msi B099QPSLW4 Pen User Guide

msi B099QPSLW4 Pen

Copyright and Trademarks Notice

All marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. We reserves the right to make changes to this document without prior notice.

Revision History

• Version: 1.0
• Date: 11, 2020

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and radiates radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

NOTE

• The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Shield interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statements The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Canada, Industry Canada (IC) Notices This device complies with Industry Canada license exempt RSS standard(s). This Class B digital apparatus complies with Canadian ICES‐003 and CAN ICES‐3(B)/NMB‐3(B).

Operation is subject to the following two conditions:

1. this device may not cause interference
2. this device must accept any interference, including interference that may cause undesired operation of the device. The IC ID for this device is xxxxx-xxxxxx.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual.

CE Conformity This device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.

Battery Regulations European Union: Batteries , battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal. California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California.
For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Safety Guideline for Using Lithium Battery Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer’s instructions.

WEEE Statement European Union: Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life

Introductions

Congratulations on becoming the owner of this MSI Pen, the finely designed MSI Pen. You will have a delightful and professional experience in using this exquisite MSI Pen. We are proud to tell users that this MSI Pen is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction.

• MSI Pen
• USB Type C Cable
• Fiber Pen Tip
• POM Pen Tip

Product Overview

This section provides a description of basic aspects of MSI Pen. It will help you to know more about the appearance of MSI Pen before using it. Please be aware that the figures shown here are for reference only.

1. Bluetooth Button Please refer to “How to Set Up Bluetooth Connection ” in chapter 3 for details of the below application.
   

   • Application on documentation: User can write with MSI proactive stylus in document.
   • Application on web page: While browsing on web pages user can control with MSI proactive stylus.
   • Application on to call Microsoft OneNote and Whiteboard: For business scenarios, user can call out OneNote or Whiteboard.
   • User customized function : For more application setting of MSI stylus, please refer to “How to Set Up Customize Funtion” in chapter 3.

2. Battery Status LED Please refer to “Begin to Manage MSI Pen Battery” in chapter 3 for details of below application.

   • LED turns to green while the battery is fully charged status.
   • LED glowes red while the battery is being charged or in low capactiy status.

3. Eraser / Select Button In writing or drawing mode as eraser or seletive pointer function .

4. Pen Tip Unpacking with a fiber pen tip and a POM pem tip.
   NOTE : Do not twist pen nib, please pull out and insert pen tip straightly when replacing pen tip.

5. USB Type C Port Compatible with all USB TypeC to supply power for the MSI Pen.
   NOTE: Please wake MSI Pen from charging for first use.

Specifications

The specifications listed here is reference only, and may vary and change without notice. Visit MSI official website at www.msi.com, or contact the local retailers to learn about the details of the product you purchased.

Physical Characteristic

• Dimension 148.67 mm x Φ 9.2 mm

• Weight 13.5 g
  I/O Port

• USB 1 x Type C
  Communication Port

• Bluetooth Supported
  Extra Accessory

• Cable 1 x USB Type C

• Pen Tip  1 x Fiber  1 x POM

How to Set Up Bluetooth Connection

Bluetooth pairing is a process in which two Bluetooth devices communicate with each other through an established connection.

Activating Bluetooth Connection

• Checking the Bluetooth status Before setting up a Bluetooth connection, it is a must to make sure that Airplane
  mode is turned off.

• Open up Settings, find and click [Devices] and select [Bluetooth & other
  devices] within the Devices selection menu.

• Pairing the Bluetooth devices, please select MSI Pen.

• Click [Done] to finish pairing MSI Pen.

Begin to Use MSI Pen

For a new user of MSI Pen, we would like to suggest you follow the illustrations below to begin to use the MSI Pen. By using a special double- etching process, MSI Pen becomes a slim pencil appearance. Also, it well fine tunes a weights-balance, allowing users to hold it comfortably.

Application

• Remote Control: MSI Pen is able to remotely control Microsoft Office: PowerPoint/Excel/PDF presentation and Web browsing for the business scenarios.
• Quick APP Launch: Microsoft Office: One Note for business scenario and Microsoft Office: White Board for creators.
• Ink Level: MSI Pen can display the most significant thickness, this can benefit to note-taking and drawing.
• Portable: MSI Pen can attach to the laptop via its proper magnet to avoid getting lost and tip getting damaged.
• Tilt Angle: MSI Pen can support up to the maximum 166 ° tilt for creators to sketch.
• Operation Temperature: MSI Pen operation temperature is 10ºC to 45ºC.
• Battery indicator: MSI Pen battery level will be on the taskbar to let users well know the battery status.
• Battery Life: MSI Pen battery can fully charge within 45 minutes and be used over 65 hours continuously.
• Battery LED Indicator: MSI Pen battery lights red, which means users can use it within 5 minutes.

How to Set Up Customize Function

Customize your MSI Pen function in “MSI Pen Control” Application. Follow below instructions to login and set your own MSI Pen Bluetooth shortcut.

Access MSI Pen Control Application

1. Long press 2 seconds of Bluetooth button to turn on customize the application.
2. Both One Click and Double Click can add optional functions from [Application Defined].
3. One-Click default setting function is connected to [OneNote].
4. Double Click default setting function is connected to [Whiteboard].

Begin to Manage MSI Pen Battery

For user of MSI Pen, we would like to suggest you follow the illustrations below to begin to manage your MSI Pen battery.
Battery Indicator Application

Battery Indicator Level: When users touche the screen with MSI Pen, the remaining battery power percentage of MSI Pen will be displayed on the taskbar for 2 seconds.

• Battery fully charged
• The battery is in medium power
• The battery is in low power

NOTE:

• Battery Life: MSI Pen battery can be used over 65 hours continuously.
• Battery Indicator LED (uncharged): MSI Pen battery lights red means users can use them within 5 minutes.

References

• dtsc.ca.gov/hazardouswaste/
• MSI - Redirect

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>