red during charging
- LED is off after fully charged
Button Instruction
**** Power Button|
- Press and hold this button to power on the camera; Press and hold this button around 3 seconds to turn off the camera when camera is on;
- Short press to change between video recording / picture capturing/playback mode on live view interface;
- Short press to choose delete or return to playback in playback mode.
---|---
**** OK/Confirm Button|
- Short press for video recording / photo capturing on video / picture mode;
- Press and hold this button around 3 seconds to switch between the back 2.35” screen and front 1.4” screen.;
- Short press to play/pause during video playback;
- Short press to confirm the selection in setting menu
Operation diagram
Video Mode
Turn on the camera, it will enter into the live view interface with default in
video mode. Click the video resolution to enter into the video setting menu,
you can set the video Resolution, Video Code, Loop recording time etc.
1| Micro SD card| 2| Remaining recording time of the card| 3| Audio| 4|
Battery Power
---|---|---|---|---|---|---|---
5| Video Mode| 6| Current Video Resolution| 7| Zoom in|
Photo Mode
Short press the Power button to switch from video mode to photo mode. Click
the photo resolution to enter into the photo setting menu, you can set the
Image size, Exposure time, Selfie Timer etc.
1| Number of captured photos| 2| Remaining photo quantity of the TF card| 3|
Photo Mode| 4| Current Photo Resolution
---|---|---|---|---|---|---|---
Playback
Short press the Power button again to enter the playback interface. You can
check all the recorded videos or photos here.
- Return icon
- Current file number
- Total file number
- Delete icon
- Previous file
- Play icon
- Next file
- Current Video Resolution
- Current Video Length
In playback mode, select delete to enter the delete menu, you can choose to
Delete Current /Delete All/Format;
Delete Current: To delete the currently selected photos or videos in the
micro SD card.
Delete All: To delete all the photos or videos in the micro SD card.
Format: Delete all the videos or photos saved in the camera.
General Settings
Slide from the top to bottom on the screen in the preview interface, click the
settings icon to enter the system settings.
Quick Menu
When camera is on, slide from the top to bottom on the screen, and the shortcut menu is shown as below, then you can do some quick settings.
1 | Screen lock | 2 | Volume | 3 | WIFI |
---|---|---|---|---|---|
4 | Small Screen | 5 | Brightness | 6 | Remote |
7 | Multi-screen diagram | 8 | General Settings |
When camera is on, slide from the bottom to top on the screen, or click the video mode icon on the preview interface to enter the mode selection interface and select the corresponding mode.
When the camera is on, slide from the left to right on the screen, you can switch between video mode and photo mode.
When the camera is on, slide form the right to left on the screen to enter into playback mode.
Computer Connection
When the camera is connected to computer, choose the mode from USB/Mass
Storage/PC Camera.
When choose Mass Storage, the camera will be used as a removable disk, which
will be added in “My Computer” window. The captured photos or videos will be
stored in the ” DCIM\MOVIE/PHOTO ” directory in the removable disk. You can
enter this directory to copy files to your computer’s hard disk.
Note: Do not disconnect the USB connection during the download of the file. If the PC camera function is activated, you are not able to see the removable disk option of the camera. Also you can not remove the micro SD card during the USB connection, otherwise the data will loss.
WIFI Connection
The camera allows full control, live previewing and playback of photos/videos on most Smart phones and Tablets.
- Download the App “Hi Camera” from “Google Play” or from the Apple “App Store”. You can also scan the following QR code to install the app:
- When camera is on, slide from up to bottom and click the WIFI icon, “Waiting for Connection…” appears on the screen.
- Activate WIFI in the General Setup Menu of your mobile phone.
- Go to the WLAN settings on your Phone, you will see “F03N5G***” in the list of available Wireless networks.
- Connect your phone to the “F03N5G***” via WIFI. The default WIFI Password for the device is: 12345678.
- Open the App “Hi Camera”, you can preview in real time, take photos or videos, playback, download, delete, share the photos/videos etc.
Specification
Model | F03N |
---|---|
Chipset | NT96580 |
Sensor | IMX415 |
Lens | FOV 147degrees |
Display | 2.35”touch screen +1.4” front screen |
APP | Hi Camera |
Photo Format | JPG |
Video Format | MP4 |
Video Encoding | H.264 |
USB connection | Type-C |
Memory | Support Micro SD card up to max 512G |
Power | 5V/1A |
MIC | Support |
Speaker | Built-in and External |
Battery capacity | Removable Li-ion battery, 3.8V/2150mAh |
Battery Life | Support continuous recording of 150mins on 4K resolution |
Charging Time | 4H |
WIFI | 2.4G&5G |
**** Language | English/French/German/Spanish/Italian/Portuguese/ simplified |
Chinese/Japanese/traditionalChinese/
PyccK1vi/Roman,/Polski/cesky/Slovensky/Hungarian/Suomi/
Dansk/Nederlands/Turk9e/ l.lJ.l’n
---|---
Working Temperature| -10℃~+55℃
Storage Temperature| -20℃~+70℃
Relative Humidity| 5% ~ 95% (no frost)
Application| Extreme sports, outdoor sports, cycling, diving, family safety,
etc.
FAQ
FAQ | Solution |
---|
- When promotes with card low speed
- The memory card can only support taking photos but not videos
- When playback on the camera, the video is stuck/distorted.
- The video only records for a few minutes then pause automatically. The recorded files cannot be reviewed
| Please kindly replace the micro SD card to a high speed card with
original brand such as Samsung/SanDisk/Lexar
The camera can not connect to an iPhone via Wi-Fi/The display keeps spinning
in circles| Turn off WAP and private areas
When download to iPhone, it prompts insufficient Free memory|
APP/Mobile Settings—Clean up the application storage
App crashes| Delete the device that has been added and then add
the device again.
---|---
The local album does not display when downloaded on an Android smartphone|
Please turn on the App permissions in the settings.
Camera is freeze| Turn off the camera then restart, do not use the
App to review the videos.
Camera can not be turned on.| Please remove the battery and
connect the camera to the charging cable for testing. If it still cannot turn
on, please contact the manufacturer.
The shooting angle of view is too narrow.| Turn off anti-shake (EIS) to
get a wider angel of view.
The recorded object is deformed.| Please activate the distortion
correction function in the menu.
**** The time is not synchronized.| You can set the time to local time in
the settings, or connect to the APP, and the camera will automatically
synchronize the time of smartphone.
Disclaimer
- The product specifications are developed on the latest information when prepared for this manual, it is subject to change without notice, whichever is the actual camera.
- When the camera is not used for a long time, please remove the battery to avoid leakage damage to the camera or battery power loss.
- The factory will not bear any responsibility because of improper use.
- The factory prohibited to dismantle the camera without permission, and the factory shall not bear any responsibility because of it.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition, compliance with
exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>