VALLOX 279846 Duct Fan User Manual
- June 6, 2024
- VALLOX
Table of Contents
VELOX 279846 Duct Fan
Velox duct fan is designed to be mounted on top of the cooker hood or as an extract air fan in the ceiling structures of the kitchen or the bathroom, for example. The duct fan has one exhaust air outlet collar and three extract air outlet collars, two of which can be plugged. The plugs are delivered with the duct fan. This enables using the duct fan as a cooker fan or a house extract fan. The duct fan has a service door through which the fan can be serviced without disconnecting the duct. The duct fan is compatible with the Vallox Delico PTD EC cooker hood. The duct fan can also be paired with other cooker hoods that are suited to controlling EC fans. The instructions provided in this manual only apply to installation when the Vallox Delico PTD EC cooker hood is used. The duct fan can also be installed without a cooker hood, in which case the duct fan is controlled by means of a separate control panel.
INSTALLATION ABOVE THE COOKER HOOD
Install the cooker hood below the duct fan in accordance with the instructions provided with the cooker hood. Connect the feed and control cables of the hood to the duct fan as shown in the wiring diagram.
DIMENSIONS
EXTERNAL ELECTRICAL CONNECTION
PERFORMANCE VALUES
MAINTENANCE OF THE DUCT FAN
- Remove the cover panel or spice cabinet above the cooker hood.
- Unscrew the screws of the duct fan’s service door (10 pcs).
- Open the fastening nuts, washers, and damper rubbers of the fan and remove the fan.
- Service the fan and sweep the ducts where required.
- Assemble in reverse order.