HENDI 229200 Potato Peeler Kitchen Line Instruction Manual

HENDI 229200 Potato Peeler Kitchen Line

Safety regulations

• This appliance is not intended for household use.
• Only use the appliance for the intended purpose it was designed for as described in this manual.
• The manufacturer is not liable for any damage caused by incorrect operation and improper use.
• Keep the appliance and electrical plug away from water and other liquids. In the event the appliance falls into water, immediately remove the power plug from the socket. Do not use the appliance until it has been checked by a certified technician. Failure to follow these instructions will cause life-threatening risks.
• Never attempt to open the housing of the appliance by yourself.
• Do not insert objects into the housing of the appliance.
• Do not touch the plug with wet or damp hands.
• Danger of electric shock! Do not attempt to repair the appliance by yourself, repairs are only to be conducted by qualified personnel.
• Never use a damaged appliance! When it’s damaged, disconnect the appliance from the socket and contact the retailer.
• Warning! Do not immerse the electrical parts of the appliance in water or other liquids.
• Never hold the appliance under running water.
• Regularly check the power plug and cord for any damage. When damaged it must be replaced by a service agent or similarly qualified person in order to avoid danger or injury.
• Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. Never pull the power cord to unplug it from the socket, always pull the plug instead.
• Make sure that the power cord and/or extension cord do not cause a trip hazard.
• Never leave the appliance unattended during use.
• Warning! As long as the plug is in the socket the appliance is connected to the power source.
• Turn off the appliance before unplugging it from the socket.
• Connect the power plug to an easily accessible electrical socket so that in case of emergency the appliance can be unplugged immediately.
• Never carry the appliance by the cord.
• Do not use any extra devices that are not supplied together with the appliance.
• Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
• Never use accessories other than those recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories.
• This appliance should not be operated by persons with reduced physical, sensory or mental capabilities, or persons that have a lack of experience and knowledge.
• This appliance should, under any circumstances, not be used by children.
• Keep the appliance and its power cord out of reach of children.
• WARNING: ALWAYS switch off the appliance and unplug from power socket before cleaning, maintenance or storage.

Special Safety Regulations

• This appliance should be operated by trained personnel only.
• Do not place the appliance on a heat source (gasoline, electric, charcoal cooker, etc.) Keep the appliance away from any hot surfaces and open flames.
• Do not use the appliance near explosive or flammable materials, credit cards, magnetic discs or radios.
• Always operate the appliance on a level, stable, clean, heat-resistant and dry surface.
• Do not operate this appliance by means of an external timer or remote-control system.
• Never bypass any safety locks and switches on the appliance.
• WARNING: Keep all ventilation openings in the appliance clear of obstruction.
• WARNING: ALWAYS keep hands, hair, and clothing away from the moving parts.
• Allow at least 15 cm of space around the appliance during use for ventilation purposes.
• Caution! Securely route the power cord in order to prevent unintentional pulling or contact with the heating surface.
• Do not wash the body of the appliance with water or a waterjet. Washing with water can cause leakage which increases the risk of electric shock.
• Do not clean or store the appliance until it is completely cooled down.
• Do not move the appliance while in operation. Unplug the appliance when moving and hold it at the bottom.
• Do not operate the appliance without content to avoid overheating.
• Never operate the appliance without the lid and rotating plate installed.
• No parts are dishwasher safe.

Intended use

• This appliance is intended for professional use and can be operated only by qualified personnel.
• This appliance is designed only for peeling potatoes in commercial use. Any other use may lead to damage of the appliance or personal injury.
• Operating the appliance for any other purpose shall be deemed a misuse of the device. The user shall be solely liable for improper use of the device.

Grounding installation
This appliance is classified as protection class I and must be connected to protective ground. Grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is fitted with a power cord that has a grounding wire and grounded plug. The plug must be plugged into an outlet that is properly installed and grounded.

Product description

Accessories

1. Expansion bolt
2. Drain hose
3. Hose clamp

Control panel

Emergency button

• In case of emergency (e. g. blockage, abnormal vibration or noise etc.), press the button immediately. The appliance stops. All the other buttons/switches are deactivated until the emergency button is reset.
  Note: To reset the emergency button, rotate it clockwise, until it pops out to the initial position.

Pulse button

• Use to discharge the peeled potatoes.
  Note: Do not press the pulse button during the peel-ing operation.

Power-on indicator

• The indicator is on when the appliance is connected to the mains and power on.

Operating indicator

• The indicator is on while the motor is operating.

Timer knob

• Turn the timer knob to the desired operating time (0-8 minutes) to start the machine.

Preparations before installation

• Remove all protective packaging and wrapping.
• Check the appliance transport damages. Make sure all the parts are supplied. In case of in-complete delivery (e.g. drain hose, hose clamps, expansion bolts) or damage, contact supplier immediately. DO NOT use the appliance. (See; Warranty).
• Clean the appliance before use (See; Cleaning and Maintenance).
• Make sure the appliance is completely dry.
• Keep the packaging if you intend to store your appliances in the future.

Installation

• Ensure the machine is placed in a dry area and that surface is level and has sufficient strength to support the machine.
• Ensure that the electrical power supply corresponds with the rating label on the machine.
• Ensure there are no obstructions nearby.
• CAUTION! Never bypass any safety locks and switches on the appliance.
• Ensure the expansion bolts (supplied) are installed to the metal plates (on the feet) to fix the appliance.
• In any case, installation should be carried out by taking into account any applicable industrial safety regulations in force.

Connection to water supply and drainage system

1. Connect to water supply by means of the supplied hose (Ø12.5mm x 150cm) and 3/4 “ couplings. Proceed as follows:
2. Connect a hose to inlet at the backside of the machine (Location A).
3.  Connect the other end of the hose to the water supply (Location B).
4. The appliance includes a water valve for controlling of water flow conveniently.
5. Connect to drainage system by means of the supplied hose (Ø25mm x 180cm) and hose clamps. Proceed as follows:
6. Put the hose clamps onto the hose.
7. Connect a hose to the joint of the junk basin (Location C) and affixed by the hose clamps.
8. The other end of the drain hose is inserted into the drainage system (Location D).

Operation

Attention: This appliance has a safety system that ensures will prevent operation unless the lid is correctly placed.

1. Open the transparent lid by pulling handle A until it clicks open.
2. Put the rotating plate in and load the tank with the product to be processed.
3. Lock the lid and make sure the outlet door B is locked.
4. Connect the water supply and switch on the water valve. Make sure water is flowing in. (see “Connection to water supply and drainage system”).
5. Switch on the mains’ power. Power-on indicator C will go on.
6. Start the machine by turning the timer F on the required working-cycle time length, the operat-ing indicator D will go on.
7. When the set time is reached, the machine will stop automatically and the operating indicator will go off.
8. 8. Open the outlet door B after preparing a container. Then press pulse button E to rotate of the disk. Meanwhile, hold the outlet door until get-ting all potatoes.
      DANGER — CAUTION: Never put your hand inside the outlet door. If there is any accident occurs, please press the emergency button immediately.

WARNING! The appliance should not be operated without load.
NOTE: Remove the peeling plate and check the waste outlet pipe for blockage for each cycle.

Important

• WARNING! Never insert your hands in the appli-ance while in operation.
• Do not use wooden/metal or plastic objects to scrape ingredients.
• Never use frozen potatoes.

NOTE: The appliance is equipped with two safety switches.

• The reed switch is equipped with a magnet mechanism. The appliance stops automatically when the upper lid or the outlet lid is opened during operation.
• Over-current protection switch (Circuit breaker) is designed to protect the electrical circuit from damage caused by excess current as a result of an overload or short circuit. The switch interrupts current flow after a fault is detected.

Note: To reset the switch, press it after the issue is solved.

Cleaning and Maintenance

Attention: Always unplug the appliance from the electrical socket and let it cool completely before cleaning and storage.
Cleaning

• Clean the appliance before and after each use.
• Never immerse the appliance in water or other liquids.
• Clean the cooled exterior surface with a slightly damp cloth or sponge with some mild soap solution.
• Make sure to clean the upper lid (incl. the gas-ket), delivery chute and basins. Dry with a soft dry cloth.
• Open the upper lid and remove the peeling plate from the peeling chamber. Clean the peeling plate and peeling chamber interior with a suitable brush. Rinse them with clear water afterward.
• Never use abrasive sponges or detergents, steel wool or metallic utensils to clean the interior or exterior parts of the appliance.
• If the appliance is idle for a long time, make sure to lubricate all metal before use.

Storage

• Store the appliance in a cool, clean and dry place.
• Wipe the outside of the machine at least once a month with a soft damp cloth and, if necessary, a little mild detergent.

Troubleshooting

If the appliance does not function properly, check the below table for possible solutions. If your problem isn’t solved by one of these solutions, please contact the supplier/service provider.

The appliance does not start

| Make sure it is plugged in.
Make sure the safety circuit breaker is closed.
Make sure the emergency button is not triggered.
If the problem occurs after a long period of intensive use, the motor may have overheated. Wait at least 20 minutes and try again. If you put the appliance in a cool place, this will reduce the waiting time.

Technical specification

Remark: Technical specification is subjected to change without notification.

Circuit diagram

Exploded drawing and part list

Warranty

Any defect affecting the functionality of the appliance which becomes apparent within one year after purchase will be repaired by free repair or replacement provided the appliance has been used and maintained in accordance with the instructions and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, state where and when it was purchased and include proof of purchase (e.g. receipt). In line with our policy of continuous product development, we reserve the right to change the product, packaging, and documentation specifications without notice.

Discarding & Environment

When decommissioning the appliance, the product must not be disposed of with other household waste. Instead, it is your responsibility to dispose to your waste equipment by handing it over to a designated collection point. Failure to follow this rule may be penalized in accordance with applicable regulations on waste disposal. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local waste collection company. The manufacturers and importers do not take responsibility for recycling, treatment and ecological disposal, either directly or through a public system.

References

• hendi.com
• Welkom - HENDI Tools for Chefs
• hendi.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>