Ordtop U-vid Wireless Earbud Bluetooth User Manual Ordtop

: October 27, 2023
: Ordtop

Table of Contents

Ordtop

Ordtop

Ordtop U-vid Wireless Earbud Bluetooth

Ordtop-U-vid-Wireless-Earbud-Bluetooth-Headphones-
Imgg

Specifications

PRODUCT DIMENSIONS: 79 x 0.79 x 0.39 inches
ITEM WEIGHT: 141 ounces
BATTERIES: 2 Lithium Polymer batteries
FORM FACTOR: In-Ear
CONNECTIVITY TECHNOLOGY: Wireless
BRAND: Hardtop

Introduction

Ordtop Wireless headphones function by radio or infrared signal pairing with the device you want to use. To facilitate connections for users, Bluetooth technology is used by many gadgets. Bluetooth-enabled devices may communicate and share data across incredibly short distances utilizing radio signals.

What’s in the box?

2x Wireless Earbud
1x lightweight Charging Case
1x USB-C Cable
3x Ear Caps (S/M/L)

4-Mic Delivers a Clear Call to You

A 13.4mm graphene diaphragm, which has enough bass and naturally connects to the mid and high frequencies, is used in true wireless stereo headphones. You can have crisp, well-sounding conversations wherever you are thanks to the two built-in microphones in each earbud that use call noise reduction.

Smart Touch Control

X7 Waterproof IP

With IP-X7 protection, wireless headphones can withstand daily sprays of water, sweat, and rain. Perfect for travel and exercise. Running, working, reading, sleeping, attending meetings, etc. may all be done while listening to music.

Design for a snug fit

Utilizing an ergonomic half-in-ear design and weighing only 3g each earbud, these wireless Bluetooth earbuds provide a secure and pleasant fit. circular soft silicone ear tips, which are closer to the skin of the ear and more comfortable to use.

Ultra-lightweight and waterproof to IP-X7

Utilizing an ergonomic half-in-ear design and weighing only 3g per wireless Bluetooth earbud, you get a secure and pleasant fit. To ensure a snug fit, the Bluetooth earphones also come with 3 sizes of soft, flexible ear tips. The IP-X7 rated waterproof earbuds offer protection against daily water splashes, sweat, and rain. often used in exercise, travel, gaming, and running.

4-ENC Crystal-Clear Calls and a Noise-Cancelling Microphone

The two built-in microphones in each pair of wireless headphones use call noise reduction to provide clear and audible conversations wherever you are. In order to maintain your voice clean for every call to precisely for hands- free calls and Speak-to-Chat detection, 4-Mics work together to reject noises around you. Make sure both the caller and you are able to hear each other. Design for commuters and businesses.

Frequently Asked Questions

How long does the battery last? in the publication it says that 8 hours, is it true?.****

Unfortunately I never got to experience the battery life because the left earbud stopped pairing with the right one, nor would it no longer connect to the phones as it had previously done.

Do these ear buds work well with iPhones?****

They do.

Can these earbuds be charged on a charge pad in addition to the usb-c cord?****

No these cannot be charged on a charge pad. But being that the left earbud completely stopped pairing with the right earbud, and/or no longer connects to the phones, I returned this item and got my money refunded back to me.

Is there any case cover that would fit these earbuds?****

Just the one they seat in to charger but you maybe can find a cover to get in here ear pod covers or protection little change purse.

How do you activate pairing mode on earbuds?****

Make sure your earbuds are turned off first. If not, hold down the power button while you wait for them to shut off. Press and hold the power button for roughly 10 seconds after they have been turned off. Your earbuds will enter “pairing mode” as a result.

What controls do my wireless earbuds have?****

To put Bluetooth headphones into pairing mode, you typically just need to hold down the power button. Check the instruction manual that comes with your headphones if that doesn’t work. When they’re prepared to go, an LED indicator usually glows blue and red or you’ll hear noise over the headphones.

How can I tell when my earbuds have finished charging?****

When your earbuds are plugged in and charging, the charging case will blink red. The light will cease flickering and remain a solid red colour when it is completely charged.

How can I tell when the battery in my true wireless earbuds is full?****

The charging case’s front has an LED indicator that flashes red during charging and stays red when fully charged. NOTE: In order to prevent the problem of losing the earbuds’ “auto power on and off” features, it is crucial to keep the case charged at all times.

My earbuds need to be factory reset?****

Connect a power supply to the casing. In the meanwhile, tap and hold the control panels for 6 seconds while putting the earphones back in their case. You can reconnect them to your device after resetting them to their factory settings.

Why does just one side of my wireless earbuds function?****

One earbud may stop working for a variety of reasons. Some problems have simple solutions, such as Bluetooth pairing issues or a gadget that just needs to be cleaned or reset. Some problems, such a short circuit, frayed wire, or equipment that have been damaged by water, are more difficult to fix.