escape BTM700WH Mini Wireless Earphones with Charging Case and Microphone User Manual

BTM700WH
Mini Wireless Earphones with Charging case & Microphone

TWS
True Wireless Streo

Accessories

Parts

1. Speaker
2. Dust-proof mesh
3. Multifunction touch control button / LED indicator
4. Microphone
5. The earphone’s charging ports
6. Lightning port to charge charging case
7. LED charging indicator
8. Power button

Features

Earphones

Charging case

Charging

Fully charge the IWS earphones and charging case before the first use. When fully charged, the charging case acts as a power bank and can fully recharge the earphones s 2 times in a single charge when on the go.

1. Charging the earphones and the charging case Plug in the charging case using the USB to lightning charging cable and a USB wall charger (not included). The charging case’s LED charging indicator will flash in red. Place the earphones into the charging case following the correct positioning; push lightly to make sure they are all the way in. The earphone’s LED charging indicator will turn red. When fully charged, the charging case’s LED charging indicator will stop flashing and stay lit in red. The earphone’s LED charging indicator will turn blue and shut off.
2. Charging the earphones Press the charging case’s power button to turn it on. Place the earphones into the charged charging case following the correct positioning, push lightly to make sure they are all the way in. The earphones will automatically begin charging. The LED charging indicator on the charging case will light up in blue while charging the earphones. The earphone’s LED indicator will start off red and turn blue when the earphones are fully charged. The charging case will automatically shut off a few seconds after the earphones are done charging.

**Pairing and operation

**

Each device is different, their pairing method may vary.

1. Pairing both earphones with your Bluetooth” device
   Remove both earphones from the charging case for double pairing (using both earphones); the earphones will automatically turn on*. You will hear the voice message “Power On” and the earphones’ LED indicators will flash in blue. Once the earphones have paired to each other you will hear “Connected”. One earphone will flash blue and red alternately, the earphones are now ready to pair with your device. Turn on the Bluetooth” function on your mobile phone or device and scan for available devices. Search for “BTM700” and click to conned; if your mobile phone or device asks for a password, enter 0000. When the earphones are connected to your device, you will see “Connected” on your phone and hear the voice message “Connected” in your earphones.

2. Pairing one earphone with your Bluetooth™ device
   Remove one earphone from the charging case for single pairing (using one earphone); the earphone will automatically turn on*. You will hear the voice message “Power On” and the earphone’s LED indicator will flash in blue. When the earphone flashes blue and red alternately, it is now ready to pair with your device. Turn on the Bluetooth” function on your mobile phone or device and scan for available devices. Search for “BTM700” and click to connect; if your mobile phone or device asks for a password, enter 0000. When the earphone is connected to your device, you will see “Connected” on your phone and hear the voice message “Connected” on your earphone.

Note:
If the earphones do not automatically turn on, or if the earphones are off and out of the charging case, then try one of the following:
a) Put both earphones into the charging case for 5 seconds then remove them at the same time, it should turn on automatically and pair together.
b) Press and hold both earphones’ multifunction touch control buttons for about 10 seconds, the earphones will turn on automatically and pair together.

Once the earphones are successfully paired with your mobile phone, you can:
Answer call/End call: Press on the Multifunction button once to answer the incoming call. Press on the Multifunction button once to end a call.
Reject call: Press & hold the Multifunction button for 2 seconds to reject the incoming call.
Real: Press on the Multifunction button 4 times to redial the last called number.
Play/pause music: Press on the Multifunction button once to pause/ play music.
Volume +/-: Press on one of the earphone’s multifunction buttons 2 times to raise the volume and the other earphone to lower the volume.

Notice

1. The earphones will shut off automatically once placed into the charging case. The charging -case ma automatically turns on and starts charging the earphones. when removed from the charging case, the earphones will turn on and automatically reconnect to the previously paired dente (the Peaces Bluetooth— function must be activated before the earphones turn on).
2. Remove previously paired earphones (BTM700) in your device’s “paired deices” list before pairing your earphones to avoid trying to connect to the wrong ones.
3. When trying to pair the earphones with your phone, please ensure that they are In pairing mode (I earphone flashing alternately In red and Clue) before you search It on your phone.
4. The earphones will automatically shut off after a few minutes if it doesn’t find any device to pair with. 5. The earphones will sound when the battery is low and shut off automatically when the battery is dead. You must charge the earphones if they have not been used in a while.
5. The charging case I.M indicator will flash in blue when the battery is low and shut off automatically.

Power on / Power off

Power on: Press and hold the Multifunction touch control button for about 10 seconds, the LED indicator will light up in blue and you will hear the voice message “Power on” in the earphones. Power oft Press and hold the Multifunction touch control button for about 10 seconds, the LED indicator will flash in red and you will hear the voice message “Power off” in the earphones.

Troubleshooting

Issue| Low battery|

 Charge the earphones

---|---|---
Start-up failure| Low battery| Charge the earphones
No sound after pairing| Not paired correctly| Re-pair the earphones
Red indicator flashes during phone conversation| Low battery warning| Charge immediately
No indicator during charging| Earphones are not in charging slots correctly| Put the earphones correctly in their slots
Shut down automatically| Low battery| Charge the earphones
Echo| Sound is too high or the environment is too noisy| Adjust the volume or change environment
Noise during phone calls| Environment disturbance or the earphones are too far from the device| Change environment or shorten the distance between earphones and device
Low volume of the caller| Wearing the earphones incorrectly| Adjust the earphone’s positioning
Signal is interrupting| Environment interferences or the earphone is too far from the device| Far away from the interference signal or shorten the distance between earphones and device

Warning

1. Please follow the rules described in this manual closely to ensure your safety. Before using this wireless micro earset and the power bank, we strongly encourage you to read this user
2. Do not modify, repair, or dismantle the device. Doing so may result in fire, electric shocks, complete breakdown of this device. All of which, are not covered under any warranty.
3. Do not use any diluents or volatile liquid to clean the device.
4. Do not use the device in a hazardous location. Do not keep the device in an environment having too low or too high a temperature for a long time, which may cause deformation, reduce the battery capacity, and shorten the device life.
5. Place the device and all accessories out of the reach of children and pets, small parts may be swallowed and cause suffocation and serious consequences.
6. Do not put the device into the water. Keep in a dry place.

Bluetooth” logo brand is a trademark or registered trademark of Bluetooth SIG Inc. AN other product or service names are the property of their respective owners. All items contained herein are imported by HRS GLOBAL and are not manufactured, sponsored endorsed, or distributed by Bluetooth SIG Inc.

Android’ is a registered trademark of Google Group inc. 10S. is a registered trademark of Apple inc. This item is imported by HRS GLOBAL and is not manufactured, sponsored. endorsed or distributed by Googly Group Inc.

Imported by
HRS GLOBAL
10050 COTE-DE-LIESSE
MONTREAL, QC, H8T 1A3
www.hrs-global.com
Made in PRC

Documents / Resources

| escape BTM700WH Mini Wireless Earphones with Charging Case and Microphone [pdf] User Manual
BTM700WH, Mini Wireless Earphones with Charging Case and Microphone
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>