Skyfan SKYWCM-2 DC LCD Wall Controller Instruction Manual
- June 6, 2024
- Skyfan
Table of Contents
Skyfan SKYWCM-2 DC LCD Wall Controller
WARNING :
FOR YOUR SAFETY, ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A LICENSED
ELECTRICIAN IN ACCORDANCE WITH AS/NZS 3000 WIRING RULES. A CIRCUIT BREAKER
(10A) TYPE C ACCORDING TO AS/NZS 60898-1 SHALL BE INSTALLED.
NOTE : WITHOUT LIGHT MODELS ONLY
Images are for reference only and may vary slightly from actual product. Wall Control Module Installation Manual Rev 1
CAUTION
Read Instructions Carefully For Safe Installation and Fan Operation
MUST BE INSTALLED BY A LICENSED ELECTRICIAN
ELECTRICAL WIRING DIAGRAM
Using 1 wall controller to control 1 x Skyfan DC Without Light Ceiling Fan.
- Connect “LIVE” supply to “L” on the controller,
- Connect fan to “L1” of the wall controller.
- Connect” NEUTRAL” to “N” of the wall controller.
- Turn isolation switch “ON” a beep’ sound will be heard, and within 20 seconds, press and hold on the wall controller for 3 seconds. The fan will emit another ‘beep beep’ sound to indicate the pairing process is activated.
Using 1 wall controller to control 2 or more Skyfan DC Without Light Ceiling fans. NOTE: ONLY 1 (MASTER) FAN CAN BE CONNECTED TO CONTROL BOX. MAX 80 WATTS.
- Connect “LIVE” supply to “L1” on the terminal controller.
- Connect master fan to “L” of the wall controller.
- Connect ”NEUTRAL” to “N” on the wall controller.
Pair the Master fan.
Pair the Master Fan first. Turn isolation switch “ON” , a beep sound will be
heard. Within 20 seconds, press and hold button for 3 seconds The fan will
emit another ‘beep beep’ sound to indicate pairing has been successful.
ELECTRICAL WIRING DIAGRAM CONTINUED
Pair the Secondary fans.
Turn secondary fan isolation switch “ON” , a beep’ sound will be heard, and
within 20 seconds, press and hold on the master wall controller for 3 seconds.
The fan will emit another ‘beep beep’ sound to indicate the pairing process
has been successful. Repeat this process for each of the secondary fans.
Pair the Secondary fans.
Turn secondary fan isolation switch “ON” , a beep’ sound will be heard, and within 20 seconds, press and hold on the master wall controller for 3 seconds. The fan will emit another ‘beep beep’ sound to indicate the pairing process has been successful. Repeat this process for each of the secondary fans.
IMPORTANT NOTES FOR MULTI FAN OPERATION
- All secondary fans should be within a 12m radius of the Master Wall controller to ensure reliable connectivity.
- The Multi fan wiring format is different from the Single fan format. This allows the isolation switch to cut power to the Master fan while still being able to operate the other secondary fans.
- It is possible to pair multiple secondary fans at once, as long as all fans can be paired within the 20 second pairing time restriction.
- All secondary fans should have their own isolating switch (not supplied).
INSTALLING THE WALL CONTROLLER
- Fix the wall controller base to the wall with two screws supplied.
- Plug male connector of fascia into female connector of base piece (see diagram).
- Secure the connector into the terminal housing
- Clip fascia onto base ensuring cables are positioned in space provided.
WALL CONTROL OPERATION
Model: SKYWCM-2 Suitable for all Skyfan DC Without Light Models
