ARRI L2.0039438 Orbiter Dome Mini User Manual
- June 6, 2024
- ARRI
Table of Contents
ARRI L2.0039438 Orbiter Dome Mini
OVERVIEW
- Dome
- Quickmount guides
- Digital Optics Interface (5-pin)
- Locking pin
- Locking slider
- Guide for locking pin
Intended use
This product is an accessory for the „Orbiter“ luminaire. It is in-tended to illuminate persons and objects. Always follow the safety information. Any usage other than described above is not permitted and can damage the product. You are not allowed to modify the product. This product fulfills all legal requirements.
Safety Instructions
- Please read and observe all instructions delivered with the product before use. The instructions contain important infor-mation for safe handling.
- Please keep all instructions delivered with the product for possible subsequent owners.
- Be qualified for the appropriate use of the accessory.
- Follow the user manual.
- Ensure safe usage.
- Use the product in accordance with regulations.
- Follow the latest regulations and standards.
ARRI is not liable for damages caused by improper use or incor-rect operation.
To Mount the Dome Mini
- Remove the protective cap from the Quick Lighting Mount.
- Align the locking pin (4) with the guide for the locking pin (6) and insert the Dome Mini in the Quick Lighting Mount.
- Turn the Dome Mini clockwise, until the locking slider (5) au-dibly engages. The Dome Mini can not be turned counter-clockwise if the locking slider engaged full.
Automatic Optic Recognition
The digital optics interface of the Quick Lighting Mount recogniz-es when the Dome Mini is attached to the luminaire. It adapts the light output for best performance. If the digital optics interface fails to recognize the attached dome mini correctly, please clean the contacts as described in the Orbiter „Safety and Installation Manual“ which is available for free download on the ARRI web-site.
To Remove the Dome Mini
- Push the locking slider (5) inwards and turn the Dome Mini counterclockwise until it stops.
- Remove the Dome Mini and place the protective cap on the Quick Lighting Mount.
Maintenance and Cleaning
Inspect the product regularly for visible damage.
- Do not use a damaged, deformed or dirty product.
- Remove loose dust and dirt by vacuuming or blowing out with low-pressure compressed air.
- Remove greasy deposits with a soft, lint-free cloth moist-ened with plastic cleaner. You can also use benzene-free petroleum ether or isopropanol. The cleaning agent must not contain benzene, ethanol, alcohol, organic substances or thinner. Dry the product with a soft, lint-free cloth.
In case of technical problems please visit us at: www.arri.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>