SEAVER S72-800 Safefit Airbag Vest User Manual

SEAVER S72-800 Safefit Airbag Vest

Precautions for use

This airbag vest is designed for horse riding. This vest is not suitable for any other use. This vest has been designed to prevent mechanical shocks to the rider when falling to the ground with the airbag triggered (inflated airbag). This vest cannot protect against all impacts. Protection is only provided in the inflated state Any modification or misuse will dangerously reduce the performance of the airbag.  Please wear a vest that fits your size and use it as outerwear that protects the upper half of the body. Can be used from 5 to 40 °C.Gas cylinders are hazardous materials and should be kept out of reach of children and used with care. No protector or vest offers complete protection against injury.

General information

The SAFE FIT must be worn as the last layer of clothing. Under no circumstances should it be worn under a rigid protective vest, which would prevent the proper functioning of the inflatable protection. The system deploys as soon as the rider disengages from the horse and from the moment the activation distance is reached (the activation distance is the maximum length that the connection strap allows before the system is torn off). From this moment, the ball-key system is torn from the case, the striker perforates the cartridge and releases the pressurized gas that instantly fills the air cushions to protect the individual in his fall. The SAFE FIT airbag protection system does not guarantee absolute protection of the rider. The rider must always wear a riding helmet, even when equipped with a protective airbag vest or other protective equipment. The system can only be pulled off with a great deal of force, which considerably limits the number of cases of unintentional triggering in normal use. If the connection strap, when being pulled out, meets an obstacle (e.g. the body of the rider), it is possible that the system will be activated before the distance pulls out the system. If the rider falls together with the horse without being completely disengaged from the horse, and without the activation distance being reached, the system will not be activated. In addition, the system does not protect the parts not covered by the air cushions.

size chart

To ensure that each vest is a perfect fit for its wearer, Seaver offers several sizes of airbag vests. To determine the size of your airbag vest, use a measuring tape to measure your chest size. The chest circumference is measured horizontally, at the level of the tip of the breasts. Then measure the shoulder-waist length, which is measured vertically 50 mm above the top of the iliac crests, to the top of the shoulders.

Content

Airbag

Beyond the activation distance, the SAFE FIT system activates and the CO2 retained in the cartridge is sent into the air chamber, which will allow shock absorption even before the airbag is fully deployed.
Once fully deployed, the airbag deflates very gradually so as not to shock the body which may have been subject to trauma. The system may not function properly if all or part of its components are damaged (outer fabric, inner tube, etc.). In case of doubt, perform a first visual check. If this is not enough, do not hesitate to contact our support service help@seaverhorse.com. Even if there is no apparent damage, the inner tube alone may be damaged. If you have any doubts, the wisest thing to do is to come back to the brand in order to have expertise on the good functioning of your SAFE FIT product.

C02 cartridge

• The gas contained in the cartridge is CO2.
• The gas cylinder complies with the certificate EN ISO 12402-7: 2006 / A1: 201.
• When the key ball is pulled out, a hollow needle punctures the end of the cartridge and releases the gas into the airbag.
• Screw-in the CO2 cartridge firmly and completely. If this is not done correctly, the needle may not perforate the cartridge. Your SAFEFIT system may not function properly.
• Do not reuse a used cartridge
• Replace the used cartridge with a new one immediately.
• A used cartridge is identified by a hole at the end.
• Store at a temperature below 40°C.
• Do not store in a car where the temperature could rise.
• Do not shock the cartridge.
• Do not heat the cartridge.
• Do not allow corrosion to form on the surface of the cartridge. If any corrosion appears, replace the cartridge immediately.
• Make sure the cartridge is completely drained of gas before unscrewing.
• Do not attempt to puncture the cartridge
• Cartridge volume varies from model to model. Use the correct volume cartridge.
• Use the CO2 cartridge only for this purpose.
• Use only approved and certified Seaver cartridges.
• Keep cartridges out of reach of children.
• Once the cartridge is in place, do not attempt to unscrew or remove it. Screw the cartridge firmly and completely into the housing.
• The release of the cartridge is likely to cause the horses to panic.

Wrenches

The wrenches (Flat wrench or Allen wrench) allow unscrewing the cap of the system to arm the cartridge on its support inside the airbag vest. They also allow to removal of the used cartridge by the same principle.

connector cord

The connector cord allows you to fix the connection strap that links the gas cartridge in the airbag vest. It remains in place on the rider’s saddle. It is fixed on each side of the saddle, at the level of the stirrups bars, under the saddle’s skirt.

Operation

Arming the system

• Prepare the tools to arm the system: Gas cartridge, wrench.
• Remove the rubber cap.
• Option 1: If you choose the flat wrench, unscrew the screw completely.
• Option 2: If you choose the Allen wrench, unscrew the screw completely.

You can use either wrench depending on your preference.

• If the SAFEFIT airbag is accidentally triggered while you are riding, stay calm. Stop your horse and take the necessary precautions.
• If your airbag has been damaged on the outside after it has been triggered, perform the checks specified in the brand’s inspection procedures and replace the gas cartridge. If the damage is too severe, it may not be repairable.
• Check the following points if you reassemble the airbag yourself after it has been triggered:
• Replace the CO2 cartridge with a new one of the correct capacity for your vest.

Refurbishment of the system

• Your airbag can be reused, if it is reassembled according to the following procedure and if it is done correctly. Your airbag cannot be reassembled if it was damaged during the last use. Check yourself or via the brand to see if the vest is reusable. Replace the CO2 cartridge.
• Prepare the tools to restore the system New cartridge, wrench.
• Unscrew the used cartridge.
• Remove any residual gas inside your airbag by placing it on a flat surface. Apply pressure to each part of the air chamber to completely remove the CO2 gas. To avoid damage to the interior of your airbag, avoid bending or rolling it. It may take some time to evacuate all of the gas, but it is necessary before reassembling. Open the inner zippers to gently flatten the inner tube.
• Pull the end of the connection strap through the hole provided and close the zip.

Refurbish the system yourself

• Prepare a new CO2 cartridge and the wrench provided with the vest.
• Unscrew the used cartridge.
• Unscrew the screw plug completely.
• Remove any residual gas from the airbag.
• Insert the screw in the hole at the bottom of the case and screw by hand.
• Install a new cartridge.
• Reinstall the case protection.

Washing

Do not machine wash or tumble dry. Brush the vest with a slightly damp stiff bristle brush. Air dry, preferably on a hanger. Do not immerse the airbag. The fabric is weather resistant.

Maintenance

Keep away from flames to prevent damage. To avoid any risk of explosion of the gas cartridge, the vest must be used and stored in an environment where the temperature is below 40°C. Always keep all accessories with your SAFE FIT product. When not worn, the airbag vest should be hung up. Do not store or stock it in high temperatures or in a humid environment. If the steel buckle or the key ball connector shows signs of rust or wear, replace it immediately. When the supplied gas cartridge is empty, it must be replaced with a cartridge of the same size and content. Check regularly that the airbag is in good condition. If you have any doubts, contact the manufacturer. Perform a general check once a year to ensure proper operation. Regularly check that the tie- down strap is securely attached to the saddle strap.

replacement

• An airbag vest is designed to be deployed many times. However, it is important to note that the use made of it and the type of fall influence its life span, estimated at 5 years.
• If any of the problems listed below are identified on your SAFE FIT product, consult the brand for replacement and/or repair:
• The jacket and/or inner liner are torn such that the inner tube becomes visible. The inner tube and/or cartridge show signs of deterioration or signs damage.
• The connecting strap shows signs of deterioration.
• Component materials show signs of deterioration or color change.

References

• Seaver - L’allié du bien-être de votre cheval

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>