Senseair Esense Slim 0-5V C02 Sensor Instruction Manual

June 6, 2024
Senseair

Installation Manual
eSENSE Slim 0-5V
CO2 sensor

General

The IAO-sensor product SSENSE Slim (sensor in industrial housing) is used to measure indoor air carbon dioxide concentration. The 300 mm long cable connected to the PCB makes it possible to place the sensor where the mounting is difficult.
The unit is designed for connecting to Direct Digital Control (DDC) with 0-5V signal inputs.
The eSENSE Slim has a permanently connected cable to the PCB.

Figure 1. The eSENSE-Slim with the cable.

Figure 2. The sense PCB. The brown cable is connected to OUT1 voltage output 0-5VDC

Electrical connections

The power supply has to be connected to +— and . is considered as system ground. The same ground reference has to be used for the sensing unit and for the DDC/signal receiver.

NOTE!
The same ground reference has to be used for the sensing unit and for the control system!

Connection Terminal Function Electrical Data Remarks

+∼
| Power (+)

Power ground (-)

| 24 VAC/DC+ (4-20%), 2W

24 VAC/DC-

| Red Black
OUT 1
OUT 2| Analogue Output 1 (+)
Analogue Output 2 (+)| 0-5 VDC 2-10 VDC| Brown0-2000 ppm  CO2 Not connected

Table I. Electrical terminal connections for eSENSE

Output Configurations

The sensors/controllers are supplied from the factory with a 0.-.5VDC linear output for OUT1 (see Table I).

Self-diagnostics

The system contains complete self-diagnostic procedures. A full system test is executed automatically every time the power is turned on. In addition, constantly during operation, the sensor probe is checked against failure.

NOTE!

The sensor accuracy is defined at continuous operation (at least 3 weeks after installation)

Figure 3. The dimensions of the sensor in mm and (inches)

Sinclair AB (headquarter)
Stationsgatan 12 Phone: +46-(0)653 – 71 77 70
Box 96 E-mail: infosenseair.com
824 08 Delsbo
SWEDEN Web site: www.senseair.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals