BLACK SHARK GOBLIN X4 2.4Ghz Wireless Gaming Headset User Manual

June 15, 2024
BLACK SHARK

BLACK SHARK GOBLIN X4 2.4Ghz Wireless Gaming Headset

Thank you for purchasing the BLACK SHARK Goblin X4 Wireless Gaming Headset. Please read this manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

PACKAGE CONTENTS

BLACK SHARK GOBLIN X4

BLACK-SHARK-GOBLIN-X4-2-4Ghz-Wireless-Gaming-Headset-
FIG-1

  • A. Adjustable Padded Headband
  • B. Ultra-soft Breathable Memory Foam Ear Cushions
  • C. Microphone Jack
  • D. Volume Wheel
  • E. Power Button
  • F. Mic Mute Button
  • G. Status Indicator
  • H. USB-C Charging Port
  • I. 3.5 mm Audio+ Mic Jack
  • J. RGB Lights On/Off Button
  • K. EQ Mode Switch Button

REMOVABLE ULTRA-CLEAR MICROPHONE

BLACK-SHARK-GOBLIN-X4-2-4Ghz-Wireless-Gaming-Headset-
FIG-2

USB WIRELESS TRANSCEIVER

USB-C CHARGING CABLE

3.5 MM COMBO CABLE

BLACK-SHARK-GOBLIN-X4-2-4Ghz-Wireless-Gaming-Headset-
FIG-5

USER MANUAL & WARRANTY CARD

SPECIFICATIONS

Model BS-X4
Driver Diameter 50 mm
Headphone Sensitivity 111 dB± 3 dB
Headphone Frequency Response 20 Hz – 20 kHz
Headphone Impedance 320±15%
Rated Input Power 10mW
Max Input Power 30mW
Microphone Type Electret microphone
Microphone Sensitivity -35 dB± 3 dB

Microphone Frequency

Response

| 100 Hz-10k Hz
Microphone Impedance| 2.2k fl
Pick-up Pattern| Unidirecti o nal
Connection Type| Wireless 2.4GHz, Bluetooth 5.2, 3.5 mm
Wireless Transmission Distance| 1Om (no-obstacle range)
Play Time (varies by volume

level and content)

| 60 h (when RGB lights are off)
Charging Time| 2.5 h
Battery Capacity| 1000 mAh
3.5 mm Combo Cable Length| 1.2 m / 3.9 ft
Charging Cable Length| 1.0 m / 3.2 ft
Weight| 320 g / 11.3 oz
Compatibility| PC, PlayStation, Xbox, Switch,

Smartphones, etc

GETTING STARTED

CHARGING YOUR HEADSET

Connect your Black Shark Goblin X4 to a powered USB port using the charging cable. For best results, please fully charge your headset before using it for the first time. A depleted unit takes about 2.5 hours to become fully charged.

The headset will automatically tum off when cha!!Jing.

STATUS INDICATOR BEHAVIORS

When plugged in

Indicator

| Battery Status
Static red

| Charging
Static green | Fully charged
When unplugged

Indicator| Audio Prompt| Battery Status
Blinking red | Low power| Low ( 15%)

CONNECTING YOUR HEADSET

A. TO DEVICES VIA USB PORT

  1. Plug the USB wireless transceiver into your devices.
  2. Press and hold the power button until the status indicator lights up, or until you hear an audio prompt.
  3. Wait until the status indicator briefly changes to static blue indicating that the headset is now connected to the USB wireless transceiver.
    Indicator| Status
    ---|---
    Blinking blue  | Pairing
    Static blue          | Connected
  4. Make sure your Black Shark Goblin X4 is the default input and output audio device.

B. TO DEVICES VIA BLUETOOTH 5.2

  1. When the headset is off, press and hold the power button for 6 seconds to power on and enter pairing mode.
  2. From power-on to entering pairing mode, you will hear two audio prompts, the status indicator will light up and change to blinking blue.
  3. Enable Bluetooth on your mobile device and select “Black Shark Goblin X4” from the list of device found.
  4. Wait for pairing to complete. You will hear a audio prompt once your headset has successfully paired and connected to your device.
    Once the headset has been paired it wt!! automatically try to connect to the last paired device each time it is powered on.

C. TO DEVICES VIA 3.SMM AUDIO + MIC JACK

  1. If your device has a 3.5mm audio + mic combined jack, simply plug the 3.5mm combo cable from your headset into your device’s audio jack.
  2. Make sure your Black Shark Goblin X4 is the default input and output audio device.
    EQ mode switch button/ Mic mute switch button/ RGB lights on/off button/ and power button are not ava1Jab/e for this connection type.

USING YOUR HEADSET

POWER BUTTON FUNCTIONS
  1. Power ON/OFF
    Power your headset on or off by holding the power button for 3 seconds or until you hear an audio prompt.

  2. Reset your headset
    Reset your headset and clear the pairing list by holding the power button for 10 seconds with the headset off.

EQ MODE SWITCH BUTTON FUNCTIONS

  1. Switch EQ modes
    Press the EQ mode switch button to switch among Gaming Mode, Music Mode, and Live Mode.

  2. Reset your headset
    Reset your headset and clear the pairing list by holding the EQ mode switch button for 6 seconds with the headset on.

ADJUSTING THE VOLUME
Rotate the volume wheel to increase or decrease the volume.

USING THE ULTRA-CLEAR MIC
Plug the mic the into mic the diaphragm headphone is in and front bend and until the it air is vent parallel is facing to your away mouth. from your Make sure mouth.

MUTING/ UNMUTING THE MICROPHONE
Press the mic mute button to mute or unmute the microphone.

EXTENDING YOUR HEADSET’S LIFESPAN
We recommend stretching the headset gently apart before placing it over your head so as to minimize headband stress. However, please avoid overstretching the headset beyond its limit.

TURN ON/ OFF THE RGB LIGHTS
Press the RGB lights on/off button to turn the RGB lights on or off.

SAFETY INFORMATION

Avoid Hearing Damage
permanent Using the hearing earbuds loss. To at a reduce high this volume risk, keep for a the long volume time at a may safe cause and comfortable level.

Traffic Security
To can Using reduce cause a an device the risk accident. while of driving, Follow accidents, even local always with driving a fully laws hands pay and free kit, attention regulations distracts while while you driving. using and this device.

Interference with Medical Equipment
This follow all device rules may and cause regulation medical of hospitals equipment and to health care malfunction. facilities. Do Therefore, not use your performance device of in hearing prohibited aids areas. and Some peacemakers. wireless devices Consult may your affect service the a prevent provider minimum for potential more distance of 15 information. interference. cm It between is Peacemaker a mobile recommended device manufacturers to and hold advise the peacemaker keeping device to
opposite the peacemaker, and not to carry the device in your front pocket.

Battery
This product contains a lithium-ion battery. WARNING! There is a risk of explosion if the battery is replaced by an incorrect type. Do not attempt to remove, open, crush, puncture, short circuit, dispose of in fire or water, or expose battery to temperatures higher than 40 C. Dispose of used batteries according to local regulations.

Battery Replacement
Your devices battery is built-in and non-removable. The battery can be replaced only by an authorized service partner, whose contact information can be found on the Warranty card. The operating temperature of the device is -30 to 55 C. Avoid environments that are dusty, damp, dirty, or have magnetic fields. Keep the device away from extended-period direct sunlight, extreme heat/cold, fire, microwave, or high-pressure containers. Such environments may damage your device or accessories.

Correctly dispose of this product. This icon indicates that this product should not be disposed with other household wastes throughout the EU. To prevent the environment or human health from being damaged due to uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources.To safely recycle your device, use return and collection systems or contact the retailer from whom you purchase the device.

WARRAMTY & CUSTOMER SUPPORT

For questions, support, or warranty claims, please contact us through one of the region-specific email addresses given below. Please include your Amazon order number and product model number.

For more information. please check on global.blackshark.com

Join Black Shark at global.blackshark.com
Like us on Facebook at facebook.com/BlackSharkGlobal
Follow us on Twitter at twitter.com/blckshrk_global

Manufacturer: Blackshark Technologies (Nanchang) Co., Ltd. Registered Address: Room 815-1, 8th floor, Block A, Huajiang Building, NO.1 Tsinghua Science Park, NO.299, Yupingdong Street, Nanchang Economic and Technological Development Zone, Nanchang City, Jiangxi Province, 330013, CN

FCC ID: 2A2JO-BSX
FCC ID: 2A2JO-BSXR
IC ID: 27499-BSX
IC ID: 27499-BSXR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals