RYOBI RY3112FW EZClean Power 6 ft. Flexible Wand Owner’s Manual
- June 6, 2024
- RYOBI
Table of Contents
RYOBI RY3112FW EZClean Power 6 ft. Flexible Wand
WARNING:
To reduce the risk of injury, user must read and understand the oper-ator’s manual for their power cleaner before using this accessory. To reduce the risk of injury or property damage, spray the pressure stream in a safe direction to ensure proper connection of all accessories before starting any cleaning project. Ensure compatibility and proper fit before using this accessory. Wear eye protection with side shields marked to comply with ANSI Z87.1. Risk of fluid injections; do not point at people, pets, electrical devices or the unit itself. Remove battery from tool before changing or adjusting accessories. For cold water use only. Save these instructions. Refer to them frequently and use them to instruct other users. If you loan someone this tool, loan them these instructions also.
APPLICATIONS
You may use this product for the following examples listed below:
- Extend the reach of your power cleaner for hard to reach areas.
CONNECTING THE FLEXIBLE WAND TO THE POWER CLEANER See Figure 1.
-
A – Power cleaner
-
B – Quick connector
-
C – Flexible Wand
-
D – Handle
-
Align the arrows and insert the end of the flexible wand into the power cleaner and push it until it clicks into place.
-
Pull on the flexible wand to be certain it is properly secured.
-
To remove, press the button on the power cleaner and pull to remove the flexible wand.
Connect your other EZ Clean Power Cleaner accessories to the flexible wand using their included installation instructions.
WARNING:
To reduce the risk of injury, always hold the wand handle securely. Never release the handle while the power cleaner is running.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>