Guangdong Jianjian Intelligent Technology 2020JJRC2 1:14 2.4G All-terrain Off-Road Climbing Car Instruction Manual
- June 6, 2024
- Guangdong Jianjian Intelligent Technology
Table of Contents
Guangdong Jianjian Intelligent Technology 2020JJRC2 1:14 2.4G All-terrain
Off-Road Climbing Car Instruction Manual
1. Know Your Remote Control
- Turn Left/Turn Right
- Indicator Light
- Forward/Backward
- Power Switch
- High/Low Speed Switch
2. Instructions For Remote Controller and RC Car Installation
USB Charging Instructions
- Charge the battery before the first time you use it. The battery might discharge if not in use for a long period of time. However, overcharging might lead to a loss of battery life.
- Inspect the charging cord, plug, housing and other parts on a regular basis. If you find something damaged, please immediately stop using it and fix the damaged part.
- Do not connect the RC truck to other power connectors, which are not recommended. Ensure that the USB charging cable connects to the original battery and allow for about 3.5 hours to be fully charged, which will give about 30 minutes of playing time.
- Please use appropriate adapter for charging and do not use quick charger instead.
- The appropriate adapter has an input of 100-240V 50-60Hz 0.2A and an output of 5.0V 500mA 0.5-1.5A.
- Connect the battery with the USB charging cable. To charge the battery, connect the USB
charging cable to charging devices with USB interface, such as desktop, laptop, power bank, USB socket for USB adapter, etc.
3. Remote Control Driving
*Please read this manual carefully before operation and keep it properly for future reference.
FCC Statement
WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read More About This Manual & Download PDF: