BLACK SHARK LUCIFER T2 Wireless Gaming Earbuds User Manual
- June 5, 2024
- BLACK SHARK
Table of Contents
BLACK SHARK LUCIFER T2 Wireless Gaming Earbuds
Package Contents
BLACK SHARK Lucifer T2
CHARGING CASE
3 PAIRS OF EAR TIPS
CHARGING CABLE
USER MANUAL & WARRANTY CARD
Specifications
Model | BS-T2 |
---|---|
Bluetooth Version | Bluetooth 5.2 Dual Mode |
Transmission Distance | ≤ 10m |
Driver Size | 10 mm x 2 |
Frequency Response | 20 Hz -20 kHz |
Battery Capacity | 40 mAh x 2 (earbuds), 400 mAh |
(charging case)
Charging Time| 2 h
Play Time (varies by volume
level and content)
| 5 h (A total of 20 h with the
charging case)
Charging Type| USB-C
Casing Material| ABS, PC
Cable Material| PVC
Cable Length| 0.3m
Compatibility| Devices with Bluetooth audio
capability
Supported Codecs| SBC, AAC
GETTING STARTED
CHARGING YOUR BLACK SHARK LUCIFER T2
For first-time use, connect the charging case (containing the earbuds) to a USB
port via the charging cable and wait until your Lucifer T2 is fully charged.
For subsequent use, the charging case and earbuds can be charged
independently.
BATTERY INDICATOR FOR THE CHARGING CASE WHEN PLUGGED IN BATTERY INDICATOR FOR THE CHARGING CASE WHEN UNPLUGGED
BATTERY INDICATORS FOR THE CHARGING CASE WHEN CHARGING EARBUDS
Battery indicators flash cyclically when the charging case is charging earbuds.
PAIRING TO A MOBILE DEVICE
When connecting your Lucifer T2, remember to keep it within a meter (1 m) of
your mobile device.
-
Simply open the case to enter pairing mode
You will hear 4 beep sounds while the earbuds are in pairing mode. The indicators on the earbuds will remain white for 2 seconds. The master earbud’s indicator will then flash green and white alternatingly while the indicator light on the other flashes whites every 4 seconds. -
Enable Bluetooth on your mobile device and select “Black Shark Lucifer T2” from the list of devices found.
-
Wait for the pairing to complete. You will hear 4 beep sounds when the earbuds have successfully paired and connected to your device. If the earbuds fail to connect to your audio source, the earbuds will stay in search mode for up to 3 minutes before powering off. If this happens, simply repeat the steps again to pair.
Once the earbuds have been paired, they will automatically try to connect to the paired mobile device each time the charging case is opened or the earbuds are powered on.
GAMING MODE
On the right earbud, triple tap to activate gaming mode. Once enabled, your
earbuds will function at low latency, giving you real-time audio feedback
while gaming. Repeat the same gesture to disable gaming mode and activate
music mode.
USING DIFFERENT SIZES OF EAR TIPS
To improve the wearing experience, please select an ear tip that provides the
best, most secure fit.
POWER ON/OFF
To power off the device, simply return the earbuds to the charging case and
close the case. The same can be done by holding both touch controls for 5
seconds. The earbuds will power back up when you open the case or hold both
touch controls for 3 seconds.
USING THE LEFT/RIGHT EARBUD ONLY
Simply take the left/right earbud out only and connect it to your device.
RESET YOUR LUCIFER T2
Starting with the earbuds in the case:
- Remove the earbuds from the charging case, and the earbuds will turn on. Hold both touch controls for 5 seconds to turn them off.
- Hold both touch controls for 10 seconds. The earbuds will turn on, clear their pairing list, and turn off again.
- Place both earbuds back in the charging case and close the case to reset.
- Open the case again, your Lucifer T2 will turn on and enter pairing mode.
TOUCH CONTROLS FOR EARBUDS
FUNCTION | ACTION | INDICATOR | AUDIO PROMPT |
---|
Power On
| Open the case| ****
Static white for 2 seconds
| ****
2 beep sounds
Hold both touch controls for 3 seconds
Power Off
| Place the earbuds back in the case and close it| ****
Static green for 2 seconds
| ****
2 beep sounds
---|---|---|---
Hold both touch controls for 5 seconds
Pairing
| ****
Open the case
| The master earbud’s indicator will flash green and white alternatingly, and the other will flash white every 4 seconds| ****
4 beep sounds
Connected| None| None| 4 beep sounds
Standby| None| Flash white every 4 seconds| None
Disconnect
| Disconnect via the connected device| ****
None
| 2 beep sounds,
then 4 beep sounds
Voice Assistant| Triple tap the left touch control| None| None
Answer/End a call| Double tap the L/R touch control| Flashes white rapidly
upon an incoming call| ****
None
---|---|---|---
Reject a Call
| Hold the L/R touch control for 2 seconds| ****
None
| ****
None
Play/Pause
| Double tap the L/R touch control| ****
None
| ****
None
Previous Track
| Hold the left touch control for 2 seconds| ****
None
| ****
None
Next Track
| Hold the right touch control for 2 seconds| ****
None
| ****
None
Volume Up/Down| Control the
volume via the connected device
| ****
None
| ****
None
Gaming Mode
| Triple tap the right touch control| Green “breathing” lighting effect| ****
3 beep sounds
Music Mode
| Triple tap the right touch control| White “breathing” lighting effect| ****
2 beep sounds
---|---|---|---
Turn On/Off the Indicators| Quadruple tap the L/R touch control| Indicators on
or off| ****
1 beep sound
Battery Low| None| None| 2 beep sounds
every 60 seconds
Clear Pairing List
| Hold both touch controls for 10 seconds when the earbuds are powered off|
None
| ****
None
SAFETY INFORMATION
Avoid Hearing Damage
Using the earbuds at a high volume for a long time may cause permanent hearing
loss. To reduce this risk, keep the volume at a safe and comfortable level.
Traffic Security
To reduce the risk of accidents, always fully pay attention while driving.
Using a device while driving, even with a hands-free kit, distracts you and
can cause an accident. Follow local driving laws and regulations while using
this device.
Interference with Medical Equipment
This device may cause medical equipment to malfunction. Therefore, follow all
rules and regulations of hospitals and health care facilities. Do not use your
device in prohibited areas. Some wireless devices may affect the performance
of hearing aids and peacemakers. Consult your service provider for more
information. Peacemaker manufacturers advise keeping a minimum distance of 15
cm between a mobile device and a peacemaker to prevent potential interference.
It is recommended to hold the device opposite the peacemaker, and not to carry
the device in your front pocket.
Battery
This product contains a lithium-ion battery. WARNING! There is a risk of
explosion if the battery is replaced by an incorrect type. Do not attempt to
remove, open, crush, puncture, short circuit, dispose of in fire or water, or
expose battery to temperatures higher than 40℃. Dispose of used batteries
according to local regulations.
Battery Replacement
Your device’s battery is built-in and non-removable. The battery can be
replaced only by an authorized service partner, whose contact information can
be found on the Warranty Card. The operating temperature of the device is -15
to 55℃. Avoid environments that are dusty, damp, dirty, or have magnetic
fields. Keep the device away from extended-period direct sunlight, extreme
heat/cold, fire, microwave, or high-pressure containers. Such environments may
damage your device or accessories.
Correctly dispose of this product. This icon indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent the environment or human health from being damaged due to uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, use return and collection systems, or contact the retailer from whom you purchased the device
WARRANTY & CUSTOMER SUPPORT
For questions, support, or warranty claims, please contact us through one of the region-specific email addresses given below. Please include your Amazon order number and product model number
- Amazon US orders: support.us@blackshark.com
- Amazon EU orders: support.eu@blackshark.com
- Amazon CA orders: support.ca@blackshark.com
- Amazon JP orders: support.jp@blackshark.com
For more information. pin check on
global.blackshark.com Join Black Shark at
global.blackshark.com Like us on Facebook at
facebook.com/BlackSharkGlobal Follow
us on Twitter at
twitter.com/blckshrk_global
Manufacturer: Blackshark Technologies (Nanchang) Co., Ltd.
Registered Address: Room 815-1, 8th floor, Block A, Huajiang Building
N0.1 Tsinghua Science Parle, N0.299, Yupingdong Street, Nanchang Economic and
Technological Development Zone, Nanchang City, Jiangxi Province, 330013,
CN FCC ID: 2A2JO-BST1
IC: 27499-BST2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>