ARRI L03848 Orbiter Glass Cover User Manual
- June 6, 2024
- ARRI
Table of Contents
L03848 Orbiter Glass Cover
User Manual
1 Glass cover | 4 Locking pin |
---|---|
2 Quickmount guides | 5 Locking slider |
3 Digital Optics Interface (5-pin) | 6 Guide for locking pin |
Intended use
This product is an accessory for the „Orbiter“ luminaire. It is intended to
illuminate persons and objects.
Always follow the safety information.
Any usage other than described above is not permitted and can damage the
product and lead to associated risks such as short-circuit, fire, electric
shock, etc. You are not allowed to modify the product.
This product fulfills all legal requirements.
Safety Instructions
- Please read and observe all instructions delivered with the product before use. The instructions contain important information for safe handling.
- Please keep all instructions delivered with the product for possible subsequent owners.
- Caution – breaking glass. Replace a broken glass immediately. Do not use an accessory with broken glass.
The user must:
- Be qualified for the appropriate use of the accessory.
- Follow the user manual.
- Ensure safe usage.
- Use the product in accordance with regulations.
- Follow the latest regulations and standards.
ARRI is not liable for damages caused by improper use or incorrect operation.
To Mount the Glass Cover
- Remove the protective cap from the Quick Lighting Mount.
- Align the locking pin (4) with the guide for the locking pin (6) and insert the Glass Cover in the Quick Lighting Mount.
- Turn the Glass Cover clockwise, until the locking slider (5) audibly engages. The Glass Cover can not be turned counter-clockwise if the locking slider is engaged fully.
Automatic Optic Recognition
The digital optics interface of the Quick Lighting Mount recognizes when the Glass Cover is attached to the luminaire. It adapts the light output for the best performance. If the digital optics interface fails to recognize the attached Glass Cover correctly, please clean the contacts as described in the Orbiter „Safety and Installation Manual“ which is available for free download on the ARRI website.
To Remove the Glass Cover
- Push the locking slider (5) inwards and turn the Glass Cover counterclockwise until it stops.
- Remove the Glass Cover and place the protective cap on the Quick Lighting Mount.
Maintenance and Cleaning
Inspect the product regularly for visible damage.
- Do not use a damaged, deformed, or dirty product.
- Remove loose dust and dirt by vacuuming or blowing out with low-pressure compressed air.
- Remove greasy deposits with a soft, lint-free cloth moistened with plastic cleaner. You can also use benzene-free petroleum ether or isopropanol. The cleaning agent must not contain benzene, ethanol, alcohol, organic substances, or thinner. Dry the product with a soft, lint-free cloth.
- The product can be disassembled to remove dust or dirt that gets between the glass and retaining ring. Please contact your ARRI service partner for more information.
Specification
Ident number | L2.0039439 |
---|---|
Dimensions (⌀ x H) | approx. 157 mm x 34 mm |
approx. 6.2 in x 1.3 in
Weight| approx. 0,4 kg (0.88 lbs)
Ingress Protection| IP24
Conditionally weatherproof
Protection Class| III
Operating temperature| ta = -20° C bis + 45° C
ta = -4° F to +113° F
ARRI Service
In case of technical problems please visit us at:
www.arri.com
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Global Application & Services
Arriweg 17
D-83071 Stephanskirchen
Germany
Design and specifications are subject to change without notice.