HENDI 273906 2 Lamp Infrared Food Warmer Bridge User Manual

HENDI 273906 2 Lamp Infrared Food Warmer Bridge

OVERVIEW

Dear Customer, Thank you for purchasing this Hendi appliance. Read this manual carefully, paying particular attention to the safety regulations outlined below, before installing and using this appliance for the first time.

Safety regulations

•  This appliance is intended for commercial use.
• Only use the appliance for the intended purpose it was designed for as described in this manual.
• The manufacturer is not liable for any damage caused by incorrect operation and improper use.
• Keep the appliance and electrical plug away from water and other liquids. In the event the appliance falls into water, immediately remove the power plug from the socket. Do not use the appliance until it has been checked by a certified technician. Failure to follow these instructions will cause life threatening risks.
• Never attempt to open the housing of the appliance by yourself.
• Do not insert objects into the housing of the appliance.
• Do not touch the plug with wet or damp hands.
• DANGER OF ELECTRIC SHOCK! Do not attempt to repair the appliance by yourself, repairs are only to be conducted by qualified personnel.
• Never use a damaged appliance! When it’s damaged, disconnect the appliance from the socket and contact the retailer.
• WARNING! Do not immerse the electrical parts of the appliance in water or other liquids.
• Never hold the appliance under running water.
• Regularly check the power plug and cord for any damage. When damaged it must be replaced by a service agent or similarly qualified person in order to avoid danger or injury.
• Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. Never pull the power cord to unplug it from the socket, always pull the plug instead.
• Make sure that the power cord and/or extension cord do not cause a trip hazard.
• Never leave the appliance unattended during use.
• WARNING! As long as the plug is in the socket the appliance is connected to the power source.
• Connect the power plug to an easily accessible electrical socket so that in case of emergency the appliance can be unplugged immediately.
• Never carry the appliance by the cord.
• Do not use any extra devices that are not supplied together with the appliance.
•  Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
• Never use accessories other than those recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories.
• This appliance should not be operated by persons with reduced physical, sensory or mental capabilities, or persons that have a lack of experience and knowledge.
• This appliance should, under any circumstances, not be used by children.
• Keep the appliance and its power cord out of reach of children.
• WARNING: ALWAYS switch off the appliance and unplug from power socket before cleaning, maintenance or storage.

Special safety regulations

• Do not use the appliance near explosive or flammable materials, credit cards, magnetic discs or radios.
• ATTENTION! This appliance is only suitable for use with R40 or BR40 types of incan-descent light bulbs (2 light bulbs included, to be ordered as spare part: article number 919200 / 919217).
• This appliance is intended only for keeping food warm in commercial use. Any other use may lead to damage of the appliance or personal injury.
• Do not use this appliance for cooking food products, heating substances which are flam-mable, dangerous or otherwise unsafe.
• Use the appliance only as described in this manual.
• Place the appliance on a stable, level and non-slippery surface.
• This appliance is suitable use for an ambient temperature from 15°C ~ 30°C.
• Do not install light bulbs with a power level greater than 250 Watts.
• DANGER OF BURNS : Do not touch the appliance while in use. The appliance be- comes hot during use.
• Always allow the appliance to completely cool down before cleaning. The bulb shell is still very hot even switch off for some time.
• WARNING! Make sure the appliance is placed firmly on a stable, level & horizontal sur-face.
• CAUTION! Make sure the screw for height adjustment is tightened firmly.
• 0.3 Keep at least 0,3m distance from the lighted bulb.

Intended use

• This appliance is intended for professional use.
• The appliance is designed only for warming, and not for illuminate. Any other use may lead to damage to the appliance or personal injury.
• Operating the appliance for any other purpose may deemed as a misuse of the device. The user shall be solely liable for the improper use of the device.

Grounding installation
This appliance is classified as protection class I and must be connected to a protective ground. Grounding reduces the risk of electric shock by providing an escape wire for the electric current.
This appliance is fitted with a power cord that has a grounding wire and grounded plug. The plug must be plugged into an outlet that is properly installed and grounded.

Preparation for first use

• Check to make sure the appliance is undamaged. In case of any damage, immediately contact your supplier and do NOT use the appliance.
• Remove all packaging material and protection film (if applicable).
• Keep the packaging if you intend to store your ap-pliance in the future.
• Clean the appliance as explained below at the cleaning and maintenance topic.
• Position the appliance in such a way that the plug is accessible at all times.
• Place the appliance on a level and steady surface, unless mentioned otherwise.
• Place the support arm into the stand.
• Set the height of the support arm and insert the screw to lock the arm in place.
• Tighten the mounted light bulbs well.
• The new light bulbs will process fumes for about 3 till 4 hours (smoke & odor).
  Note: GN container not included! Suitable for GN 1/1 container.

Usage

• Insert the 2 light bulbs (included).
• Insert the plug into a grounded socket. ATTEN-TION! There is a chance for electrical shocks when not using a grounded socket.
• Turn on the appliance using the switch.
• Place the food in a pan or equivalent directly un-der the light bulbs for the best results.
• If you don’t use the appliance anymore the appli-ance can be turned off using the switch.
• If the appliance is not being used for a longer period of time, remove the plug from the socket.
• ATTENTION! The light bulbs and other parts of the appliance can get hot while operating the ap-pliance.
• ATTENTION! Allow the appliance to cool down completely before touching it.

Cleaning and maintenance

• Always remove the plug from the socket before cleaning the appliance.
• Beware: Never immerse the appliance in water or any other liquid!
• Clean the outside of the appliance with a damp cloth (water with mild detergent).
• Never use aggressive cleaning agents or abra-sives. Do not use any sharp or pointed objects. Do not use petrol or solvents! Clean with a damp cloth and detergent if necessary. Do not use abrasive materials.
• Turn off the appliance before replacing any light bulbs.

Troubleshooting

If the appliance does not function properly, please check the below table for the solution. If you are still unable to solve the problem, please contact the supplier/service provider.

the electrical outlet.

| Check the plug
Switch is off| Turn the switch on
Light bulbs are loose or are defective| Tighten or replace the light bulb
Lamp bulb has burnt out.| Replaced the bulb with the same type

and rating.

Technical specification

• Item no.: 273906 / 273913
• Operating voltage and frequency: 220-240V~ 50/60Hz
• Rated power: 2 x Max 250W
• Protection class: class I

Lamp bulb characteristics

• Item: 919200 / 919217
• Shape: R40
• Dimension: (D)125 x (H)170mm
• Type of lamp bulb: E27 fitting in screw type, shat-terproof

Light characteristics

• Beam angle: 200°
• Light colour: Warm white / Red
• Minimum distance from lamp bulb: 0.3m Shape of shade : Cylinder
• Colour of the product : silver / black Dimension of th shade: Ø158x(H)200mm Dimension of product: 453x360x(H)590-790mm
• Supply voltage: 220 – 240V~ 50/60Hz
• Light bulb rated power : 250W
• Mercury content : 0 mg

Remark: Technical specification is subjected to change without prior notification.

Warranty

Any defect affecting the functionality of the appliance which becomes apparent within one year after purchase will be repaired by free repair or re-placement provided the appliance has been used and maintained in accordance with the instructi-ons and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, state where and when it was purchased and include proof of purchase (e.g. receipt).
In line with our policy of continuous product development, we reserve the right to change the pro-duct, packaging and documentation specifications without notice.

Discarding & Environment
When decommissioning the appliance, the product must not be disposed of with other household waste. Instead, it is your responsibility to dispose to your waste equipment by handing it over to a de-signated collection point. Failure to follow this rule may be penalized in accordance with applicable regulations on waste disposal. The separate col-lection and recycling of your waste equipment at the time of disposal will help conserve natural re- sources and ensure that it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste for recycling, please contact your local waste collection company. The manufacturers and importers do not take responsibility for recycling, treatment and ecological disposal, either directly or through a public system.

References

• hendi.com
• Welkom - HENDI Tools for Chefs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>